What should you do to soften a mattress that was purchased new? As you continue on, you’ll learn about your five greatest choices.
- How To Assemble Your Reclining Sofa? Step-by-Step Tutorial Update 12/2023
- How To Make A Round Swivel Chair Slipcover? Step-By-Step Guide Update 12/2023
- How Memory Foam Mattress Works Update 12/2023
- How High Should Crib Mattress Be For Newborns Update 12/2023
- How Long Does It Take To Break In A Memory Foam Mattress Update 12/2023
New mattresses typically have a firmer feel, which could be an issue for you.
If your mattress is causing you pain, you should not sleep on it.
Too firm of a mattress can cause a variety of health issues, but you already know that from personal experience.
That’s common for mattresses that have been recently purchased and stored.
But if that happens, we’ll have a chance to fix it. Relax; I’ll show you how to get inside without causing any trouble.
It’s not hard to learn how to break into a stiff mattress if you have a plan to follow.
5 Benefits of A Good Mattress
1. Achieve Adequate, Quality Nighttime Sleep
The major benefit of a good mattress over a bad one is that you always get a decent night’s sleep or nap. Feeling supported in the back and alleviated from pressure points is possible, as can pressure point alleviation, depending on the mattress type.
A quality mattress should aid in getting to sleep and stay asleep. It may be time to replace your mattress if you are experiencing chronic discomfort, sleep disturbances, or morning soreness. If you suffer from persistent back pain, go here now to read about the mattresses doctors suggest most.
2. Promote Good Form and Posture
It’s possible that people don’t even realize how often they switch sleeping positions throughout the night. If you invest in the correct mattress, you can keep or even enhance your shape and posture. If you sleep in the same position night after night, it’s crucial that your mattress supports healthy alignment.
Those who tend to sleep on their sides, for instance, are at increased risk for neck and back pain because of the strain that this sleeping position places on these areas. Since it will be forced against the mattress, it may also impede blood flow to the arms and shoulders. When you sleep on your right side, you put extra strain on your internal organs.
Memory foam mattresses, thankfully, have side sleepers covered. Because of the material’s resilience, it can help keep the spine in its natural position and relieve pressure in key areas. However, if you sleep on your side, your spine and joints may suffer if you choose a mattress that isn’t designed for that. Therefore, when looking for a mattress, it is important to consider your preferred sleeping posture.
3. Keep Your Mental and Emotional Health in Check
Inadequate sleep quality is real and can be caused by a poorly made mattress. Sleeping on a poor quality mattress night after night is likely to cause insomnia at first, and subsequently lead to sleep deprivation. Lack of sleep is associated with a number of negative outcomes, both immediate and long-term, and can have a significant impact on your mental and emotional well-being.
Inadequate sleep has a variety of negative impacts on mental and emotional well-being, including the following.
- Dullness of intellect and lack of focus.
- Result in daytime sleepiness and yawning.
- Causes a rise in irritation and emotional instability.
- Increases the severity of mental illnesses such as anxiety, depression, bipolar disorder, and ADD/ADHD (ADHD).
- Impairs one’s ability to think and act.
If you invest in a high-quality mattress, you’ll reduce your risk of developing any of the aforementioned health problems while you snooze. Keep in mind that even with the most comfortable bed, you probably won’t get the finest sleep possible.
4. Develop an Inclination to Your Sleeping
Some people have trouble falling asleep for a variety of reasons, including a poor mattress. Some people are so busy with their hectic schedules of job, school, and other commitments that they neglect to get enough rest each night. Perhaps your sleep problems can be solved once and for all with the purchase of a new mattress.
If you aren’t feeling rested after a night in bed, your mattress could be to blame. Creating a relaxing bedroom setting can also help you get more shut-eye.
It’s important to give yourself the gift of a good night’s sleep every once in a while. Here are a few suggestions for making your bedroom more conducive to sleep:
- You should only use your bed to sleep or for personal occasions.
- Lessen the amount of background noise and other interruptions.
- Reduce the temperature to a comfortable 65 degrees Fahrenheit or 18.3 degrees Celsius.
- Put any and all electrical devices out of reach.
- Reducing visual noise
- Make your bedroom cozier by painting it in subdued tones.
5. Get the Most Out of Your Purchase
It’s no laughing matter that the going rate for a mattress in 2019 is through the roof. It’s not easy to put up money for a mattress, even the cheapest alternative, especially if you’re already responsible for a lot of other bills and obligations at home.
A good mattress, therefore, is an investment that will last a lifetime. Investing in a high-quality mattress is a wise decision because it will last you for several years, providing you with excellent return on your money spent if it is adequately cared for.
Consider the typical lifespan of several mattress materials:
- 5–6.5 years for an innerspring
- Age of Foam Mattresses: Between 6 and 7 Years
- There is a 5- to 8.5-year latex life span.
- Between 5 and 7.5 years for a hybrid
Steps To Break In A Firm Mattress
Having a high-quality, ultra-comfortable mattress can help you relax and drift off to sleep, which can lead to a restful night.
But what if it’s too sturdy for you?
It is my sincere desire that you find a solution to the issue at hand.
What I’ve said here should make it easier for you to choose a mattress that isn’t as hard as when you first bought it.
Here are a few options on how to ease into your new, firm mattress. Pick one that works best for you!
You may either do everything all, or choose what you want to do, so let’s get started.
Option #1. Getting the air out
The manufacturing process of some mattresses causes them to be very firm.
When they are delivered to your door, they are sealed and packaged, therefore it is important to get rid of the air before opening them.
You get your mattress and spread it out in a large area close to where you plan to put it.
At that point, you can remove the wrapping and let it swell to its full size.
Remember that some mattresses, like memory foam, need time to expand before you can sleep on them.
Some people may find that it isn’t required.
Option #2. Walk over it or apply weight
It is possible to break through a firm mattress by applying force, such as your body weight.
The mattress conforms to your body’s shape and weight, gradually softening over time.
You can make it softer by walking about, sleeping on it, or rolling around on it, but you must use extreme caution.
In order to prevent injuries, a mattress without coils is the safest option for walking on it, and clean feet are essential to avoiding soiling the mattress.
Option #3. Set the temperature
This is a really effective method for keeping in mind the various possibilities available to you.
When sleeping on a firm mattress, increasing the temperature of your bedroom is recommended.
Since applying heat causes an object to expand, this is typically utilized for mattresses.
Option #4. Check out your bed frame
You need to double check that the bed frame you plan to use is appropriate for your mattress.
The problem may not be the mattress itself, but rather the foundation. Building a solid groundwork is essential.
A solid foundation is necessary for the security of any construction, no matter how high it rises.
You can research how to identify a good base for your mattress on visit blogs like krostrade.
It’s important to use extreme caution because it’s very uncommon for people to unwittingly purchase both of these wrongs when they set out to correct one.
Option #5. Consistency
During this initial phase of your connection, you should strive to be as consistent as possible. This is especially important in romantic relationships.
There will be times when the devil’s whisper tells you that the couch is more inviting.
However, if you choose this route, you won’t be doing anything to prevent the softening of your mattress.
Do you recall being able to soften it by rolling over it or sleeping on it? This is the case where it ought to be useful.
You need to maintain a steady routine for this to have any noticeable effect on your mattress.
And to ensure your growing ease and convenience over time. In a short amount of time, you will become accustomed to it.
How to Keep Your Mattress in Good Shape Longer
Here are seven tried-and-true methods for extending the life of your mattress and warding off potential disasters.
1. Make sure your mattress is properly supported.
It’s important to make sure your mattress has the correct amount of support, even though you don’t always need to buy the matching box spring or foundation with a new mattress. This aids in maintaining materials and delaying wear.
The manufacturer or the warranty policy may have some suggestions. Memory foam mattresses and other speciality mattresses typically demand strong, stable support, hence box springs are typically exclusively utilized with spring mattresses.
In order to properly support the mattress and the weight of the person sleeping in it, bed frames must be constructed. Center support bars are especially important for larger bed sizes like queen and king. Depending on the type and weight of the mattress, a platform bed with wide slats may require additional slats for stability.
Every year or so, you should inspect the slats and springs supporting your bed to make sure there are no breaks that could compromise the integrity of your mattress.
2. Use a mattress protector from the beginning.
We’ve talked about how using a mattress protector can help your bed last longer and how simple it is to use.
A high-quality mattress protector will not only keep your bed dry in the event of an accident, but will also keep dirt, dust, and other allergens out of your bed by reducing their ability to settle into the mattress.
This helps to keep allergens like mildew and dust mites from accumulating on the bed, protects the materials on which you sleep from deterioration, and keeps body oils and sweat from damaging the bed. Many modern protectors are as comfortable as a fitted sheet, and they all make cleanups a breeze if mishaps do arise.
3. Wash bed linens regularly.
Sweat, oils, hair, and dead skin cells are all shed during sleep. Crumbs from breakfast in bed and cat fur are just two examples of the mess that can be tracked into the bedroom. All of this, in addition to being gross, can permeate a mattress, providing a fertile environment for bacteria and dust mites.
Most housekeeping professionals agree that washing bed linens once every week to twice every two weeks is optimal. Even if you use a mattress protector, you should still regularly launder your sheets and pillowcases. The mattress protector should be washed on a regular basis as recommended by the manufacturer.
4. Get pets separate beds to snuggle in.
Speaking of things that shouldn’t be allowed to sleep on your bedding, it’s best to provide dogs with their own sleeping quarters.
Even the cleanest pet will track in dirt and grime from outside, drool, and shed hair and cells much like people when they climb into bed with you. Accidents involving pets are another common source of mattress damage.
5. Rotate the mattress regularly.
Rotating a mattress frequently is recommended for all mattresses, regardless of size or construction. Although not all manufacturers recommend it, rotating can assist ensure your tires wear more evenly and can prevent depressions and softness that can occur without it.
You should flip your mattress regularly (every 2 to 6 months) by 180 degrees, beginning at the head and working your way to the foot. During the first couple of years, when you are “breaking in” the mattress, this is very crucial.
6. No jumping on the bed!
If your mom warned you not to jump on the bed, she was right. Rough use can cause premature deterioration of the mattress’s foundation, frame, or foam. This is especially true of spring, water, and air mattresses.
7. Take care when moving your mattress.
Avoid creases and tears by encasing your mattress in plastic before you move. Heavy-duty mattress bags that can be sealed with tape are available at many moving and box stores to protect your bed from dust, water, and scratches.
When transporting a mattress, it is recommended that you stand it up on its side to prevent it from being wrinkled or saggy. Manufacturers of mattress covers often include warnings about against dragging the mattress by its handles.
8. Don’t bring home unwanted hitchhikers.
One of the quickest ways to destroy a mattress is by exposing it to bedbugs, who can be tough to get rid of once they’ve settled in.
Check for bed bugs before getting some shut-eye away from home, and try to avoid sleeping with your bags on the floor. If you think you’ve seen bedbugs, Texas A&M University offers some advice on how to keep them from coming home with you.
Using a mattress encasement designed to prevent bedbugs is a good idea if you live in an apartment or in a portion of the country where these pests are abundant. These are superior than mattress protectors since they encase the entire bed and have sturdy zippers that keep insects from entering.
9. Let the light in occasionally.
Once every two weeks, on a dry, bright day, remove the sheets and let the bed air out for several hours (though if bedbugs are possible, leave the cover on).
This helps prevent excess moisture both from sleepers and humidity, and may also help keep dust mite populations in check according to Kingston University study.
10. Follow manufacturer cleaning directions.
A study conducted at Kingston University found that this helped minimize both human perspiration and ambient humidity, two factors that can contribute to a high dust mite population.
Most beds should be vacuumed with a hose attachment to eliminate surface dust; several manufacturers provide cleaning instructions.
Mild water and soap can be used to spot treat stains, but you should wait until they are dry before changing the bed. Harsh chemical cleaners should be avoided on foams since they compromise foam integrity.
Vacuuming should be done once every one to three months, and stains should be cleaned as needed, depending on dust levels, allergies, or personal taste.
While the specifics of mattress upkeep may vary by make and model, the fundamentals are same across the board. The bed should be kept clean, guarded against accidents and damage, well-supported, and rotated to provide even wear.
There are a lot of variables that affect how long a mattress will last, but following these guidelines will help you get the most out of your purchase and sleep soundly for years to come. Know that a 10-year guarantee on your mattress is considered industry standard, whether you are shopping at a traditional brick-and-mortar store or one of the new bed-in-a-box mattress providers.
Don’t feel obligated to contact the company immediately if your new mattress is on the firm side when it comes.
You only have to think of ways to get into it, and it happens virtually every time someone buys a new one.
It’s a relief to know the answer to the question, “How can you soften a firm mattress?” You can now put this issue to rest.