How To Clean your Samsung Washing Machine?

Are you looking for advice on how to clean a Samsung washer, but you don’t know where to begin? Don’t worry; this guide will walk you through the process of cleaning your Samsung top or front-load washer.

When it comes to cleaning a washing machine, it’s vital to do so as frequently as you wash your clothes. However, we tend to overlook the need of cleaning our washers. Maintaining the appliances is essential to their long-term viability. Because of its built-in cleaning mechanism, you won’t have any difficulty cleaning your Samsung washer. You’d be wise to read on for more information.

Guide on How To Clean your Samsung Washing Machine

Step 1: Thoroughly clean the seal

Decontaminating a washing machine begins with checking the door seal.

All kinds of pocket junk are captured by the seal: lint, coins, paperclips, etc.

Unless you clear it out periodically, the junk can mildew or worse, make its way down to the trap if it isn’t cleaned out.

To remove any foreign matter, simply swipe your palm around the seal.

Wipe it down once again with a moist towel.

Step 2: Empty and clean the trap

A place inside the washer known as “the trap” is where objects go when they are not caught by the washing door seal. As an alternative to a filter, it is called a pre-filter.

Unless you remove the objects or the washer stops draining water from the tub, they will continue to rot and mildew.

Samsung Smart Tv [2022]: Where is the camera? (Answered)

A trap only became apparent after my washer stopped draining water completely.

My husband expertly removed our washer, revealing a trap full of Legos and roughly $5 in change. I was amazed.

Instructions for cleaning your trap are provided in the following paragraphs.

The first step is to unplug the washer from the wall.

The front or back of the washing machine should have a little door.

In order to catch any drippings, place a small bowl at the little door.

Pry the door open from the inside using a flathead screwdriver or a coin.

A black tube with an alphanumeric code will be on display inside the door. With care, remove the plastic cover from the hose’s top end and pull the hose upwards to free it.

After draining the hose, place it in a bowl.

Use a towel to create a barrier in front of the door.

There will be a black hose adjacent to the trap cap, or filter cap. Once you’ve turned it to the left, pull it forward to finish the motion.

After properly cleaning the trap and hose, it is time to replace them.

Close the tiny door when you’re finished.

The following instructions may vary depending on the model and year of your washer. Consult your washer’s owner’s manual for precise instructions before attempting to clean the trap.

Step 3: Instructions for Self-Cleaning (With Bleach)

This is my number one recommendation for getting rid of foul odors. It is effective every time.

Using a detergent container filled to the top with liquid chlorine bleach, start the Self Clean cycle and wait until it finishes before checking to see if the problem has been remedied.

Your local service center should be contacted if the problem persists.

Follow these straightforward guidelines:

Your computer needs to be turned on.

Using a liquid bleach, fill the detergent container in your washing machine until it reaches the maximum fill line.

Self-Cleaning Mechanism Activation

For the cycle to complete, wait an hour (or four hours if you have a front-load machine)

Washing machine tubs should be cleaned from the inside out.

Rinse and spin your washing machine to get rid of any soap residue.

Remove the lid and detergent container from the appliance and allow it to air dry.

The pump’s filter should be emptied and cleaned on a regular basis (front load models only)

Contact customer support if your unit still isn’t running at full capacity.

Our Team Tips and Tricks in Cleaning your Washing Machine

How to Clean the Filter on the Washer Pump

A front-load washer’s pump filter removes dirt to keep the drainage system clear.

Samsung front-load washers often produce an unpleasant scent, and cleaning the filter is one way to get rid of it.

In the front, right corner of the washer, you’ll find a little access panel that allows you to remove the pump filter. The panel can be accessed by pressing the cover down all the way.

How to Set up Voicemail on the Samsung S20 [2022] is highly recommended. (Step-by-Step)

A towel and a shallow drain pain placed beneath the drain hose will keep it unclogged.

As soon as you’ve removed the hose cap by twisting it off, allow any residual water to drain.

The pump filter can be removed by turning it counterclockwise.

Using a toothbrush and some warm water, gently remove any dirt from the filter.

Twist the filter in the clockwise direction to reinstall it.

Replace the drain hose cap and close the access panel.

How to Clean the Gasket on a Front-Load Washer

A front-loading washer’s rubber door gasket forms a seal to prevent leaks.

As a result, if your washing machine is smelling mildewy, the gasket can also function as a catchall for any dirt that has been accumulating. Here’s a quick and easy gasket cleaning technique:

As a first step, peel aside the gasket on your washing machine’s door to expose the interior.

Make sure there are no paper clips, nails or coins exposed.

Using a damp cloth, wipe away any visible dust or hair.

Spray the gasket with warm, soapy water or mildew solution of your choice to get rid of the mold. Wipe the surface with a clean cloth.

5. Use a toothbrush dipped in a 10% bleach solution to remove persistent mildew spots.

How to Maintain Your Samsung Washing Machine

Based on how often they should be completed, Samsung categorizes various types of maintenance tasks. On a monthly basis, some tasks are completed, while others are performed on a regular basis.

Maintenance Requirements on a Regular Basis

Samsung suggests the following routine (regular) maintenance practices.

• Cleaning the building’s exterior is a must.
• Blemishes on the outside of your washing machine are common.
• They may usually be removed with a moist cloth and a mild detergent.

Samsung suggests the following methods if you’re having problems eliminating blemishes:

Determine which cooktop cleaner to use.

Apply the product to the skin using a damp microfiber cloth.

When the residue is lifted from the skin, gently rub the affected area in a circular motion to remove it from the surface of the skin.

A damp microfiber cloth should be used to remove the residual cleaning product.

Dry the afflicted area with a dry microfiber towel.

In between cycles, leave the Detergent Drawer and the Door open.

Customers should leave the detergent drawer and main door slightly ajar between cycles, as recommended by Samsung.

Adding chlorine bleach to the detergent compartment before re-running the machine is an option if mold has already formed in the machine after a typical spin cycle (without washing).

Run a Hot-Water-Only cycle every now and then.

A hot water cycle without detergent might keep your washing machine smelling fresh and clean if you generally use cold water.

Samsung Refrigerator Warranty: The #1 Information and Guide

This option makes it easier to get rid of dirt and detergent buildup.

Maintenance tasks to be completed on a monthly basis

To keep the machine running at its best, Samsung provides a detailed list of monthly maintenance duties.

When Should You Use Self-Clean? How Often Should You Use Self-Clean?

Regular cleaning and maintenance of your Samsung washing machine is almost certainly part of your daily routine if you own one.

As a result, you can use the factory-installed self-clean option to keep your machine as clean as possible in accordance with the manufacturer’s instructions.

Your machine has been designed with the Self Clean feature in mind if you don’t already have a regular cleaning and maintenance program in place.

For maximum efficiency and lowest effort, you can keep the washing machine drum and other internal components as clean as possible. As a result, your appliance will last longer if you take care of it like this.

When and how often should you use the Samsung washing machine’s Self Clean cycle?

Samsung suggests that you utilize the Self Clean feature once a month to get the most out of it.

The only people who can benefit from this are those who only use their computers every other day or less.

It’s best to use Self Clean after a certain number of loads if you wash your clothes frequently.

If you don’t already have a Self-Clean, you should get one.

How To Clean A Front-Load Samsung Washer

After every 40 washes, your Samsung front-load washer needs to be cleaned, and the self-cleaning process normally takes four hours to finish. It is possible to use the same cleaning approach for all the sections of a Samsung front-load washer, except for the drain pump filter, which requires a different cleaning procedure. To learn more about Samsung washing machines, visit this website.

Method To Clean Drain Pump Filter

Locate the lowest left-hand side of the washer and open the little door. It’s easy to open with a pointed object or a key. After that, deploy the rescue drain hose. Drain the water from its cap into a clean bowl by unscrewing the top of it. Put the hose back in place and secure the lid. Turn the drain pump/debris filter counterclockwise to access it now. To clear out the gunk, you’ll have to take the filter out of the housing. Close the door after reinstalling the filter and turning it clockwise. Voila! The end.

Maintenance Of The Washer

Following a few safety steps and precautions can help extend the life of your washer. These are the components:

1. Six to seven times a year, clean the debris/drain pump filter.
2. Once or twice a year, you should clean the mesh tray.
3. Before washing, make sure there aren’t any large or difficult-to-remove items in the pockets.
4. Don’t leave the clothing in the washing machine for too long once the cycle is complete.
5. Open the washer’s lid to avoid inhaling the noxious fumes.
6. Don’t overlook the light on the control panel indicating self-cleaning.
7. After you’ve finished washing the clothes, don’t forget to unplug the switch.
8. In some Samsung washing machines, there is no need for detergent.

Self-Clean Function

You can simply clean the drum of most Samsung washers without using chemicals or contacting a specialist thanks to the self-clean feature. This feature, known as Pure Cycle or Self Clean+, precisely targets mold and regions of the tub where moisture and detergent residue tend to build up. Top-loading washers take around an hour and front-loading washers take about four hours to do the self-cleaning cycle. When a self-cleaning option isn’t available on your washer, Samsung suggests using a washing machine cleaning product or bleach.

Why Use the Self-Clean Function?

The self-clean function is designed to clean Samsung washers in accordance with the manufacturer’s instructions. Use of cleaning solutions or DIY maintenance that could harm the washer is avoided by using the self-clean mode. Additionally, the self-cleaning function utilizes only the quantity of water necessary to ensure that you stay within the manufacturer’s warranty restrictions. As a bonus, you don’t have to get your hands dirty or spend a lot of time cleaning the machine.

How Often Should You Run the Self-Clean Cycle?

When the washer needs to run a self-clean cycle, a light on the Samsung appliance flashes. After 20 loads, the indicator light will come on. The light will continue to blink for five more loads if you do not pay attention to it. After another 20 loads, the light will flash to remind you to run a self-clean cycle.

For top-loading washers, Samsung suggests using the self-clean function every 20 loads; for front-loading washers, run it every 40 loads if you don’t have a self-clean light.

How to Use the Self-Clean Function

The self-clean cycle does not require any cleaner to be applied if bleach is not being used (explained below). The self-clean cycle should be run again if you observe suds or residue in the washer tub during the process.

To perform a self-cleaning cycle, follow these instructions:

1. Washer must be plugged in, but must be empty.
2. Activate the Power button.
3. Press the Self-Clean button.
4. Press the start button.

It’s possible to do a regular load of laundry after the self-cleaning cycle has finished (1 hour for top-loaders, 4 hours for front-loaders).

Cleaning with Bleach

A self-cleaning cycle with bleach is recommended if you notice an unpleasant odor or see visible mold or mildew on your washer, as per Samsung’s instructions.

Bleach can be used to clean the washer.

1. Make sure the washer is completely emptied and running.
2. Activate the Power button.
3. Washer’s Detergent Container (not Bleach Container) Fill to the Max Fill Line with Liquid Bleach.
4. Press the Self-Clean button.
5. Wait for the self-cleaning cycle to complete before using the washer (1 hour for top-loaders, 4 hours for front-loaders).
6. Clean the tub of the washing machine.
7. Rinse and spin your clothes.
8. Allow the detergent container and its lid to air dry completely.

The pump filter on your front-loading washer should also be cleaned if you have one.

Clean the Washer’s Pump Filter (Front-Loader Washers)

There are usually pump filters or debris filters on the front of Samsung washers to keep lint and other debris out of the washer’s drain system. The pump filter should be cleaned at least once a month or after 40 loads of washing, whichever comes first. You can prevent odors, mold and mildew by keeping the pump filter clean. This will guarantee the washer drains properly.

When it comes to pump cleaning:

1. By pressing on the cover, the pump filter access panel will pop open.
2. Locate the black rubber line that drains out of the kitchen sink.
3. Drain the water from the hose by unscrewing the white drain plug and pouring it into a big container. Expect some water to splash about. It may take some effort to remove the plug because it forms an airtight seal. Remove the plug by twisting it while holding the hose.
4. In some models, the pump filter can be removed by twisting the filter counterclockwise and removing it, or by pressing it in and spinning it like a medication bottle.
5. Using soap and water, wash the filter. Use a soft bristle brush or a small toothbrush to remove dirt and debris from the surface.
6. Return the filter to the washer and start the cycle over again.
7. Reattach the hose to the mounting clip and replace the hose plug.
8. The access panel is now closed.

Clean the Detergent Drawer

Detergent residue can build up in the washer’s detergent drawer over time, affecting the machine’s capacity to clean effectively. Keeping the detergent drawer clean is recommended by Samsung in order to avoid poor cleaning and to avoid drainage and leaking issues in the future, as well.

This is how to clean the detergent drawer:

1. It’s time to remove that detergent drawer. You may take out the drawer from a front-loading washer by pressing on the ends of the drawer on each side. Removing the drawer is easy with top-loading washers. Simply pull the drawer out, then tip it upwards.
2. Using a sponge or scrub brush, scrape and rinse the detergent drawer until the residue is gone.
3. The drawer should now be placed in the washer.

Routine Cleaning

Samsung recommends the following steps to keep the washer running at its best:

• If you normally wash in cold water, run a cycle with warm or hot water from time to time to prevent buildup of detergent or grime.
• To avoid the growth of mold or mildew, leave the washer’s lid or door open and the detergent drawer unlocked.
• With a little detergent and a moist cloth, you may clean the door of your washing machine. Cerma Bryte cooktop cleanser can be used if the problem persists.

A maintenance video for Samsung washers is available on Samsung’s website.

What if the Self-Clean Function Doesn’t Work?

Try running the self-clean cycle again, adding bleach to the self-clean cycle, and running a rinse and spin cycle after the self-clean cycle if it doesn’t seem to be operating properly. Self-cleaning may be malfunctioning, and Samsung support will need to be contacted and a specialist sent out to inspect the machine.

FAQs

Why does my Samsung washer stink?

Mold and mildew can quickly grow on these residual particles in the washer’s warm, wet environment, generating an unpleasant odor as they multiply. It’s easy to forget to clean the internal walls, gasket, and filter of your Samsung front-load washer when it’s stinky and dirty.

How do I clean my self cleaning washing machine?

To thoroughly clean the interior, use a Self-Cleaning or Pure Cycle.

1. Press Self Clean, then Start after the washer is empty to begin a Self Clean cycle.
2. When using self-clean, there’s no need to use any cleaner. However, if you already have a moldy scent, we recommend using bleach (see our guide for details).

How often should you self clean a Samsung washer?

If you want to keep mold and mildew at bay, run the Samsung Self Clean setting once a month. With greater use, the Self-Clean indication will light up sooner. The Self-Clean indicator light will come on in front-loading machines after 40 washes.

Does Samsung top load washer have a filter?

In order to ensure a clean wash, Samsung’s top load washers contain a simple to clean debris filter that avoids clogs.

How do I deep clean my top loading washing machine?

Pour one litre of chlorine bleach into the washing and let it agitate for one minute. After that, let it sit for an hour so that it may absorb the flavor. Finally, without adding any detergent, run the longest cycle possible on your washing machine. I’ll try it again!

Can you put vinegar in Samsung washer?

The use of distilled white vinegar as a cleaning agent for your washing machine has been widely promoted, but Samsung advises against this practice because it can harm the machine and its components.

Can vinegar damage your washing machine?

Vinegar can be used as a fabric softener or to remove stains and odors from laundry, depending on the application. However, similar to dishwashers, certain washing machines may experience leaks as a result of damaging the rubber seals and hoses.

What is the sanitize cycle on Samsung washer?

Stain remover: Use on badly dirty, colorfast clothing. To get rid of microorganisms, this cycle raises the temperature of the water to 150 degrees Fahrenheit. Removes water by spinning it out of the way. This can also be used to add extra spinning to another cycle.

It’s A Wrap!

Having learnt how to clean a Samsung washer, you can now effortlessly maintain your appliance by following the procedures outlined here. Keep in mind, however, that a machine’s efficiency is directly correlated to the level of care it receives. Samsung’s self-cleaning technology makes it simple to maintain your machine so that you can enjoy it for many years to come. You may also be interested in learning what DC stands for on a Samsung washing machine.