Light is required to see. The light bulbs are burned off on machines for sewing. When this occurs to a Singer model, you might need to follow specific instructions on how to replace the bulb. Light bulb holders aren’t an ideal place.
- 23 Common Hand Stitches and Their Uses Update 09/2023
- Hem Price List: How Much Does it Cost to Hem Pants or Dress Update 09/2023
- How to Make Low Rise Jeans Into High Waisted? Special Tips and Tricks Update 09/2023
- Troubleshooting a Singer 9410: Tension and Bobbin Problems Update 09/2023
- The Most Quiet Sewing Machine. Why is my Sewing Machine so Noisy? Update 09/2023
How do I change the light bulb inside your Singer Sewing machine there’s a chance that you’ll need two tools to alter the light bulb. The featherweight’s principal tool of choice will be the tubing made of plastic that you will require to assist you in grasping the bulb in the bulb in a secure grasp. Then, it’s just a simple pull and twist operation.
To learn all you can regarding changing the Singer sewing machine’s light bulb, keep reading our article. It’s only going to take just a few minutes to read, and within this time, you’ll be able to change the light bulb in the Singer sewing machine.
Singer Sewing Machine Bulb Change Tips
The first thing you must be aware of is Singer lights, in the vast majority of parts, do not have screw-in type bulbs. This is a common error that is made by those who don’t have any experience in changing the light bulb on a sewing machine.
The other thing you have to know about replacing the Singer bulb is that they’re not all of the same sizes. A particular size is not suitable for the entire machine. Thirdly, do not replace the bulbs with your fingers. bulbs. They are not only able to break easily, but the oil on your fingers could cause the new bulb to be susceptible to being damaged.
Fourth It is possible to switch from a lighting bulb that was incandescent to a long-time lighting bulb for sewing machines that is LED. All you need to do is go through an appropriate chart to identify the suitable LED replacement bulb and then use it.
Fifth, if the area is tiny, be careful not to use your hands. Place a piece of plastic tubing or a soft, but sturdy long-handle tool on top of the light bulb and then push and turn. Sixth, do not forget to unplug your sewing machine off the electrical source. The possibility of shocks is high if you’re not cautious.
Seventh The process of loosening the light assembly will allow the user more room and also make it safer for you. If you’re removing bulbs from an old machine, and the light bulb was sat inside the machine for a long time Be cautious. The bulb will be soft, fragile, and trapped. Be cautious and follow all safety precautions applicable.
Singer Sewing Machine Light Bulb Type
It is believed that the Singer sewing machine maker has produced a range of models for sewing machines over the decades. The machines come in several different designs to let the user sew their clothing.
One thing, however, doesn’t seem to alter all that significantly. Although Singer offers one screw-in incandescent light bulb available the majority of their light bulbs are push-and-turn type. This means that the lamp’s base is equipped with two small knobs that keep the light bulb.
You must push these light bulbs to move them over the guide made of metal and then to the right to ensure that the knobs are in the proper position. After that then let go of tension and the bulbs will bounce into position.
One thing know is it is made for a particular Singer model sewing machine. It is not an assurance that the bulb will work with all sewing machines of that series. A good example can be the bulb designed specifically for the 14SH654 series. 14SH654 series.
This light bulb will not work with other sewing machines from the SH series. You must check each bulb to determine the appropriate one that is compatible.
Singer Featherweight Sewing Machine Bulb
The type of light bulb that is used inside the Singer featherweight sewing machine is the basic design of a turn and push. If you own this model, you’re likely to know that it can be difficult to enter this light bulb assembly and then remove the bulb that was previously installed.
There’s a small trick to this technique, and it requires a great box cutter (or similar) knife and an aluminum tube. To get the most efficient access you must rotate the sewing machine towards its handwheel. This allows you to be able to see what you’re doing more clearly than in other positions.
To ensure your fingers are safe, for your fingers, make use of a 3/4 inch inside diameter plastic tube around 3 to 4 inches long. Once you’ve got the tube cut to the proper size then use your knife to cut slits of about 1/4-1/2 inches on the other end.
The slits help make it easier for the tube’s expansion and then slide onto the light bulb that is glass. After placing the tube in place over the light bulb, squeeze the tube until it is pushed down. Turn counterclockwise and move the knobs back into the removal position.
While holding the tube to it, take the bulb away. Once that phase of the exchange is completed put the tube in place over the new bulb and reverse the procedure. Turn the machine up, and you’re finished.
Singer Futura Sewing Machine Bulb
There are plenty of positive aspects to the Singer sewing machine. The first is that you can use the twist and push type of bulbs. It will make changing bulbs easy and simple to complete.
In addition, you can purchase an LED-compatible light bulb, so you will not need to perform this change anytime in the near future. The downside is that there are lots of various Futura sewing machines that are part of this line.
For this part, we’ve used the instruction manual of the XL 400 to explain how to switch your lightbulb. To take out the light bulb that was previously in use you must move the lamp bracket down. There’s a button you pull and your forefinger and thumb should suffice.
After the light bracket has been lower, just turn and push the light bulb, and it should come out. Be careful not to try unscrewing it. If you want to put an additional bulb in, simply reverse the procedure. Once you’re done you can pull the light bracket up until it snaps to its original position. When you hear the click, you are able to begin sewing once more.
If you’d like to have access to the owner’s manuals of all the models of the Futura series, click here. Click here. For all other models, you’ll have to type your serial number into the search box and then press the button. just click here to go to this link to go to the correct page.
Old Singer Sewing Machine Light Bulb
As we mentioned previously, the older Singer sewing machines might include light bulbs that were originally installed when Thomas Edison was still alive. This means you have to be extra cautious when removing the bulb.
The glass will be extremely fragile and could break easily. Many users have had their fingers cut because they did not use protection tools to aid them. It is the first thing to ensure that you disconnect your device. The second type of injury that happens frequently is a minor electric shock if people fail to do this step.
It is possible that you will need to loosen the light fixture so that you have better access to the bulb. If the light bulb isn’t stuck after having been in the fixture for so long You may be able to slowly turn it and take it off.
A few, if not all older Singer’s utilize the screw in versions (series 99 and 185, and the older versions). If it isn’t turning then you must turn and push simultaneously. The next step is to make use of the cloth, plastic tool, or whatever you prefer and secure it to the glass. Remove the bulb.
It’s all there is to it.
Sewing Machine Bulb Keeps Blowing
One of the most common reasons why lights for sewing machines explode often is due to the fact that sewing machine manufacturers contract their manufacturing to other countries with less high-quality standards.
What this means is that sewing machine bulbs are constructed from inferior components and will not last for long. Another reason that reduces the lifespan of the bulb is that it isn’t positioned tight enough within the socket. Consequently, an arc develops blowing out it into the socket.
To fix the issue check the connection and ensure that it is secure.
Some Final Words
It might be a minor thing on your sewing machine, but once the lamp stops working and you see the change. Being aware of how to fix the issue can save you time and cash.
Remember that there are many different sewing machines that are created equal and they do not all use the same kind of light bulb. One method to speed up the process of exchange is to change your lightbulb to an LED version.
These bulbs are expected to last for thousands of years and could simplify your sewing life just a tiny bit.