Updated at: 03-08-2022 - By: Helen Skeates

Even if there isn’t a fire going, a fireplace may add a cozy atmosphere to your living room, but a weathered and fractured chimney can let rain leak into your home during the colder months. Paint on walls can bubble, peel, and flake as a result of exposure to water’s wetness over time. With a tiny bit of water damage, you could lose your cozy living room for good.

Do you have a water-damaged region in your residence? When it comes to dealing with water damage, it’s not always as frightening as it sounds. For those who are interested in taking on the task yourself, we’ve outlined a simple step-by-step guide. If you’re unsure about how to complete a project, we always suggest consulting with our knowledgeable staff before you begin.

Steps To Repairing Water Damage

Clean The Area

Give the water-damaged area a thorough cleaning before you begin any work on it. The first stage in any paint endeavor, including the restoration of water damage on walls, is to thoroughly clean the surface. We suggest using a Selleys Sugar Soap and a moist towel to clean the area, and then letting it air dry.

How To Repair Water Damage In Your Living Room - Inspirations Paint

Clear And Scrape Any Flaking In The Area

A scraper can be used to remove all bubbling, peeling, and flaking paint.

Cover Water Damaged Area With A Peel-Stop / Sealer Binder

Zinsser’s Water Based Peel-Stop was utilized for this. Permeating the porous surface, this acts as a glue to keep water from re-entering. In essence, it restores the area’s solidity and guards it against further water damage. Allow an hour for the Peel-Stop to dry after application.

Apply Filler

To prepare the surface for painting, use a filler once the surface has dried and become solid. It’s recommended that you let this phase dry for at least a full day. Although we sped up the drying period in the video above by utilizing a hair dryer, the recommended drying time is one day.

Selleys Polyfiller was employed in this procedure. Because it’s quick-drying, it’s ideal for the colder months.

Sand Surface

Make sure your filler is completely dry before sanding the surface.

Apply Water-based Primer / Sealer

Applying paint will be a breeze after this stage is completed. For gyprock surfaces, a water-based primer/sealer is typically employed. For interior surfaces, water-based primers and sealers are suggested. Berger Triple Prep, a ceiling, wall and timber prep paint, was used in the video above. This allowed us to apply it on the walls and architraves.

Apply Paint

Now that you’ve cleaned, protected, and primed your wall, it’s time to add some color and personality to your space. We used Berger Everlast for the walls and Dulux Snow Season Quarter for the color in the video above. We used Berger Water-based Enamel in Gloss to paint the architraves and left it white as-is.

There’s no need to explain what happened. To get a full picture of what happened, check out this video. It used to be an unappealing, water-damaged living room.

How to effectively remove moisture from walls after water damage

Moisture can be difficult to remove from your walls and paint if it has made its way into the nooks and crannies. Even though your walls appear dry, it’s better to be safe than sorry.

Open the doors and windows of your house to speed up the drying process of your walls. Alternatively, you can use a fan to direct air toward the moist walls.

In addition, dehumidifiers will come in handy. There is a good chance that it’ll help dry out the walls. Baseboards and molding can also be removed to prevent moisture from seeping into them, which will help the evaporation process.

How To Repaint Water Damaged Wall In 8 Easy DIY Steps - Krostrade

Is it okay to just paint over peeling paint?

It’s common for painting to necessitate additional preparatory steps. Prior to applying primer and paint, you must first apply filler.

However, if you only have a little area of peeling or chipping paint, you may simply brush it off, prime, and paint. As long as the damaged area’s boundaries are still stable, this is a viable option.

How to detect wall water damage.

Softened drywall, bubbling or discoloration in the wall are all signs of wall water damage.

Your drywall may have been damaged by water if you see any of these symptoms. What’s wrong? Behind the wall, there may be undetected water damage.

Whenever you see any of the following symptoms, you should seek the advice of a trained specialist. Mold, rotting, and electrical issues can all be found in the aftermath of major water damage.

How to dry out walls after water damage.

Using a dehumidifier and a lot of towels to dry off wet walls is a good idea. Blot the walls while the dehumidifier is running to remove any remaining moisture. Be careful not to harm the drywall by pressing too hard.

Once the initial wetness has been dealt with, call a water damage professional. Mold, rotting, and electrical risks may be lurking behind your wall as a result of water damage. The degree of the damage may be determined by a wall water damage professional, who can also ensure that your property is safe.

Addressing water damage

As soon as you discover a problem with water damage, act quickly to remedy it. Within a matter of hours, water can inflict extensive damage that you won’t be able to notice from the outside.

Mold, electrical dangers, rotting, and corrosion can occur if water seeps into your frame materials, insulation, and drywall.

The irony of water damage to walls is that it can lead to fires due of electrical issues. Due to the negative health impacts and hefty repair costs, mold growth should be a major worry for anyone dealing with wall water damage.

Water damage professionals in Atlanta, Georgia

If you suspect a leak and look for certain signs of water damage on the walls, you may be able to find them. Not knowing what’s going on behind your walls is a problem that can have long-term effects on your health and your house.

After a downpour, look for signs of water damage to the walls, such as dripping pipes or malfunctioning appliances. In the long run, look into any strange odors, particularly moldy or musky ones.

You may rely on Revere Construction and Roofing if you live in Atlanta and the nearby suburbs! To get a free assessment of your water damage, please use our contact form and we’ll come to your home!

Can I paint over wet wood?

Is it possible to paint on damp wood? Wet wood can be painted despite the fact that this is not recommended. You may still produce a high-quality finished product while reducing drying time using a few simple techniques and the appropriate materials.

How much does it cost to fix a water damaged wall?

Gray water extraction from a flooded bathroom, including drying and drywall 1 and ceiling repairs, costs the average homeowner $3,000, with restoration costs typically ranging from $2,000 to $5,000. Restoration of Property After a Flood. The maximum cost of water damage restoration is $8,000.

Water Damaged Drywall- Repair or Replace? - Damage Buddy

What happens when water gets in your walls?

Mold, electrical dangers, rotting, and corrosion can occur if water seeps into your frame materials, insulation, and drywall. The irony of water damage to walls is that it can lead to fires due of electrical issues.

Is drywall ruined if it gets wet?

When exposed to water for an extended period of time, drywall can be damaged. The structural integrity of the drywall is undermined if moisture damage is not addressed quickly, causing it to become soft, fragile, and vulnerable to mold growth.

How long does it take to dry out water damage?

As a general rule of thumb, you should expect water- or moisture-damaged sections of your home to dry in about five days. In some cases, a spot can be dried in as little as two days, while in others it may take weeks.

How long does it take for mold to grow on wet drywall?

Wood, cardboard, wallpaper, carpets, drywall, cloth and other organic materials are all at risk of mold growth due to mildew (mold in its early stages) and other molds. Within 24 to 48 hours, colonies of mold might begin to form on a damp surface.

How long does it take drywall to dry after a leak?

Generally speaking, it takes three days for wet drywall to completely dry out, although this depends on a variety of circumstances.

How do you fix drywall that got wet?

Using drywall screws and drywall clips, attach the new piece to the hole in the wall. It can be done with drywall tape and some joint compound. The region should be sanded smooth. Once the surface has completely dried, you can begin painting.

Can you fix water damaged wood?

Cleaning Up After a Flood: A Simple Guide Getting rid of rotten wood is the first stage in the process. You can use auto filler putty to fill in the sections that have been cut out. Priming and painting the hardwood surface is all that’s left to make it appear like new.

How do you remove moisture from wood?

It is time to put in a dehumidifier to remove any remaining moisture. As high as it will go in terms of extraction. To remove moisture from the boards, turn it on and let it running for at least 24 hours. To speed up the process of drying the wood, place fans across the surface.