Adjust Your Chair Height 10 Simple Tips To Increase Your Comfort

Helen Skeates
Helen Skeates
33 min read

How we position ourselves at our desks has a significant impact on our moods in the modern world. When you spend a lot of time sitting, it’s important to make sure your chair is comfortable. This essay will teach you how to change your chair height and provide you with ten additional suggestions for sitting more comfortably at your desk.

How do I Adjust the Height of my Gaming Chair?

Having a chair that is just right for your height is crucial. It’s just the right height! For assistance in making the necessary adjustments, please refer to the following.

First, get rid of anything that might be under your chair’s legs, and then put a mat or cloth on the floor in front of them. This won’t damage your carpet or hardwood floors.

Second, while standing in front of your desk, bring your arms up straight above your head until they are parallel to the floor (like an airplane). Your arms should be at a right angle to your body, with your elbows pointing out to the sides like the wings of a plane.

Third, rest the upper backs of both hands on the armrests.

Adjust Your Chair Height: 10 Simple Tips to Increase Your Comfort -  Krostrade

Fourth, with your arms parallel to each other and at a 90-degree angle against your body, or as near as you can get them while still holding onto the armrests, stack your hands and hold them in place.

Fifth, once both hands are in a safe place, bend at the elbows until your forearms are touching the desk. Depending on your own preference, you may need to experiment with different distances between them.

How do you Adjust a Chair With 3 Levers?

To set the desired height or depth, step one is to pull the appropriate levers. It’s also important to check that your chair’s height is just appropriate so that you don’t have any discomfort when sitting up straight.

Finally, put all your weight on one foot and lift yourself up and down on your toes to make the necessary modifications so that you can move about the desk easily without limiting the amount of room available under it (this tip does not apply if you use an adjustable -height desk).

How do I Know How High my Chair Should be?

First, set it so you can sit up straight with no leg or back slack.

Step 2: Make sure your feet are flat on the ground when you sit to avoid back pain, and set your desk at a comfortable height (between 18 and 23 inches) so that you don’t have to hunch over to see what you’re working on.

Third, set the height so that you have just enough head and leg room to sit up straight.

How do I Adjust my Chair Height?

To modify the height of a chair, loosen the screw near the front of the seat and raise or lower the chair using the foot lever beneath the chair’s base. Once the seat is at the desired height, tighten the screws with both hands.

There may be a need for a replacement chair if you are having trouble adjusting the height.

How do you Adjust the Angle of an Office Chair?

There are a few ways to alter the recline of an office chair. The most common method of modifying the viewing angle is to raise or lower the screen to your preferred viewing height. Also, check that you have adequate legroom when sitting up straight; too much wiggle room might be just as uncomfortable as not having enough.

Finally, put all your weight on one foot and raise and lower yourself onto your toes to make the necessary modifications so that you may move around the desk freely without limiting the amount of room available under it (this tip does not apply if you use an adjustable-height desk).

Changing the direction that gravity pulls you in is another way to alter the angle at which something is held.

When you lean back in your chair, how does it feel? A problem may exist if the seat is too low and there isn’t enough room for your feet to rest on the ground without dangling.

Steps on Adjusting the Height of a Swivel Chair:

First, reach under the seat and turn the lever or knob.

Adjusting the height of a swivel chair is as simple as pulling up on this knob and releasing it while twisting.

Step 3: If turning the chair doesn’t work, look in the back for a switch that adjusts the height of the front portion (the “seat”). To discover the most comfortable position, try turning it upside down and inside out. Some office chairs will also include wheels at the base to make it simple to adjust the height of the seat in relation to the desk.

Adjust the chair back if additional legroom is required in Step 4. Make sure the height isn’t increased excessively. When seated on a chair with a back that is too high, your feet will hang out, which can be painful after a while and may even create knee or back problems.

Fifth, if the seat is already at its lowest position, don’t lower it any more so that your feet can touch the floor and you can remain stable in your swivel chair.

How to Clean and Maintain an Office Chair

Vacuum Dust and Debris

Vacuum the office chair regularly using the wand attachment. Assuming the wand attachment is smooth, you should be able to vacuum up most dust and dirt without damaging your desk chair. Simply set the vacuum to a low suction setting and run the wand attachment over the chair, back, and armrests to clean them.

Vacuuming your office chair on a regular basis will help it last longer and keep it looking like new, no matter what kind it is. To prevent your office chair from prematurely degrading due to dust and dirt, use the wand attachment.

Look for an Upholstery Tag

Check the tag sewn into the fabric of your office chair if you haven’t previously. Most office chairs, but not all, will have an upholstery tag. The manufacturer’s instructions for maintaining the office chair are included on this label, which is also called a “care tag” or “care label.” In order to identify the safest and most efficient method of cleaning your office chair, see the upholstery tag.

Office chairs typically have a tag sewn into the underside of the seat material. Once you find it, see if there’s a code on it for a free cleaning. One or two letters indicate the most appropriate cleaning method for the fabric of the office chair.

An explanation of the various cleaning codes found on furniture tags is provided below.

  • Office chairs with the most common cleaning code W on their tags should be washed with water or a water-based product.
  • If the cleaning code on the upholstery tag is “S,” then a water-free solvent should be used to clean the chair. Manufacturers of chairs upholstered in natural fibers like cotton, wool, or rayon often advise against using water as a cleaning solvent.
  • The W/S code, as you might have guessed, means that a water-based product or a solvent can be used to clean the office chair.
  • Code X: The X cleaning code indicates that the office chair should be cleaned exclusively by vacuuming or brushing. If your office chair has this cleaning code, you shouldn’t clean it with water or a solvent.

If your chair does not have an upholstery tag, the owner’s handbook should provide information on how to clean it. There should be an owner’s manual with identical care and cleaning recommendations for any office chair that doesn’t have an upholstery tag.

Spot Clean Using Soap and Warm Water

Spot clean your office chair with soap and warm water unless the upholstery tag or owner’s handbook specifies otherwise. If your office chair gets dirty from time to time, all you need is a moist towel and a drop or two of liquid soap to get it looking like new again.

In order to clean your office chair, regular dish soap will do just fine. Just switch to a dish soap with a milder composition. Put a few drops of dish soap on a clean washcloth, then run it under running water. After that, blot the soiled area or areas instead of scrubbing them with a sponge or towel. Blotting helps remove staining substances from textiles. Scrubbing the stain will just spread the dyes or proteins that caused the stain further into the fibers of the garment. When you spot-clean your office chair, don’t forget to blot it.

Test Stain-Removing Products in a Discreet Area

Soap and warm water should be sufficient to clean most office chairs, but for more serious stains, you’ll need something stronger. There are many solutions on the market that claim to remove stains, and many of them use strong cleaning chemicals. However, before committing to utilizing one of these devices, you should give it a try in a non-obtrusive place, such the armrest of your office chair.

If you want to clean a stain off your office chair, you shouldn’t spray the whole thing with stain remover. Try it out in a hidden spot instead. When you do this, you can observe the product’s effect on your desk chair. For instance, the underside of your office chair would be a great place to test out a stain remover. If the product does leave a permanent stain, which we certainly hope doesn’t happen, no one will be able to tell.

It’s important to perform a spot test before using any stain remover on your office chair, whether it’s something you bought at the shop or something more natural like vinegar. If the fabric of your office chair is not damaged or altered in any way, you can move on to the next step.

Apply Conditioner to Leather

To keep your leather office chair from cracking and drying out, condition it once every few months. Full grain leather, rectified grain leather, and split leather are all examples of the many types of leather available. In terms of quality, full-grain leather is at the top of the heap, whereas corrected grain leather is in the middle. There is no artificial leather that doesn’t have a porous surface that soaks up and retains moisture just like any other form of genuine leather.

Natural leather has millions of tiny holes that only become visible under a microscope. These openings, or pores, are what maintain the leather’s moisture level. The pores of a leather office chair will absorb moisture that has settled on its surface, preventing the leather from drying out. But eventually the pores will dry out from lack of moisture. If this isn’t fixed, the leather will eventually crack open and peel.

Applying a leather conditioner to your office chair will help prevent damage from occurring over time. Mink oil and saddle soap are two examples of leather conditioners that can be used to give moisture to the material. They help prevent leather from drying out and cracking because of the water and other compounds they contain. Applying a leather conditioner will help keep your office chair’s leather from cracking and drying out.

The following are some more suggestions for taking care of your leather office chair:

  • If you have a leather office chair, be careful not to spill anything on it.
  • Humidity levels in the workplace should be kept between 40 and 55 percent. When relative humidity drops below 40%, the leather on your office chair can crack and dry up. However, if the percentage is above 55%, it could become overly saturated with water.
  • Leather furniture in the workplace shouldn’t be conditioned more frequently than once every several months. If you condition leather too much, you risk oversaturating it with moisture.
  • You might want to invest in some leather protection. Different from conditioners, leather protectants work to fortify the material’s outermost layer.
  • Keep your leather office chair away from any heat sources like radiators or vents.

Clean and Lubricate Casters

You should clean and lubricate the casters of your office chair regularly to ensure smooth mobility. The wheels on an office chair are housed in metal or plastic components called casters. Plastic, rubber, steel, aluminum, cast iron, and polyurethane are only some of the materials used to construct the wheels. In contrast, the actual dwelling units are typically metal constructions.

Most modern office chairs glide easily and with no effort. However, if you’ve been sitting in the same office chair for a year or more, the casters may get clogged with dirt and dust, making movement across the floor difficult.

Turn your chair upside down and remove any lint, hair, or dirt from inside the caster wheel housing units. Alternatively, you can use a vacuum cleaner to remove any excess debris, or you can use bottled air to blast the debris out of the casters.

It is recommended to use a lubricant such as WD-40 after cleaning the casters of your office chair. To make your office chair glide more easily, simply spray some lubricant into each housing unit. Try to make it a practice to clean and lubricate the casters on your office chair once every six months.

Tighten Fasteners

Obviously, you also need to check the bolts on your office chair and make sure they are secure. If you don’t regularly tighten the screws or bolts (or both) on your office chair, it could become unsteady and even fall over. And if a bolt or nut isn’t tight, your office chair won’t stay put.

To find out where all the fasteners are, check the manual. There are office chairs with a handful of fasteners and others with dozens. Your office chair probably has a few screws or bolts that need to be tightened once you’ve adjusted it.

The right turn of the screwdriver is for tightening a screw. However, if you turn a fastener to the left, you will loosen it. Righty-tighty, lefty-loosey is a handy mnemonic for remembering which way to turn a fastener.

Replace Gas Cylinder

When you raise the height of your office chair, does it quickly return to the floor? In that case, the gas cylinder might need to be changed. Pneumatic lift is generated by a gas cylinder in most height-adjustable office chairs. This cylinder contains pressurized nitrogen gas that is capable of lifting and maintaining the raised position of the office chair.

You won’t be able to lift your office chair if the gas cylinder is leaking or malfunctioning in any other way. The good news is that most gas cylinders are readily available for replacement. Turn your desk chair upside down, unscrew the gas cylinder, and replace it with a new one of the same size and kind using only a screwdriver. To test the new gas cylinder after it has been placed, simply raise your chair.

Adjust Your Chair Height: 10 Simple Tips to Increase Your Comfort -  Krostrade

Keep Away From Direct Sunlight

Protect your office chair from the sun as much as possible. The majority of fabrics and materials, including those used to make office chairs, degrade when exposed to ultraviolet (UV) sunlight. You can’t expect instant results. A desk chair may discolor and dry out if left in the sun for too long.

Protecting your office chair from sun damage doesn’t need working in total darkness. Put your desk chair somewhere that will be primarily shaded during the day. You can also reduce the amount of direct sunlight reaching your office chair by adjusting the blinds or drapes to be only half closed. By following these guidelines, you can prevent your office chair from fading or drying out as a result of exposure to sunlight.

Replace When Necessary

Your office chair may need to be replaced no matter how often you clean and repair it. Office chairs typically last anywhere from seven and fifteen years, according to one study. If your office chair has seen better days and is beyond repair, it is time to get a new one.

A warranty is a must-have for any high-quality office chair. Manufacturer will pay for repairs or replacements of defective parts during the warranty term. If the manufacturer stands behind their goods with a warranty, then you know you’ve found a good office chair.

Keep these cleaning and upkeep guidelines in mind after purchasing a new office chair. Taking these precautions will lessen the likelihood of its failing before its time. Equally important is the condition of your office chair, which can greatly affect your productivity.

10 Great Tall Office Chairs for Standing Desks Reviewed

NOUHAUS ErgoDraft Drafting Chair

The Nouhaus ErgoDraft chair is our top pick for the best ultra tall office chair because it successfully combines a full-fledged ergonomic chair with a tall cylinder underneath to provide you with a really ergonomic tall office chair.

Because they awkwardly try to combine an office chair and a tall stool, most drafting chairs fall short in some areas of ergonomics. As far as we’re aware, the Nouhaus ErgoDraft is the first all-inclusive drafting chair on the market.

Adaptable neck support provided by a repositionable headrest? Check. Backrest that syncs with your movement and reclines to a comfortable 135 degrees? Check. Castors that can be locked to avoid accidental rolling? Check.

The seat of the ErgoDraft is on a tall cylinder that may be raised anywhere from 23.4 to 30.9 inches (floor to seat). To further ensure your comfort, the chair’s footrest may be adjusted to a height that works for you.

The ErgoDraft is a top choice for anyone who needs a tall chair for more than just occasional rest breaks from standing since it offers exceptional long-term comfort.

Unique Characteristics:

  • Extra-high backrest that can be reclined up to 135 degrees.
  • Wheels that can be locked to prevent rolling when not in use.
  • Liftable and swiveling, the headrest on this chair is a generous size.
  • Reclinable footrest

Owners Speak Out

  • This chair works wonderfully with a standing desk. During my breaks, I either sit or lean against the chair while standing.
  • You really need a lofty workstation to make use of this chair comfortably. It’s possible that even at its shortest setting, it might still be too high for a standard office workstation.

MOOJIRS Ergonomic Drafting Chair

Sliding into second place for the best tall office chair is the MOOJIRS Ergonomic Drafting Chair. The S-shaped backrest, mesh material plus independently adjustable footrest together make the MOOJIRS a well-rounded offering.

Sliding into second place for the best tall office chair is the MOOJIRS Ergonomic Drafting Chair. The S-shaped backrest, mesh material plus independently adjustable footrest together make the MOOJIRS a well-rounded offering.

The MOOJIRS Ergonomic Drafting Chair is a close second for the finest tall office chair. The MOOJIRS is comprehensive due to its S-shaped backrest, mesh material, and separately adjustable footrest.

Unique Characteristics:

  • Korean-made, long-lasting mesh material
  • Back support built right in
  • Chair with a Waterfall-Like Edge
  • Foot ring that can be adjusted separately
  • Base made of a durable aluminum alloy
  • It can hold up to 300 lbs.
  • Three-year guarantee

Owners Speak Out

  • The footrest is the proper height, and the seat can be easily adjusted to accommodate different users.
  • I was pleasantly surprised by how well made it was.

Smugdesk Tall Office Chair

The Smugdesk Tall Office Chair has the most sturdy base of any tall chair we’ve tested, making it an ideal choice for very tall individuals who may be concerned about toppling over when working at a drafting table. This is because of the 360-degree swivel and the five-claw base’s generous 25-inch width.

The contoured foam seat features a waterfall edge to improve blood flow to the lower body, and the mesh back is curved at an angle of 3 degrees to promote healthy spinal alignment. Separate controls for adjusting the height of the seat and the pedals are a welcome bonus. If you spend a lot of time at a standing desk, this will help you discover a more comfortable working position.

Unique Characteristics:

  • Stability-enhancing, extra-wide, five-pronged foundation
  • The back and the seat are made of breathable mesh.
  • Back support built right in
  • Both the seat’s height and the foot pedal can be adjusted independently.
  • Armrests that may be adjusted in height to fit the user.
  • Superior assistance for customers
  • Warranty Period: One Year

Owners Speak Out

  • Whether you’re in a lab, an architectural business, or just an office with a height desk, you’ll want to invest in a tall drafting chair like this one. Comfortable, supportive, and airy, it’s an ideal partner for a day at the office.
  • Though I see the rationale behind the waterfall edge seat, I find myself continuously adjusting my sitting position in order to prevent myself from falling off. There isn’t even a reclining option.

Hylone Tall Office Chair

Unique Characteristics:

The Hylone Tall Office Chair stands out due to its detachable arms that may be flipped up out of the way. When you’re ready to go from sitting to standing, you can simply stow your chair away under your standing desk.

The Hylone is unique among drawing chairs in that its back can be adjusted to a rocking position of up to 120 degrees. If you’ve been on your feet for too long, its sturdy tilt and tension control will be a welcome relief. The mesh construction of the curved back also helps to keep you cool over prolonged periods of labor.

  • Curved mesh back for ventilation
  • Mechanical tension and tilt adjustment
  • Warranty Period: One Year
  • Folding arms
  • Chair with a Waterfall-Like Edge
  • Height of seat and footrest can be adjusted separately.

Owners Speak Out

  • To sit so high off the ground is fantastic. The standing desk I bought to use at my home office during the pandemic fits the bill well.
  • The back support is excellent, and the seat is really comfortable. The little padding on the seats is the only thing I have against this product. It was necessary for me to purchase a seat cushion.

Office Factor Drafting Chair

If you are on the shorter side but still need a tall drafting chair with flip-up armrests, this is a preferable option to the Poly and Bark. It’s nearly identical to the prior version, other from a reduced required seat height. People with shorter limbs will appreciate this feature. The foot ring is also adjustable to ensure a snug fit regardless of leg size.

The Office Factor is a tall office chair that is simple to assemble. The screws are perfectly aligned, and the entire process shouldn’t take more than 15 minutes.

Unique Characteristics:

  • Sleek, curving mesh back support
  • Height of seat and footrest can be adjusted separately.
  • Lockable, foldable arms
  • The tilting feature
  • Simple to put together
  • guarantee for 5 years

Owners Speak Out

Cushioning is scant. The smooth motion of the lift also makes it tricky to adjust to the desired height.

Safco 3406BL 3406BV Task Chair

The Safco tall Task Chair is a great option for those looking for an armless drafting chair. Because there are no armrests, persons of varying heights and builds are able to utilize the seat comfortably. The lack of arm rests is a major drawback, making high office chairs unsuitable for much more than brief rest breaks from standing.

The Safco Task Chair’s two best ergonomic characteristics are found in the chair’s back. The backrest may be adjusted in both height and depth to provide the optimal level of support for your back.

Unique Characteristics:

  • Adjustable by ten inches in height
  • Case in vinyl
  • Adjustable in both height and depth, allowing for optimal comfort.
  • Chair with a Waterfall-Like Edge
  • Modular back support
  • Armless
  • Constrained indefinite guarantee

Owners Speak Out

  • The many customization options are a huge selling point for me. In spite of spending up to 10 hours a day at my workbench, I no longer experience any discomfort.
  • The lever makes it simple to raise the seat, but lowering it requires considerable effort.

AmazonBasics Drafting Stool

Is the height of the drafting chairs we’ve recommended so far insufficient? The AmazonBasics Drafting Stool is a low-priced option with a seat height of up to 36.2″, and it comes without arms.

Its sophisticated black leather exterior complements a wide variety of design styles. However, AmazonBasics didn’t mention that this stool is also quite stable. Its wider 24″ base and 21″ foot rest make it more comfortable than chairs with narrower 16″ bases.

Unique Characteristics:

  • Black upholstery made of bonded leather
  • Armless
  • Highest possible seat height
  • Seat pad with a 4-inch thickness
  • Simple to put together
  • Cushioned backrest that can be detached for transport
  • Warranty Period: One Year
  • Sufficiently roomy footing and frame

Owners Speak Out

  • I could tell this was a high-quality item from the first use. With the screws and allen wrench provided, assembly took less than 5 minutes. It has no arms, so I can go as close as I need to my workstation. In addition, it was stable enough to pass my test for instability. No matter how far I stretched or how far I leaned, there was no wobble.
  • The cushioning is generous, however I might use further contouring for enhanced comfort and support. The footrest is also fixed in place and cannot be adjusted.

Flash Furniture Tractor Seat Stool

The Flash Furniture Tractor Stool is convenient and easy to transport because to its lightweight construction (it only weighs 15 pounds). The finest part, though, is the low cost of this tall chair.

When you spend less than $50, you may acquire a stool with a seat height variation of 5.5 inches, giving you the freedom to find the ideal working position for your body. Since it lacks arms, you can easily pull up a chair to your desk.

Although the molded tractor seat provides some support, it should not be used for extended periods of time. To avoid the health risks associated with a sedentary lifestyle, get up and do this.

Unique Characteristics:

  • There are seventeen different color options.
  • Affordable to the average person
  • Rotating molded seat
  • Seat and back made of high-density polymer
  • Armless
  • Seat-back Detachable
  • employs glides rather than casters
  • a restricted guarantee of five years’ duration

Owners Speak Out

  • As a result of my disability, I find it difficult to get around. To get around the kitchen quickly and easily, I use this to get to the sink, fridge, and counter. It’s far more manageable than my wheelchair and lighter than air.
  • Since wheels aren’t included, I had to purchase them individually. Once you’ve got the seat raised, lowering it will take a lot of arm strength.

BenchPro Task Chair

The BenchPro Task Chair is a versatile high chair designed for usage in a wide variety of settings, including laboratories, hospitals, workplaces, and even living rooms. You can rest assured that you are purchasing a high-quality item because it comes with a 10-year, no-questions-asked warranty.

How to adjust your office chair | Wirecutter

This is the most weight that any of the chairs we tested could manage, and it was still fine on this tall chair. Glides are recommended instead if your weight is over 300 pounds, as recommended by the manufacturer. High-quality self-skinning polyurethane foam is used for both the seat and back, making them firm but still accommodating.

Unique Characteristics:

  • Height and recline of backrest can be customized.
  • Adjustable waterfall edge and seat depth
  • Ten-Year, No-Questions-Asked Warranty
  • Polyurethane Foam That Sheaths Itself
  • ANSI/BIFMA and DIN standards conforming
  • Armless
  • An adjustable ring for the foot

Owners Speak Out

  • Both my lab and my home garage now have one of these, which is why I had to get two. For the price, I know this will last me for a long time. Because of the many possible configurations, it can provide optimal comfort for a wide variety of users.
  • This chair is fantastic! The only issue I have with it is how easily it slides. As a quick fix, I recently purchased and installed a set of locking casters. Finally, the issue is resolved.

LCL Beauty Air-Lift Saddle Stool

Benefit from the ergonomic advantages of a saddle stool at your standing desk or other high work surface with the LCL Beauty Air-Lift Saddle Stool. This entails a plethora of changes, the most notable of which are enhanced equilibrium, better upper limb function, and reduced lumbar pressure.

You can buy a huge, luxuriously padded saddle seat in sleek PVC leather for a reasonable price. The foot ring can be adjusted in height and angle to provide the best possible support for your feet. It’s easy to put together, and the one-year warranty is icing on the cake.

Unique Characteristics:

  • A saddle seat’s ergonomic design promotes upright sitting.
  • Seat cushion is 3″ thick and upholstered in PVC leather.
  • An adjustable ring for the foot
  • a guarantee from the maker for a whole year
  • Budget-priced

Owners Speak Out

  • It took me a few weeks to adjust to this tall stool, but once I did, I found that the discomfort in my tailbone injury had greatly diminished. Simple assembly required. I can easily operate my longarm quilting machine at this height.
  • Ideally, it would be a few inches taller than the standing desk I bought and have a backrest for when I need a rest. In addition, the cushioning is little.

Common Questions About Tall Office Chairs for Standing Desks

Here, we’ll address some of the more common concerns people have about tall office chairs, so you can get the most out of your standing desk setup.

How Often Should I Sit While Using a Standing Desk?

One hour of standing for every two hours spent seated is the recommended ratio, according to studies. Keep up a high degree of comfort and vitality without sacrificing efficiency in this way.

If you find that standing for long periods of time tires you out, try breaking up your shifts such that you rest for 30 minutes after standing for an hour.

What Is the Ideal Standing Desk Height from an Ergonomic Standpoint?

It’s important to adjust your desk to the right height for you. With a standing desk, you should aim to maintain a 90-degree elbow flexion when working.

That’s why it’s important to have a workstation that’s at or just below your elbow level. As an illustration, a person of height 5’8″ would do best at a desk that is around 44.8″ high.

What Is the Ideal Tall Office Chair Height?

When using a standing desk, the appropriate chair height is again determined by the angle of your elbows.

Your elbows should be at a 90° to 110° angle from the surface of the standing desk, even when you are sitting in your tall chair. Everything from your forearms to your shoulders is at a natural, unstrained position when you adopt this stance. It also helps you keep your wrists in a natural position in relation to the keyboard.

If your standing desk is height-adjustable, you may simply adjust your desk so that your elbows are at a comfortable 90-degree angle while sitting in any office chair. However, if you have to lower your desk regularly, you might as well just sit down at it and accomplish most of your work that way.

Get a tall chair that can be adjusted to match the height of your standing desk when you’re working in that position. Most folks don’t need anything fancier than a tall chair whose highest point is around 12 inches below their desk’s top.

Most Important Things to Look for in a Tall Office Chair

There is no such thing as a universally applicable tall office chair. Some user-friendly solutions may not be appropriate for you. Here are some things to think about while choosing a high chair for your child.

Seat Height

The most important aspect of a tall chair is its seat height. To be used when standing at a desk, it needs to be able to be raised to a height of 30 inches or more (from the floor to the top of the seat).

Seat Size and Shape

Since you’ll be spending so much time seated at your desk, you should check to see if the chair provides adequate support. Will your rear end feel comfortable there? Is there sufficient give or padding?

The condition of your posterior can also be affected by the seat’s shape. Anatomically, your legs and feet benefit most from sitting on a seat with a waterfall edge. Additionally, contoured chairs are made to disperse weight away from the tailbone and the back of the thighs, so reducing pain and discomfort in those areas. Conversely, Danish surgeon A.C. Mandal recommends a saddle seat as the optimal seating arrangement for extended amounts of time spent seated.


You can choose from a number of different types of upholstery. Mesh and other breathable fabrics are common choices for workers who value comfort over heat. But they don’t last as long and are more difficult to keep clean.

A tall chair upholstered in leather is another option, albeit the quality of the leather will determine the final cost. Bonded leather is breathable yet expensive, easy to clean, and stylish.


If you need to sit for extended periods of time, a backrest is a must-have. But if you’ll be on the go quite a bit, a backless version may be more to your liking. You’ll be more likely to sit up straight and focus on the task at hand.

Obtaining one with a backrest is an option; if you do, go for one that offers lumbar support.


High chairs are available with and without a backrest and arms.

A type without armrests is preferable if you need more floor space or like to be able to get closer to your workbench. Drafting chairs with armrests should be padded to protect users from developing repeated stress injuries like bursitis and cubital tunnel. Another option is to use cushioned armrest pads. Flip-up armrests are the way to go if you want the most flexible seating possible.


As your feet will be unable to touch the ground when sitting in a high chair, a sturdy foot ring is an absolute must. If you’re going to be utilizing the footrest to get out of your seat, it should be metal and quite solid. Furthermore, it needs to be height adjustable so that it can accommodate users with varying leg lengths.

Caster and Glides

When your high chair has wheels, you can roll it wherever you need to go. If you weigh more than 300 pounds or have poor balance, however, using a drafting chair with casters could be problematic because it could roll off when you climb up or down from the chair. Therefore, glides are a much better option than casters.

Weight Capacity

Last but not least, get a high chair that can support your weight. If your weight is 180 pounds, you should shoot for a model that can support at least 200 pounds. This means that the maximum weight that can be safely supported by the chair has been determined through testing.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.