Updated at: 17-05-2022 - By: Helen Skeates

How do you remove a washer from its hose? Simple three-step process which you should be able to do in no time at all.

While organizing your home, appliances and other items are typically relocated to guarantee that everything goes as planned and looks clean at all. However, this situation is unique. A washer is a fixed thing, therefore you can’t just take it apart and put it somewhere else.

You can generally find it in a single location, so you may put your washer in the basement, outside, a separate room, or any of a number of other locations. There is no need to move the equipment, thus it will remain there for years, months, or even weeks. Is it possible to relocate it? You begin by asking yourself, “How do I unplug a washing machine?” To finish it, you’ll need to follow a variety of steps, so be sure to go over them all carefully before moving on. It will take some time, but I can assure you that the time you save by disconnecting will be well worth it.

Steps To Disconnect A Washer

How do you remove a washer from its hose? It will take a long time, but it will be easier for you to complete if you do it this way. As a starting point for unplugging everything from the washer, these are the steps we’ve laid down for you:

How to move your washing machine when moving flat

Always Start by Unplugging the Washer

Disconnecting the washer is always the first step in any repair or maintenance work. As a precaution, you don’t want to short out the machine, start it by accident, or electrocute yourself while working on the parts In the event of a washing machine leak or water spray, you don’t want to have an active electrical connection in place.

– Remove the Plug

To begin, remove the wall plug. The metal prongs of the plug can be dangerous, even if the plug is firmly in place and difficult to remove. The plug can be removed from the wall by wriggling it if necessary.

– Hang the Plug End

Remove the plug and secure it with a twist tie or clamp after you’ve removed it. That way, you won’t have to worry about the plug end being wet while you’re working on it.

Shut Off the Water

Reduce the risk of a mess or water damage to electronic components by following these instructions. Turn off the water supply to your washing machine to accomplish this. There are three possible approaches to this. Disconnecting water to the hookups, sealing the hookups, or turning off your main water supply are all options.

– To the Washer

An exposed valve in certain households prevents the pipes from reaching specified valves by shutting off the washing machine connections. Like the rear or beneath the sink valve of your toilet. A simple way to stop the flow of water to your washer while having repairs done is if you have one of these.

– At the Valves

There are a few ways to turn off the washer’s water supply if you don’t have a single simple shut-off valve. They may not turn at all if you use the same washer connection for an extended period of time.

– From the Main

If all else fails, you can cut off the water to your entire house at the water main, just as you would if you needed to make substantial repairs to the plumbing in your kitchen or bathroom.

Give Yourself Some Room

Once you’ve done that, allow yourself some breathing room. The best method to see what you’re doing is to pull your washer away from the wall and stand behind it or bend over it. You may have to remove the dryer first in some facilities. Remember to follow the same safety procedures if you move the dryer.

Remove and Empty the Drain Line

It’s time to remove the drain line once you’ve cleared some space. In order for your washer to drain properly, a hose or pipe like this must be used.

– Locate the Drain Line

An unattached U-shaped hose that either screws into or is loosely linked to a drain pipe in the home’s washer connections is the most common drain for a washing machine. You must locate this hose and its method of removal. Most of the time, all you have to do is lift it out of an open, upright PVC tube.

– Lay a Bucket on the Ground Behind Your Washer

Place a bucket under your washing machine before you disconnect the drain line to catch any water that leaks out. When you remove and drop the drain line, it may not be entirely empty and spat out any retained water. Make sure you don’t make a mess by keeping the bucket nearby.

– Pull the Drain Line & Set in the Bucket

The drain line should be dragged out and thrown into a pail. In order to empty the bucket as completely as possible, wring out the line and try to straighten it over the bucket as you shake it. When moving the machine, you may want to clip the end of the drain line to itself so that it doesn’t drag.

How to Disconnect a Washing Machine - YouTube

Disconnect the Supply Lines

Next, we have the supply lines to deal with. The valves in the wall are connected to these hot and cold water hookups. Because of rust and sediment buildup over time, they can be particularly difficult for you to dislodge before you remove the washing machine.

– Locate the Water Supply Lines

Two metal hoses, presumably, link to two wall valves, and form the water supply system. You’ll need to unhook them from the power source.

– Close the Valves

Close these valves if you haven’t already. Prepare to use pliers and a lot of force if they’re rusty and stuck in the open position. Turn off the water at a more distant location and prepare for a little mess if they won’t close.

– Loosen the Connections

Each supply line hose must be disconnected from its valve with a wrench or pliers. Force and a little loosening agent like CLR or professional plumbing solution may be required for this procedure as well.

– Drain Into Bucket

When you’ve finished clearing out the hoses and have a bucket handy, drain the contents of the bucket as well.

– Clear of Obstructions

In the end, inspect your supply line and valve connections for any damage or wear. Is corrosion or scale obstructing the openings? Use a wire brush and cleaning solution if necessary to remove any clogs.

Remove Your Washing Machine

Now that you’ve disconnected everything from your washing machine, it’s time to remove it.

– Pull Out for Repair Work

This is the best moment to turn the washer toward you or make extra area to work around and behind it if you want to fix it while it is completely disconnected from the wall.

– Load onto Dolly for Removal

In order to remove or transfer your washing machine, we recommend loading it solely on a rolling dolly that will allow you to carry the heavy equipment without hurting your back or damaging the floor. Keep an eye out for any snags in the wires. Clips can keep the power wire and hoses off the floor by looping them together.

—Of course, disconnecting the washing machine is just the first step in many repair methods. Contact us if you have any questions about washing machine repair or if you need help deciding what kind of repair services your machine needs.

How to Connect a Clothes Washer After a Move

  • The process of re-connecting the washer is straightforward if you were careful when you disconnected it.
  • Pull the hoses from the washer tub after removing the duct tape that was holding them in place.
  • Be sure to leave adequate space behind the washer so that you can work on the hose connections.
  • Look for signs of wear and abrasion on your washer’s fill hoses, as well as rust on the connectors. Replace them if they’ve been around for more than three years. It is advisable to use a stainless steel fill line as a safety net in case of a ruptured hose. Make that the rubber washers in the connectors are in place.
  • Determine whether or not the washer hoses will fit in your new position. When this isn’t possible, you can either get an extender or buy new hoses that are longer.
  • To fill up the washer, use either your hands or a pair of pipe pliers to connect it to the water inlets on the back of the machine. Overtightening might damage the rubber washer, causing leaks, thus be careful not to do so.
  • Keep the hoses free of knots and make sure that the correct lines are connected to the hot and cold water outputs before connecting them to the wall water lines. Check for water leaks by turning on the water valves. You can use a paper towel or your hands to check for leaks by running them down the hoses.
  • Make sure the drain line is properly connected to the washer again if you detached it during the relocation. Connect the hose from the washer to the drain pipe in the wall. You should double-check to make sure the wall pipe is standing straight and to make sure the sewer drain hose is not being pushed too far down the pipe. The end of the drain line on most new washers has a plastic hook into which the drain hose may be clipped. As a result, you won’t be able to push it in any further. You’ve pushed the drain hose too far if the washer keeps filling and emptying itself.
  • You can extend the drain hose with an unique connector and additional hose if the new position requires it.
  • Make that the hoses and drains are not kinked or compressed when you slide the washer into position.
  • Make sure the washer is level before you begin. You can use a level (a smartphone app may have one) and adjust the feet under the washer to remedy the problem. To eliminate vibrations and prevent leaks, it is best to level the washer. You can use wood shims or hefty cardboard if your washer doesn’t have adjustable feet.
  • Plug in the washer’s power cord and see if it works. A few loads of laundry are necessary to ensure that there are no leaks.

How to Install a Washing Machine

Installing a washing machine is a breeze thanks to pre-existing hookups in the home. Moving the hefty washing machine into place is the most difficult element of the entire process. Many appliance stores will include free installation and removal of your old washing machine when you buy a new one and have it delivered. With a dolly and a friend at your side, you’ll be able to move it into place much more quickly and easily.

Before You Begin

To calculate the length of the washing machine hoses, measure the area where the appliance will be installed. Buying longer hoses is preferable to attempting to squeeze in shorter hoses. Washing machine hoses come in many shapes and sizes, so shop around to find the right one for your needs.

Check to see if the washing machine will be close enough to the water, drain, and power lines before beginning the installation. There should be 3 to 4 inches of clearance between the machine and the wall once it is installed.

What You’ll Need

Equipment / Tools

  • Instrument for measuring length and width
  • Pliers
  • Dolly (for moving the washer)


  • Dolly’s (for moving the washer)
  • Dolly is the name of the game (for moving the washer)
  • Clamp for hose (if needed)
  • Tape (if needed)


Place the Machine

Position the washing machine so that the drain, hose, and power outlets are all as close to the wall as possible with the aid of a dolly or a strong assistance. Just enough room is needed so that you can get your task done.

Connect the Water Hoses

Washing machine hoses are connected to the water exits behind the washer. The machine’s outlets are labeled as “hot” and “cold,” respectively. Keeping track of the hoses will ensure that you remember which hot and cold valves to connect them to. To make things even simpler, some hoses are available in blue and red. You can use a piece of tape with the word “HOT” written on it to assist you remember which hose is hot.

It’s possible to install the washing machine in a small space by connecting hot and cold water lines to the machine and then putting it in place before completing the installation process with hoses and valves. Use pliers to tighten the connections a little more than hand-tight, and be careful not to overtighten them.


It is always a good idea to install new washing machine hoses when installing a new washing machine. Although they may appear to be in good condition, they will eventually wear out and break down. Investing in new hoses can assist ensure that your system is as leak-proof as possible.

Hook Up the Drain Line

A hose clamp may be required to connect the drain to the machine’s backside, depending on the model. Drain connections can be pre-installed in some cases. Simply insert the drain line into the drain line standpipe and you’ll be ready to go.


Barbed ends or a sharp hook form may be used on the drain line to ensure that it does not easily come out of the standpipe.

Plug In and Test the Machine

Before putting the washer in place, make sure the power cord is plugged in. It’s time to turn on the water. Start a test load to see if the washer is performing as it is supposed to.

The water lines at all four connections should be checked for symptoms of a leak before you begin the test load. Allow the machine to run its course so that you can monitor the draining of the water. An early inspection of the machine can prevent a flood or an undetected leak that you may not notice until it’s too late.

How to disconnect a washing machine | Living by HomeServe

Troubleshooting Your Washing Machine

On your initial test run, you may notice some problems. So, here’s how it’s done:

If the washing machine won’t drain or water pours out of the drain standpipe, there may be a blockage in the machine’s drainage system. Even if the washing machine drain is only half clogged, use a drain snake to clear it.

There may be a simple fix for leaking washing machine valves: Tightening the packing may be all it takes (the nut just below the handle). Valves may need replacing if this does not stop the leak.

You’ll need to level the machine if it’s unstable, because big loads can cause it to leap or rock. If the machine isn’t level, you can adjust it by adjusting the machine’s front feet, and the back feet will automatically adjust to match.


Is it easy to disconnect a washing machine?

Fortunately, disconnecting your washing machine is a fairly straightforward process, so you’ll only need a few items to get started. So that you’re prepared when the time comes, here is a short list of the essentials. You’ll have to: Socket wrench (if you need to remove a worktop for an integrated machine)

How do I temporarily turn off my washing machine?

Make sure that the washing machine dial on the front of your machine has been shifted to the “0” or “OFF” position. As soon as any water is drained from the washing drum, you can proceed to make any necessary adjustments or remove objects from the washing machine.

How long can a washing machine sit unused?

Depending on how properly it is stored, a washer that starts working can stay unused for months or even years. if it isn’t stored properly, it can corrode or suffer irreversible harm if it’s kept for a long period.

Should you unplug your washing machine?

Predicated on the fact that unplugged electrical equipment cannot spark fires or shock people, the US Consumer Product Safety Commission suggests disconnecting gadgets while they are not in use.

How do you secure a washer drum for moving?

Your washing machine’s suspension will be protected from breaking by preventing its drum from moving excessively during your transport. Shipping bolts or transit bolts can be used to secure the drum. The drum is held in place by these metal rods that are placed into special grooves in the back of the washer.

Can washing machine be locked?

After a few minutes, you should be able to open the washing machine door after turning off the machine at the mains. Be patient since the interlocks may take a while to disengage at the end of the cycle. Leaving water in the machine is the most prevalent cause.

How do you force a washing machine to unlock?

You can try turning the computer off if pausing it doesn’t work. Wait 5-10 minutes after unplugging the machine. See whether the door will open by pulling on the handle once more. For top loaders, this is the most typical solution.

Can one person move a washing machine?

It is feasible to transport a washing machine on your own without the assistance of professional movers. However, you will still need at least two other people to help you do the task safely.

It’s A Wrap!

It’s never been easier to learn how to unplug a washing machine! Now that you’ve learned how to accomplish it, put it to the test immediately. If you don’t know how to move the machine, you may also wish to learn how to do so. For those of you who enjoy reading about washers, we’ve got some terrific recommendations. It is possible to learn more about it and to read it if you so desire. This can help you figure just how much space a large capacity washer has. Be aware of washing machine purchasing advice as well.