How to Fix a Warped Tupperware Lid? Troubleshooting and Repair Guide

16 min read

Since the dawn of time, Tupperware has been a household name. There is a good chance that you are related to a Tupperware product owner or seller. Unfortunately, the plastic used by this company is not perfect. It has problems of its own that are due to human error.

Since the dawn of time, Tupperware has been a household name. There is a good chance that you are related to a Tupperware product owner or seller. Unfortunately, this company’s plastic isn’t up to snuff. It has problems of its own that are due to human error.

Everybody knows Tupperware. You’re probably related to someone who has used or sold Tupperware. Unfortunately, this company’s plastic isn’t quite up to par. Simple human error has resulted in a number of its own problems.

Can You Fix a Warped Tupperware Lid?

In this case, the answer is either “yes” or “no.” There are both positive and negative examples. The outcome will be greatly influenced by the degree of warpage in the Tupperware lid. Some warps are so tight that it’s difficult to escape.

Many Tupperware plastics aren’t dishwasher-safe due to the dishwasher’s intense heat. Many of the older lids aren’t, however. There is a good chance that warping will occur when you put the lids in the dishwasher.

Some fixes can be done, and such fixes are dependent on the temperature. When it comes to reshaping plastic, this is the only thing that works. If you overuse the heat, the lid may not be covered by Tupperware’s lifetime warranty, which is why it’s important to keep a close eye on it.

How to fix a Warped Tupperware Lid



As previously mentioned, the use of heat is essential in the process of repairing a warp. The plastic cover was deformed in the first place because of the heat, and the only way to restore it is to heat it back up. This is a one-time use of fire to put out a blaze.

Put the lid on your microwave and turn it on as an option. When it comes to determining the proper amount of heat, it will be a trial and error process.

In addition, there is a time limit. To avoid additional deterioration, you should not leave the cover in the oven for too long. Place a hefty flat object on top of the lid to restore it back to its normal size for a few minutes at a time.

For a last option, you may place the lid in boiling water for a short period of time, and then either let the lid rest on its own or put a small weight on it so that the plastic can return to its natural shape.

The most important thing is to use extreme caution and not lose sight of the fact that the lid is extremely hot. Having been underweight for a long period of time will not pose a threat.

Tupperware Lid Won’t Close

With older Tupperware lids, this is a regular issue. You’re not alone; it occurs to everyone. Disinfect the lid by running it through the dishwasher for a cycle.

Then, while still hot, place the lid back on the bowl and let the lid cool. When the lid cools, it will restructure and still be able to grip the bowl lip.

A microwave and a saucepan of boiling water can be used to warm up the lid and then return it to its basin to cool. In all three scenarios, the length of time will be the most important factor.

There is always a risk of melting or deforming the plastic if it is exposed to excessive heat for an extended period of time. Microwaves, on the other hand, heat from the inside out, therefore you must be careful not to damage the lid.

Tupperware Lid Too Loose



Plastic is difficult to shrink to the point where it will create a perfect fit and maintain the freshness of the food inside. In most circumstances, you can attempt the ways we’ve already discussed to see if they can help you tighten the lid.

Contact Tupperware to determine if the lid is covered by their limited lifetime warranty in this circumstance. Please click here for information on how to replace your lid on their website.

Because decreasing a lid is not being discussed, there is no other method to report a solution than by contacting the firm directly. Plastic shrinking, especially when it comes to keeping food fresh, necessitates a fair distribution of the shrinking process.

You won’t get the seal you need if one part doesn’t shrink. It’s not just the shape or the fit that you’re looking for, but the tight seal that has to be done as well when it comes to Tupperware plastic and any other plastic.

Tupperware Lid Doesn’t Fit

When a lid is too loose, it may just need to be put on a bigger bowl. As a last resort, if the lid doesn’t fit, you can try the methods we’ve already outlined and see if you can get it to fit.

The procedure that involves heating the lid in boiling water for about 15 minutes before placing it over the bowl it belongs to is the most effective.

The seal and the material should reshape themselves to fit perfectly when the lid cools. It should be noted that this is not a foolproof procedure. It all depends on what you’re using plastic for because it’s not the most long-lasting material around.

Trying to bring plastic back to its normal shape can be a real pain. To check if the lid will return to its original shape, you can use the boiling water method or the microwave option numerous times, but be careful as it is possible to overheat the plastic.

Broken Tupperware Lid



There is a way to restore cracked plastic lids before you toss them out, even if Tupperware won’t replace them under its lifetime promise. Only a few minutes and a special tool are required.

Soldering damaged plastic back together is possible. Soldering isn’t just for electronics and light metal items; it may be used for a wide range of applications. Use your soldering iron to repair cracked plastic parts.

Fortunately, you don’t have to limit yourself to Tupperware lids. Welding shattered plastic pieces together is a common method of repair. To get started, follow these steps:

  • 1. Warm up a standard soldering iron or station. Just use the one you already own. If you do not have one, the cheapest basic one will work.
  • 1. Prepare a normal soldering station or iron for use. Use what you already have. This will work if you don’t already have one.
  • Soldering irons and stations should be preheated. Use the one you already have. It’s perfectly fine. Even the most basic one will suffice if you don’t have one already.
  • It’s possible to make the weld stronger by gluing the components together with crazy glue before welding them together. Alternatively, staples can be used to reattach the two halves.
  • 5. Make sure you’re covered in the event of an attack. To protect yourself from the harmful vapors produced when joining plastic pieces, wear a face mask and work with gloves. You must take precautions to avoid being burned by the hot plastic.
  • Let the weld cool before checking to determine if it’s strong enough to stand the test of time. If this is the case, you may want to add strength to the weld by melting some of the leftover plastic scraps on top of it.

Tupperware Lid Bent

Because Tupperware goods come with a limited lifetime guarantee, you can contact your local Tupperware representative to check if this lid will meet those requirements.

There are three solutions if the bent lid doesn’t meet the requirements. Of course, the severity of the bend will have an impact on their success. These simple solutions may not be sufficient for all curves, but they are a good place to start.

Another option is to place a bowl of cool water in your microwave for a few seconds, then replace the top as best you can. The steam from the water can help soften the plastic, so you can try to unbend it once it’s warmed.

My Tupperware Lid is Stuck After the Microwave



Many individuals mistakenly believe that microwave-safe plastic lids are included in the definition of microwave-safe. The answer is negative, and it’s better to avoid heating anything in the microwave that comes with a plastic lid unless it’s guaranteed to be safe. Even Tupperware could be at risk.

You can do this by reheating the bowl in the microwave again for a brief period of time, then removing it. After then, remove the bowl from the oven and remove the lid before waiting for it to cool again. This is the most straightforward approach.

Using dull butter knives to pry off the lid has been recommended by some, however that is a crude method that may not work or damage the lid in any case.” When you remove the lid, you could inadvertently inhale the steam, which could cause you to burn yourself.

Tupperware Lid Melted in the Dishwasher

As a result, in this situation, you may only have one option. If you have any questions, you can reach out to Tupperware via the website provided above or by speaking with a Tupperware representative directly. It’s possible that your reputation may not be as beneficial if you go with the second option.

The lid may be your only option if you can’t find a way to fix it. As for your dishwasher, it may be necessary to replace the heating element. There are ways to remove melted plastic from an element, but not all of them work for everyone.

You can try to peel off the plastic after 30 minutes by laying ice on the melted plastic. However, this does not always work. A dull knife can be used to scrape the plastic off, but the results may not be promising.

Using a hairdryer could be a possible solution. Dishwasher elements should be cold and there should be nothing in them. Then use a dull piece of wood or another material to scrape the plastic off with your hairdryer (non-plastic).

After that, use a warm, moist cloth to remove any remaining plastic residue. Finally, run your dishwasher through a hot cycle to eliminate any remaining plastic that wasn’t removed throughout the cleaning process.

Why Are My Tupperware Lids Sticky?



If you want to keep your Tupperware guarantee valid, make sure you utilize the recommended cleaning methods found on their website. In order to maintain the validity of Tupperware’s warranty, we recommend using baking soda and water as a cleaning solution.

Be cautious to check with your Tupperware representative or even the company itself before attempting any home solution, even vinegar and water.

The lack of use is what’s intended to cause the sticky sensation. Murphy’s Oil was utilized by one person in place of the baking soda solution. They were able to get good outcomes, they said.

This website provides a lot of home remedies you can try but again, you should double-check first before using them.

Tupperware Cover Alternative

Many home remedies may be found on this page, but you should always check with your doctor before using any of them.

One solution is to use glass storage jars instead of plastic bowls and lids. Alternatively, you can use paper or cotton snack bags that will eventually decompose. It is possible to use any non-plastic bag for this purpose.

Compostable cling wrap is available. Despite the fact that they’re made of corn, these lids perform just as well as their plastic alternatives. A few of the ideas these people came up with are a little out of the ordinary, but most are plain common sense.

It’s possible to cover your Tupperware bowl with a rubber band or non-plastic paper.

Do Tupperware Lids Shrink?



No doubt they will since it is made of plastic. It’s more accurate to say they’ll distort in a way that suggests shrinkage and prevent the lid from fitting. However, if the lid hasn’t shrunk significantly, it can be made to fit properly again.

Check to determine that the lid fits after the bowl has been heated evenly. If the lid doesn’t fit, don’t heat the lid but keep heating the bowl until it does. At this point, cool the bowl and lid down quickly to maintain their shape.

You can try heating the lid, and we’ll show you how to accomplish so in the next step.

How to Stretch Tupperware Lids

There will always be a role for heat in plastics’ solutions. In order to shrink or reshape plastic, you will require heat. If you try to acquire a lot of stretch, the integrity of the lid will be compromised, and the results will be uneven.

This is fine, but you can also try heating the lid under running water, then placing the cover back on till cool. Alternatively, you can place the bowl in boiling water for 15 minutes, then place the cover on top.

It’s possible to get a warranty void if you use a dishwasher, according to our investigation. You can get a warranty on even 60-year-old Tupperware.

How to Get Tupperware Lids Replaced



Contact your Tupperware representative as soon as possible. They should be able to glance at the lid and observe what damage has been done if they follow the correct approach. Using the Tupperware website, you can locate a representative in your area if you don’t know their name or phone number. On their website, you can look for a rep.

As an alternative, you can phone 1-800-Tupperware and talk to the corporation personally, as not all agents are that excellent. Use their website to get in touch with them, if you like. You can get some help with that by clicking on the link provided in the previous paragraph.

Both of these techniques are appropriate, and working directly with the corporation may save you some time and headaches.

Can Tupperware Lids Be Recycled?

There is no doubt that they are, and the majority of Tupperware goods (including lids) have the #1 or #2 recycling symbols on them. A look at the insignia on the packaging tells you that most recycling plants will take them.

All of the Tupperware lids and other items that you no longer use will have to be cleaned. You should also make sure that the containers are dry and empty. Even Tupperware with the #5 label should be recycled.

Recyclable containers must be accompanied by their lids, which should be placed on the containers before they are placed in a recycle bin or taken to the recycling facility. Plastic lids that are damaged, melted, bent, etc., should all be recycled rather than thrown away.

Recycle all plastics, even if they are not Tupperware products, because there is no place for them in the trash or the oceans.

What to do With Tupperware Lids



Don’t ever get rid of them. Get a replacement from Tupperware if they don’t fit the bowl or other container, and then recycle the lids. Even if they don’t fit, you can attempt one of the various methods mentioned to get them back in the right place.

The Tupperware containers are simple to reuse, but the lids are more difficult. When possible, it is best to recycle them so that they can be reused. Remember that even damaged plastic Tupperware lids may be welded back together and reused.

Some Final Words

Tupperware lid repairs necessitate applying heat. This is the very first step you must take. Finding the proper amount of heat and the right source is key to avoiding damaging or voiding the lid’s warranty.

You can learn more about Tupperware by visiting this link, which will take you to the main page of the company’s website. Get in touch with your local Tupperware dealer if your lids are no longer sealing properly.



I'm an content manager