Is your stroller in need of a thorough cleaning? Your stroller takes a beating from all of your outings, whether it’s a trip to the shop, a walk in the rain, or your child eating or drinking.
One of those chores that we can all do without is cleaning out the stroller. The majority of us avoid it because it feels like a burden. But it’s not as difficult as you may assume.
Why You Should Keep It Clean
Due to their lower immunity than adults, infants should only be exposed to clean and germ-free items on a frequent basis. Cleaning a stroller on a regular basis is essential because most parents use it every day.
How Often Should You Clean It?
The more time you put off cleaning your stroller, the more difficult it will be in the future. After each use, it’s a good idea to give it a thorough cleaning. If you’re pressed for time, make it an evening ritual to prepare for the following day.
However, this does not need bringing out the big weapons at every opportunity. Do the little things, and you’ll be OK. Clean the wheels of mud and grime. Your child’s sticky mess can be removed by wiping the fabric clean.
This will reduce the frequency with which a thorough cleaning is required.
How to Clean a Stroller
Check out the details below if you’re unsure of where to begin or what you need. We dissect the stroller piece by piece.
1. The Fabric Areas
What You Need
- It’s a vacuum.
- Wet and clean cloths. A excellent option is a microfiber one.
- Brush your teeth gently with a toothbrush or a cloth brush made of a supple material.
- Water that is just barely warm enough to hold a hand in.
- Baby-friendly soap.
- Disinfecting wipes that are suitable for babies.
Dealing With Mold and Mildew
Take a Minute to Think About It
It’s possible for mold and mildew to grow on your stroller’s cloth if it hasn’t been used much or if the weather is wet.
Ventilation is the first step.
Wear a mask and work outside to avoid breathing in any spores.
Brushing your teeth is the second step in the process
Using a stiff-bristled brush, remove the mold. If you see any mold, use lemon juice and salt to clean it up.
Spraying two parts water to three parts white vinegar in a spray bottle will eliminate large amounts of mold. You should next wash the baby stroller with soap and water once you’ve sprayed it down the entire area.
Non-chlorine bleach and water can be used to eliminate mold if the cloth is acceptable. The suggested bleach-to-water ratio is two teaspoons per quart.
Carefully Consider Your Options
Mold and mildew can be removed from the cloth by following the instructions in step 7 below. If you haven’t finished cleaning all of the surfaces, proceed to step 3.
The Cleaning Process
Check the Manufacturer’s Specifications in Step 3
The first step in cleaning your stroller is to read the manufacturer’s instructions. Different textiles are used to make baby strollers, and some of them require specific maintenance. They may be made of materials that are resistant to fire or water.
Some fabrics can be washed while still on the frame, while others must be removed and cleaned that way.
To clean a non-machine washable cloth, follow the instructions listed below.
It’s time to vacuum.
Suck up all of the stray crumbs and trash with the flexible hose attachment. Pay special attention to the stroller’s seams and the area where the seat joins the back.
The vacuum bag should be discarded if mold or mildew has been found.
Preparation of the Soap, Step 5
In a small bowl, combine a tiny amount of soap and lukewarm water. Having a lot of suds will make cleaning up a pain.
Step 6: Rinse and Dry the Fabric.
Wring out any surplus soapy water with your cloth once you’ve dipped it into the bowl. Clean your stroller’s cloth with a soft brush.
Keep an eye out for any blemishes. To remove stubborn stains, you may need to use a soft fabric brush or a toothbrush.
Step 7: Wash and Dry
If you’re using a cloth, make sure to wipe it thoroughly before continuing.
Gently wipe over the fabric to remove any soap residue or other materials that may be left behind.
Disinfecting is the eighth step.
Use a disinfecting baby wipe to clean and freshen up the fabric.
Step 9: Drying Time
Make sure the stroller is completely dry before storing it in the trunk.
If cleaning is still necessary after drying, use the processes outlined above.
2. Cleaning the Frame
Remove any food trays, bumper bars, or cup holders before washing the frame. When the stroller is taken apart, it’s simple to clean these parts independently.
What You Need
- Soap for washing dishes.
- Water that isn’t too hot.
- A gentle scrubbing brush or a toothbrush.
- Use a scourer to clean the surface.
- The fabric is quite pliable and pleasant to the touch.
- Disinfectant wipes for babies.
Make the Soap and the Sponge.
Rinse your dishes with little warm water and a little dishwashing soap mixed in a small bowl. A lot of suds won’t be good.
Squeeze out any extra water with a sponge dipped in the mixture.
Time to clean up after the first step
Remove any dirt and stains from the frame by wiping it down. Ensure you reach every crevice, especially the handle, and that you don’t miss anything.
Debris can be removed from difficult-to-reach areas with a toothbrush or scrubbing brush.
In order to get rid of tough stains that the sponge just won’t lift, try using a scourer and scrubbing them gently.
Step 3: Rinse and Dry
Wipe away any soapy residue with a clean cloth or a new one.
Disinfecting is the final step.
Apply a disinfectant cloth to the frame in order to remove any lingering bacteria.
Step 5: Allow it to Dwell
It won’t take long for the metal and plastic to dry up, so you can get back to using the frame. Using the sun’s rays to speed up the drying process is highly recommended.
3. Cleaning the Wheels
Your stroller’s wheels are going to get dusty sooner or later. There is no need to clean them after every usage, but they should be inspected frequently to ensure they are in good working order.
Wheels and the area around the brakes can become infested with small stones or pieces of glass. This can affect the ease with which your stroller glides and the effectiveness with which its brakes function.
What You Need
- A sliver of bristles.
- Gently decontaminating.
- Water that isn’t too hot.
- Soap for washing dishes.
- Use WD-40 or the lubrication that the manufacturer recommends.
Step 1: Make sure the wheels are in good working order.
Check to see whether your wheels can be removed before cleaning. The majority of them are detachable from the chassis via a mechanism. Cleaning them will be a breeze as a result of this.
Step 2: Get Rid of the Bigger Stuff!
You can remove any sand or dirt from your tires or rims by simply using the tiny brush.
Step Three: Clean the Tires
Scrub the wheels with warm, soapy water to remove any debris.
Use hotter water and keep scrubbing if there are stubborn stains. Resist the urge to give up.
Step 4: Rinse off.
Afterwards, wash off any soap residue with water. It’s easiest to use a hose, but you can use any water source.
Cleanse in Step 5
Use a mild disinfectant to clean the wheels.
Step 6: Allowing time for the paint to dry
Let the wheels dry out in the sun, if possible.
Reattach and re-inspect after Step 7
This is an excellent moment to inspect the tires for damage before reinstalling the wheels on the stroller. Check the air pressure if they’re pneumatic. Also, make sure there are no holes or other flaws that could prohibit them from working.
Make sure the brakes are working properly by conducting a thorough inspection. Brush out any material that may have gotten stuck in there.
Make that the wheels and brakes are moving freely. Apply lubricant if there is any creaking or jerky movement.
4. Cleaning the Accessories
Because they’re not part of the primary stroller, don’t overlook them. Dishwasher and washing machine safe for some. Make sure to follow the manufacturer’s cleaning guidelines.
If this isn’t the case, wash them in soapy water and use baby-safe wipes to clean them. These Medela wipes are gentle on babies’ delicate skin and convenient to use.
Stroller fabric should be cleaned the same way you clean your stroller hood, canopy or sunshade.
Also, don’t forget about the stroller’s shopping basket. Any dust or other debris that may have accumulated should be vacuumed out thoroughly. Check with the maker to determine if it can be washed in the washing machine.
Top Tips for Cleaning a Stroller
Here are a few additional ideas and tricks to help you keep your stroller in top shape:
- Reassembling the fabric can be a challenge after cleaning because of the difficulty in reattaching the fabric once it has dried. After reassembling, let it dry out on the frame.
- To be fair, the skewer is a great tool for reaching into places that are difficult to access, such as the underside of cup holders. Consider using a toothbrush to get into those hard-to-reach places that require a good cleaning.
- Check for stroller care labels on the actual stroller. On the fabric or frame, you may find instructions on how to clean them properly.
- Choosing a place to keep your stroller when it’s not in use is an important consideration. When it’s humid or wet, folding it up could encourage mold or rust formation. Be sure to store it completely dry before doing so.
- Don’t leave your buggy in a room with a hot heater or in the sunroom if you don’t have to. Plastic clips might be damaged by this.
- If you plan to store your stroller for an extended period of time, consider purchasing a dust cover. Cleanliness and protection from the sun are ensured by this method.
- The storage stroller should not be stacked on top of anything else. Accidental damage can result from this.
- Perform a spot test on a small area of the fabric before using any cleaning solution to guarantee that the color of the fabric will not be altered.
- It’s best to avoid chemicals wherever possible, as they might damage the components of your stroller as well as your baby’s health.
- Plan your timetable: Make a cleaning regimen for your stroller. If you do it more frequently, it will take you less time.
Can mold be washed out of fabric?
Joyce recommends using bleach to eliminate mold and mildew from white cotton garments. Using one part bleach to three parts water, gently dab the stain for a few minutes, then wash the garments as you normally would.
How do you remove black mold from fabric?
diluted vinegar can be worked directly into the stain, or the clothing can be pre-soaked in a pail of water mixed with one cup of vinegar for best results. To get rid of mildew odors and brighten your whites, you can run your washing machine with 1-2 cups of vinegar added per cycle.
Is vinegar or bleach better for killing mold?
Vinegar is a better mold killer than bleach. “It signifies that the mold will return. In fact, the mold will grow back stronger since it sees the bleach as a “threat.” Using bleach on porous materials like drywall or wood causes mold to move deeper into the surface in order to avoid the chemical.
How do you clean a stroller with vinegar?
Using a spray bottle, combine three parts white vinegar with two parts water. Rinse well after an hour of soaking the area with the vinegar mixture. Because it uses severe chemicals, this should only be used as a last option.
Can you power wash a stroller?
Rinse the stroller well with a pressure washer or high-pressure hose. Take the stroller to the “DIY car wash” nearby you if you don’t have a pressure washer. The stroller will last longer if you let it to air dry in the sun.
How do I clean my Thule jogging stroller?
It is recommended that you clean your Thule jogging stroller with warm water and soap on a regular basis.
How does vinegar remove Mould from fabric?
Mold and mildew odors can be removed from your garments with vinegar. The garment should be soaked for at least an hour in a pail of water that has one cup of white vinegar in it. Then, use your standard detergent, like Persil Non-Bio, to wash your clothes in your washing machine at the hottest temperature available.
How does vinegar get rid of mold?
Spray the vinegar directly from the bottle without diluting it. Directly on the rotting surface, spray it. For at least an hour, let the vinegar sit. Scrub the moldy surface with a brush with soft bristles until the mold is removed.
How does vinegar remove mildew from fabric?
In order to get rid of mildew from clothing, you can use vinegar and baking soda. Remove any stray mildew from your house’s fabric by brooming it away. Mix 1 part white vinegar with 4 parts water in a soak solution and let the mixture to sit overnight. For 15 to 30 minutes, immerse the garment in water. Load the washing with clean clothing.
Can I leave vinegar on mold overnight?
For killing black mold, use vinegar on nonporous surfaces only. When it comes to household cleaning, deodorizing, and disinfection, white vinegar is a go-to ingredient. Black mold, which usually occurs after water damage, can also be killed by this method. Spray the moldy area with vinegar and let it there for an hour.
Is vinegar or hydrogen peroxide better for mold?
Mold can be cleaned with hydrogen peroxide, one of numerous household substances. Another great method for removing mold from your home is to use vinegar. Hydrogen peroxide and vinegar should not be mixed, though.
What kills mold instantly?
A solution of diluted bleach is the most efficient method for removing mold from walls and floors in this situation. Add one cup of bleach to one gallon of warm water in a bucket and stir until the bleach is dissolved. Then use a stiff-bristled brush dipped in bleach to clean the mold thoroughly.
How do you get mold out of cloth car seats?
White Vinegar can be used to remove mold from automobile seats. White vinegar or alcohol can be used to get rid of mold on automobile seats, carpets, interiors, or wherever else mold grows in your home. Because it is acidic, white vinegar will combust mold and its spores, killing them and preventing their regrowth.
How do you clean a stroller with baking soda?
Using a damp sponge, apply baking soda directly on strollers, car seats, and high chairs made of metal, plastic, or vinyl. Clean it with a sponge and a hose. Vacuum after 15 minutes (or longer if there is a strong odor).
Can I hose down my stroller?
Rinse the stroller well with a garden hose to remove soap scum. Using a bucket to pour water on everything is an option if you don’t have access to a hose. Use a smaller brush to target certain areas. Using a soft fabric brush or a toothbrush, gently scrub the area to remove any remaining stains or dirt.
How do you pronounce Thule?
A phonetically incorrect English spelling of the word “Thule” does not make pronunciation difficult. Rack Outfitters says the right pronunciation is “too-lee.”
How do you clean a stroller tub?
Using a Bath Tub (Indoors) I soaked two non-bio laundry pods in hot water with 1/4 cup baking soda (also known as bicarbonate of soda) and then added 1/4 cup white distilled vinegar evenly when the tub was full enough to submerge the buggy.
How do you remove mold from outdoor cushions?
To clean fabric cushions, add a half cup of bleach to a gallon of water and mix thoroughly. Spray the solution on the cushion, then scrape off the mildew using a scrub brush.
How do you get mildew out of canvas?
Spray it with distilled white vinegar to put an end to the infestation. Allow to air-dry for a few days. Use a gentle brush and a mixture of salt, lemon juice, and hot water to scrub it. Don’t use detergent detergents or bleach, which will damage the canvas and make it difficult to clean up afterwards.
What laundry detergent kills mold?
There are detergents specifically designed to eradicate mold from your garments as they are being washed and cleaned. Oxiclean and Clorox are two mold-killing detergents.
As a result, you’ve learned how to properly clean a stroller and maintain it safe for your child to use. Do you agree that the task seems less overwhelming now?
Regularly cleaning your stroller will make your life easier, maintain it germ-free, and extend the life of your stroller. In addition, a well-kept stroller will fetch a greater price if you decide to sell it in the future.