Carpet: Common Question And Answers

Helen Skeates
Helen Skeates
40 min read

You’ve done a lot of research to locate the perfect carpet for your home, but you still have some unanswered questions. You’ve found the correct site if this sounds like you. The most frequently asked questions about carpet are addressed in this FAQ.

Whatever your carpeting needs, we have the answers you’re looking for right here! In order to make an educated decision, use the information in this handbook. Prepare to learn about carpet and fiber varieties, pricing, and a lot more.

It’s time to brush up on the fundamentals of carpets, such as the many varieties and materials used to construct it.


What is broadloom carpet?

Broadloom is a common type of classic wall-to-wall carpet roll. It’s long-lasting, comfortable, and a standout among other things.


It’s easy to bring texture, color, and pattern into any room using rolls. In addition to padding, stain-resistance, and even water-resistant components, certain broadloom carpets offer additional conveniences.

It’s crucial to keep in mind that installing rolls can be tricky. Professional installation may be necessary because this flooring isn’t usually do-it-yourself friendly, and the cost of that can be added to your budget.

What are carpet tiles?

It’s obvious from the name that carpet tiles don’t come in rolls. Stylish, easy to make, and a lot of fun to play with.

In certain cases, carpet tiles have cushioning already built in, so you don’t need to buy any additional materials to install them. Depending on the product and the installation site, you may only need to peel and stick, glue, tape, or lock your tiles in place. In reality, it takes only a few hours to thoroughly carpet a space.

It is possible to mix and match carpet squares to create a fully unique floor for your space because they come in a wide range of colors and patterns. You can also select the degree of coverage, which is an additional perk. You can use tiles to cover an entire wall or just a sliver of it to make an area rug or a carpet runner. It’s up to you, and who doesn’t enjoy having options?

When it comes to cost, tiles are more cost-effective per square foot than broadloom rolls. As such, it is the ideal solution for a rapid and low-cost room makeover.

What is carpet made out of?

Nylon and polyester are two of the most common materials used to make carpets. In addition to these, there are a number of other varieties, but these are the most prevalent.

You have the following choices:

Nylon Fibers:

The majority of carpets are still made of nylon. Static-free, long-lasting and suitable for indoor use. However, direct sunshine can cause it to fade, therefore it should not be used outside. There are stain-resistant treatments that keep it looking its best through the messes of life.

As a Class 1 fire rating, nylon carpets melt rather than burn. This increases their level of protection. As a result, it’s ideal for use in business settings.

Polyester Fibers:

Choosing polyester as your carpeting material is a smart choice because it is largely derived from post-consumer waste. This fiber material is becoming increasingly popular and challenging nylon.

It’s less expensive and just as strong as nylon. It resists fading and stains like no other.

You can choose from a wide selection of colors with polyester, from vibrant pink to a more neutral brown.

What carpet texture options are there?

Loop, cut, and frieze are all types of carpet textures. The way the fibers are placed to produce the flooring’s feel, appearance, and texture are all referred to as “styles.” Additionally, the texture of a floor might have an impact on how long it lasts.

  • Looped fibers are ideal for commercial and high-traffic areas since they are more resistant to wear and tear. In order to maintain their beauty, they do not flatten out or wear out easily.
  • The ends of these fibers are visible on the surface because they have been severed. Loop fibers are more long-lasting, but they’re not as soft to the touch and fantastic for the whole house.
  • Modern aesthetics can be achieved by combining cut and loop fibers in a variety of ways. Adds depth to the design by altering loop and cut heights.
  • It’s also known as twisted carpet. Frieze Fibers: Cutting-edge twisting techniques are used to give the chopped fibers a soft, velvety appearance.

What is carpet face weight?

The density of a carpet can be gauged by looking at its “face weight.” Carpet weight per square yard is measured in ounces. More material has been employed to make a more durable product, hence the higher the face weight, the better.

How can you tell the quality of carpet?

To tell the quality of carpet, you need to consider how it is made. Think about the material and face weight. Quality carpet will be made of premium materials, and have a higher face weight.

Carpet’s construction is an important determining factor in its quality. Consider the face weight and the material. The higher the face weight, the better the quality of the carpet.

Padding serves a number of uses in your home:

  • A cushioned surface reduces the jarring sensation of walking on it. Because of its shock-absorbent characteristics, it also aids in reducing walking weariness.
  • For apartments, condos, and two-story residences, sound-absorbing materials are a need. Using cushioning dramatically improves impact noise ratings and minimizes noise, according to research.
  • Padding is an excellent way to save money and keep your home well-insulated. Warmth in the winter and cooling in the summer can be retained with the help of a vapor barrier.

What carpet padding is best?

The type of carpet you have will have an impact on the type of padding you need. The following is a list of recommended carpet padding thicknesses. What’s the best option? Find out here.

Residential Carpet Padding:

Comfort and suppleness are what residential carpets are all about. Your floor will look better and feel cozier with a thicker carpet pad. Choose a 7/16″ – 11/2″ thick bonded or frothed foam padding.

How to Install Carpet

After learning the basics, you may already have an idea of what kind of flooring you want in your home. Before you make a final decision, you should consider the installation process. The technique of installation can have a significant impact on your overall costs, the longevity of your floor, and the ease with which you can replace it if it is damaged in any way.

Learn more about features including DIY-friendliness, application, and installation alternatives for different carpet varieties.

How do you install carpet tiles?

Carpet tile installation can be accomplished in one of four ways. There are a variety of uses for each approach. Make sure you’re using the right installation method for your computer.

Peel and Stick:

Using a peel-and-stick method It is the quickest and most convenient way to install carpeting. A pre-applied adhesive is covered by a plastic covering and is ready to be used Installing a tile is as simple as peeling off the backing, placing the tile, and pressing hard to ensure it is in place.

A few adhesives leave residue on the flooring, while others don’t at all. Place your hand on the adhesive and see if it leaves a residue on your hand. The residue is usually easy to remove from the subfloor.


Double-sided carpet tape is required for the installation of glue-free carpet tile. Make sure to tape off the entire floor when installing the tiles. Floating carpet tile tabs or double-sided tape can then be used to secure neighbouring tiles to the subfloor. There is more work involved than with peel-and-stick tiles, but it is still much less time consuming than gluing the tiles in place.

Glue Down:

When peel-and-stick or tape-down tiles aren’t strong enough, you’ll want a more permanent solution. You’ll need a pressure-sensitive adhesive, or glue, to hold the tile in place in a high-traffic area.

Apply the glue according to the manufacturer’s recommendations for this installation, and then carefully place the tiles. This is a long-term investment, so make sure you love the floor before you go through with it.


A peg and loop system or interlocking tabs can be used to join interlocking carpet tiles.

These carpet tiles appear like jigsaw pieces, and the installation process is similar. It only takes a few seconds to line the edges and then push them together.

Two of the carpet tiles will have loops, while the other two will have pegs, in a peg and loop design. Snap the loops into the neighboring tile’s pegs to complete the installation. The interlocks will be hidden and just the surface will be visible once the entire floor has been completed.

How do you install carpet rolls?

There are two primary methods for quickly and easily installing carpet rolls on your own. Be aware, both of these alternatives are only appropriate for household use. Professional installation is suggested for high-traffic areas and business establishments.

Tape Down

Make sure there are no strain spots on the carpet roll before taping it down. It’s not necessary to spread it out like you would if you were doing it the old-fashioned approach of installing it.

Do everything it takes to get the flooring inside the room without any seams or corners being cut. Cut with the backing facing up, using a utility knife or a wall trimmer.

The edges of the tape roll should be folded inward to make it easier to apply the tape. If you don’t use the correct brand of tape, you run the risk of voiding the warranty.

Make sure there are no gaps in the seams by taping them before the perimeter. A weighted roller can be used to fix the carpet in place at the end of the process.


Glue-down installation follows the same techniques as carpet tape application. In the same way, you should prepare the roll and fold up the edges to apply the adhesive. To avoid voiding the manufacturer’s warranty, use only the adhesive advised by the manufacturer.

To avoid any gaps, begin the installation at the seams and work your way out to the perimeter. A flat adhesive applicator can be used for this purpose, but make sure that the glue spreads at least six inches across the surface. Before installing any carpet, be sure the adhesive has cured according to the manufacturer’s directions. You’re done as soon as it’s laid and bonded!

What carpet is easiest to install?

There is no stretching, taping, or gluing involved with peel and stick carpet tiles. Just peel the backing off to expose the glue and push the tile firmly to the subfloor to install peel and stick tiles. Carpet tiles are also quite easy to cut, so you don’t have to worry about wasting a lot of material when installing them.

What carpet is easiest to replace?

Carpet tiles are just as straightforward to replace as they are to install. You don’t have to tear up the entire floor if a portion of it is filthy or damaged. It’s much easier to just remove the damaged tiles and replace them with new ones.

A lot of measuring and cutting isn’t required. It’s as easy as putting together a puzzle once again.

Cleaning and Maintenance

Having learned the fundamentals, you’ve also learned how to install carpet yourself. How are you planning to maintain your new floor once it’s done? However, carpeting is known for being prone to soiling and stains. Keep your new flooring looking its best with these helpful cleaning and care suggestions.

How do you clean carpet?

Vacuuming your carpet on a regular basis is the greatest way to keep it clean. This prevents an accumulation of dust and debris on the surface (source). Here’s what you can do in the event of a spill or a spot:

  1. First, remove any excess moisture by using a clean cloth to wipe the area. Avoid spreading the spill by rubbing the affected area.
  2. After that, sanitize the afflicted area with a spray. If you want the greatest results, manufacturers recommend using a cleaner that has been certified by the Carpet and Rug Institute. Take a few minutes to let the cleaner to work its magic.
  3. Until the stain disappears, gently blot it with a fresh towel.
  4. To end, thoroughly clean the affected area by rinsing with fresh water and dabbing it dry with a fresh towel.

Regular deep cleaning every 18 months or so is recommended to maintain your floor looking its best (source). For the greatest results, use a steam cleaning or rent a carpet cleaner. This method injects water into the fibers and dissolves any dirt or stains, then extracts the unclean water from the fibers to leave your flooring clean and fresh.

Superior Carpet Cleaning in St. Louis | Woodard

What is the best carpet cleaner?

What is the best carpet cleaner?

Cleaning sprays aren’t all created equal. It’s actually possible that some of them will gather even more dirt and oil after you’ve used them! Others may contain bleaching or discoloring chemicals. Use a certified Carpet and Rug Institute cleaner to avoid this issue.

Best Homemade Carpet Cleaner

You can make your own spot cleaner if you don’t have the money for a store-bought one or if you just want to use your own products.

warm water – 1 cup

8 ml dish soap, 1/8 tsp (without bleach, oils or moisturizers)

White vinegar, 1 tablespoon, as a base

Note: It’s a good idea to test any homemade cleaner in an unnoticeable area to determine whether it damages or discolors the surface.

How do you remove stains in carpet?

The same procedures you’d use to clear a spill will work to remove set-in stains from carpet.

  1. Allow the cleaner to sit for five to ten minutes after sprinkling it on a small area.
  2. A clean towel can be used to remove the discoloration.
  3. Rinse the affected area with fresh water after the stain has been removed.
  4. Using a second clean towel, blot away any remaining wet.

How often should you replace carpet?

Carpets are typically designed to endure between five and fifteen years (source). Look out for these warning signs to see if it’s time to replace your flooring:

  • The fibers will lose their stain-resistant coatings over time, making the floor more susceptible to stains. Your home will look shabby even if your floor is only a few years old if it’s covered in stains and soiling.
  • Compression and matting: Older carpet in heavy traffic areas will eventually degrade due to wear and tear. The cushioning beneath will also begin to wear out.. In addition to looking bad, this makes the floor less comfortable.
  • Unpleasant smells might be the result of a variety of factors. It could be a result of the accumulation of old oil and dye residue over time. Also, there may be mold or mildew, which can cause respiratory and other health difficulties.

You should replace your carpet after 5-15 years, no matter what indicators you see. This will not only keep your home looking nice, but it will also help keep your family healthy and safe from any filthy or unhealthy situations.

Cost Questions

Even if you have a clear idea of the type of carpet you want, it won’t matter if it’s out of your price range. Find out how much carpet and installation prices are in your area, so that you can plan ahead and have the floor you want.

How much does carpet cost?

There are several variables that can affect the price of carpet. 2020 carpet cost is expected to vary from “$2 to $7 per square foot,” with a wide range of “$1 to $20 per square foot.”

The cost might vary greatly depending on the type of fiber used. Although higher-quality luxury choices are more expensive, they also last longer and perform better.

In addition, the style also influences the price. Typically, rolls will cost more per square foot than tiles.

Additional properties like stain resistance or water resistance should also be taken into account. You should expect to pay a little more for these additional perks.

How much does it cost to install carpet?

“$3.50 to $11 per square foot or $32 to $100 per square yard,” according to HomeAdvisor, is the national average labor cost for installation in 2020. Professional carpet installation might cost anything from $350 to $1,100 for a 10′ x 10′ square room.

What do I need to do before my carpet is installed?

All of your loose objects, dresser tops, gadgets, the bottom row of clothing in your closets and everything under your bed should be removed prior to the installation of your new carpets, in order to ensure that your new carpets are installed in a clean and orderly manner. Instead of placing objects on top of your furniture or bed, please relocate them to a room that isn’t carpeted. It is also a good idea to remove your mattress before installation to avoid the buildup of dust. Artwork, aquariums, and sculptures may need to be relocated by others, so plan ahead of time if this is a concern. Finally, make a note of where you put any valuables or mementos before installation so you don’t forget.

Ideally, the temperature in the room should be between 65 and 80 degrees Fahrenheit 48 hours prior to and 48 hours after the carpet is installed. Because power tools will be used during installation, be sure you have easy access to working electrical outlets. The easiest way to get rid of the odours connected with new carpet and padding is to make sure your heating and cooling systems are working properly.

Do I need to be available the day of installation?

When installing carpet, an adult should be present to go over the installation process and ensure that all of the correct carpet has been chosen. Pets must be kept out of the workplace as well. The person who will be installing your new rug should know that you’ll be home to make any final judgments.

When will the installation start and how long does it take?

Workdays in Chicago typically begin between 8:30 a.m. and 10:00 a.m., but delays are common due to bad weather and heavy traffic. The length of time it takes to complete a certain task depends on the nature of the work. Once old carpet is removed and furniture is relocated, any work over 500 square feet could take up to a full day to complete, depending on how many rooms need to be carpeted. To ensure a satisfactory outcome, please be understanding if an installation takes longer than expected. In the end, it isn’t always certain.

What should I expect during the installation of carpet?

When installing carpet, the installers will need a place where they can cut the carpet and keep their supplies. In addition, the removal of the old carpet and the installation of the new carpet will generate a lot of dust and noise. It’s a little bit like a building job. We don’t recommend hiding cables or other electronics under carpets..

How do I fix squeaky floors?

You’ll want to have any squeaky flooring fixed by a professional or handyman in advance. Prior to scheduling your carpet installation, you should complete some preparatory tasks. The carpet installation method does not include it.

Will I be able to see the carpet seams?

Just as with other types of materials, carpets have seams that are readily apparent. Carpets with little pile, flatweaves, and loops are more likely to have seams that are noticeable. In comparison to other types of carpet, plush and shaggy ones conceal seams better. Discussing seam location before you buy a rug is essential if this is an issue for you. Depending on where the seams are located, the carpet’s total square footage will vary. As a result, there is very little that can be done once the installers are on the job to adjust the layout of the job.

What padding should I select for my carpet?

You can choose from a number of padding options at Home Carpet One. Firmer pads with a density of at least eight pounds should be used under looped carpets. We will either add a 1/4 rebond pad or a 3/8 rebond pad, depending on the carpet price. Felt pads, which are exceptionally firm, will be included for use on stair treads and underneath braided carpets. Rubber pads or Healthinex Memory Foam are available if you prefer a more opulent sensation under your looped carpet. Anti-microbial characteristics are excellent in both of these products, which are fantastic if you have radiant heat in your home. Using a memory foam pad under braided carpets and on staircases is also possible. We also have an all-wool pad called Big Foot if that’s what you’re looking for. We use a softer pad called Luxury with cut pile carpets. These carpets can also be upgraded in the same way.

Is there any way to treat the floor against odors or germs the same day the carpet is installed?

If you wish to treat the floor after the old carpet is removed and before the new carpet is laid, the Healthier Living Flooring Installation System is an alternative. The floor will be vacuumed and treated with an anti-microbial solution called Healthinex before the new carpet is installed for a modest fee. If you’re concerned about pet odors, there are remedies available. We recommend using either a rubber or memory foam pad, both of which are anti-microbial, if you are taking this step.

Why is there extra carpet?

In order to complete your installation, carpet is available in conventional sizes ranging from 12′ wide to 15′ wide. If the room’s dimensions and where the seams are placed vary, it is not uncommon for there to be 15%–20% waste on a given job. Additionally, if your carpet has a pattern, you’ll need extra carpet to match that pattern. Prior to purchase carpet, be sure to ask your installer how much carpet is needed for the task and tell them the dimensions of any pattern match.

Why is my new carpet shedding?

As a result of the manufacturing process, carpets may contain fluff or loose fibers that are visible on the surface or in the vacuum bag. It has been shown that vacuuming up these loose fibers has no impact on the life or appearance of the carpet. These fibers are too huge to be airborne or inhaled because of their size. The majority of shedding fades during the first year of installation with proper vacuuming and the use of a high-quality vacuum cleaner. A vacuum with a beater bar should not be used on wool looped carpet; instead, a suction vacuum should be used.

Why does my carpet seem to change color when I look at it from different directions?

As the pile is pushed in different directions, the light reflects differently. The ideal option is to vacuum the pile in a regular direction, which is usually caused by foot traffic.

Is there a way to avoid seeing footprints?

The finer the fibers used to be, the softer the carpet became (like high-count sheets). The drawback of this new technology is that it reveals foot traffic even on carpets that are looped. Working with a sales representative, choose a carpet with a very tight weave if you want to limit the visibility of footprints.

Some tufts are longer than others. What should I do?

It’s as simple as snipping the end to smooth out the carpet. Avoid yanking out long or loose threads from your carpet, as this might permanently harm it. Snags and loose yarn can be easily fixed by cutting the tuft and letting the surrounding yarn fill in the void.

What can I do about static?

Static electricity can build up in your carpet when the relative humidity in the room is extremely low. Products like humidifiers and other commercially available options may be helpful if this happens.

Should I paint before or after the carpet is installed?

This is entirely up to the artist. If you decide to paint first, make an appointment for the painter to return to touch up the baseboards and possibly a few spots on the walls. Tools are needed to stretch the carpet so that it doesn’t get in the way of the walls or baseboards. When the carpet is cut into place, it will come into contact with the lower area of the walls, which can harm the paint. Typically, it takes 30 days for paint to cure, so it is more vulnerable to damage during this time. During carpet installation, previously painted walls or baseboards are more likely to chip or break, necessitating touch-up paint.

How high should my baseboards be placed above the floor?

Your baseboards should be as close to the floor as feasible if you want to avoid noticing gaps between your carpet and the walls. Therefore, installing baseboards first is critical because carpet will go up to the baseboards rather than under them. Keep in mind that the typical carpet is only 14–38 inch thick. Depending on the thickness of your new carpet, you may need to re-paint your baseboards following the installation.

How can I avoid permanent indentations?

Due to frequent foot activity or the weight of furniture, your carpet’s fibers may become compressed. Indents can be reduced by rotating furniture. You can use the edge of a coin to reposition the pile. It may also help to pass a hot steam iron over the area, but keep the iron at least four inches above the floor. However, requesting a Healthinex Memory Foam cushion will help you avoid any indentations for good.

What do I need to know or do if my floors have radiant heat or drain tiles?

Please tell your sales associate and measurer whether you have radiant heat or drain tile in your home before you begin the installation process. You don’t want either of these systems to be corrupted in any way. The tack strip used to lay carpet must be glued down rather than nailed into place if it is to be installed over radiant heat floors or drain tiles. There must be no paint on the floor along the room’s perimeter before adhering the tack strip. It is crucial to talk with your contractor ahead of time if paint needs to be removed because it will slow down the procedure and result in an additional expense. In order to maximize the efficiency of heat transfer from your radiant heating system, you should use a rubber or memory foam pad.

What options are there if I don’t like the carpet I selected?

All of our Gold, Platinum, and Titanium warranties include a Beautiful Guarantee that allows you to select a new carpet under that warranty system at a lower price point or less within a specified period of time after the installation (60 to 120 days depending on warranty level). Furniture relocation, bespoke labor (such as stair work) or a more expensive carpet are the only fees associated with replacement under the Beautiful Guarantee. Before you can take advantage of the Beautiful Guarantee, you must have the carpet placed. For further information, please visit the store.

How do I select the proper vacuum?

When making a purchase, it’s critical to discuss the specifics of your carpet with a reliable vacuum dealer. In the case of Karastan Silk, Innovia Touch, or Tigressa Cherish, you need a vacuum with the following features: adjustable height, wide wheels, lighter weight model, adjustable motor speed, and the option to modify the brush roll. To prevent abrasion of the fibers in your wool or viscose carpet, you must use a suction vacuum with a beater bar that does not touch the carpet. Carpets will be damaged and warranties void if you use certain high-powered vacuum models with stiff bristles. You are solely responsible for ensuring that the vacuum is working properly.

Does my carpet have a stain warranty?

There are stain guarantees on many carpets at Home Carpet One. Relaxed has no exclusion stain warranties on all of its Lees carpets. Our other carpets come with good stain warranties, and you should inquire about this before making a purchase. In terms of stain resistance or wear and tear, wool carpets do not come with any guarantees. We will give you a warranty and care guide after the installation, but please contact us if you don’t receive one or if you want to see that information in advance of the installation.

Carpet Cleaning Common Mistakes | 2020 | Local Expert Cleaning

Is there any way to make wool, tencel or viscose carpets more stain resistant?

Stain-resistant carpets are easier to clean if a stain-resistant treatment is applied after the carpet has been installed. Stain-proofing the carpet is not possible with these applications. Please ask us for the name of a business that offers this service if you are interested.

What is the best carpet?

Choosing the right carpet for your home depends on a variety of factors, including:

Do you plan to carpet all of the rooms in your house?

• How many people are anticipated to pass through those rooms?

If so, how old are they?

• Do you have a pet at home or do you rent?

• What kind of design aesthetic are you aiming for with your work?

How do I find a great quality carpet?

Take a look at the carpet’s grading/s from an unbiased source. The Australian Carpet Classification Scheme is the primary regulator of carpet grading in this country (ACCS).

Who will install my new carpet?

In most cases, your carpet purchase will include the cost of installation. During the purchasing process, be sure to bring up the subject of installation with your shop.

What type of underlay do I need for my new carpet?

As part of a flooring system, underlay and carpet should always be utilized together. Ask your retailer to match the quality and intended use of your carpet with a high-grade underlay.

What type of vacuum cleaner do I need for my carpet?

We recommend utilizing an upright or high-quality barrel vacuum with a power-driven spinning brush or combo beater/brush bar that rotates across the carpet pile and mechanically loosens soil for collection. Low cut pile carpet is the greatest choice for this technique. When vacuuming loop pile, cut and loop, or berber carpet, turn the brush off or change the head to avoid excessive fuzzing.

Look for the following characteristics when purchasing a vacuum for thick, soft carpet:

When necessary, utilize the highest height option.

Vacuum cleaners have adjustable suction, which allows them to move freely while still removing dirt and other debris.

A vacuum with large wheels is more likely to glide across carpeting with ease.

How often do I need to clean my carpet?

Weekly vacuuming is recommended, with three passes for minor soiling and five to seven runs for more soiled/high traffic areas.

Steam cleaning the carpet should be done every 12 to 18 months, depending on how frequently it is used and the color of the carpet. The dirt and grit that both light and dark colors attract is the same, although the soiling tends to show up more quickly in light colors.

Will the colour of my carpet fade over time?

Feltex manufactures carpet with dyestuffs that are up to date to reduce the likelihood of fading. The color of carpets, like that of other dyed textiles, fades with time when exposed to direct sunshine. When sunlight falls on carpet for an extended period of time, it is recommended that you have some type of window protection (either window tinting, drapes or blinds) in place.

Some of our carpets are more resistant to fading than other options.

Do I need stain protection on wool carpets?

Wool carpets don’t need stain prevention because of the fiber’s natural resistance to dirt, stains, and spills.

Is a wool or synthetic carpet better?

Both wool and synthetic fibers offer excellent qualities, therefore there is no clear winner. Feltex manufactures high-quality carpets in all fiber categories by combining outstanding raw materials with cutting-edge manufacturing techniques.

How wide is carpet?

The usual carpet width in Australia is 3.66 meters (12 feet), but some carpets are created with a width of 4 meters.

How do I know how much carpet I need?

Use our Carpet Calculator to figure out how much carpet you need for your home.

Why can the colour of carpet look different at home?

There are several variables in how light affects your sense of color, and the lighting conditions in a carpet store and at your home will be different. Since color appears differently in different lighting conditions, you should borrow a sample from a carpet merchant and inspect it in different lighting conditions in your own house before making a final decision on your new carpet (e.g. natural daylight versus artificial lighting at night).

Does having carpet in a house increase the risk of asthma and other dust-related allergies?

Dust mite allergens can be increased by a variety of other factors in the home, including carpet, which has long been thought to be the primary culprit.

German Allergy and Asthma Society (DAAB) research indicated that wall-to-wall carpet reduced dust in the air to half of what was discovered above hard flooring surfaces (ALLERGIE konkret 2/5/05). Until the dust is vacuumed out, a well-maintained carpet traps dust particles, keeping them out of the occupants’ airways.

Consumers can learn more about allergens in the house thanks to a resource given by the Carpet Institute of Australia.

What does DPF stand for and what does it mean?

A decitex per filament is referred to as DPF. Carpet fibers’ linear mass density is measured in grams per 1000 meters, which is a unit of mass density. The more filaments per fiber there are, the lower the DPF, and the softer the carpet will be as a result.

What is a woven carpet and how does it differ from a tufted carpet?

Carpets are traditionally marked on looms by weaving. To create elaborate designs, each strand of colored yarn is manually weaved into the carpet. Weave the carpet’s pile and backing together in one step. Axminster carpets are made using a unique construction procedure that ensures their long-term durability and attractiveness.

Machines sew yarn through a material to create tufted rugs (primary backing). Latex (an adhesive) is then put to the primary backing, and a secondary backing fabric is then bonded to stabilize the carpet and give it its final shape and shape.


Congratulations! All of your questions about carpet have been answered. I hope this helps you in your search for the appropriate floor for your room. Check out our assortment and order some free samples if you’re ready to buy.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.