How To Keep The Mattress From Sliding On Box Springs? Comprehensive Guide

Helen Skeates
Helen Skeates
19 min read

Is there a way to keep the mattress in place on the box springs? Paddings, rubber matting, and other options are available.

Keeping your bed in place can be difficult if it constantly slipping off or sliding about on your box spring.

My mattress keeps slipping out of my bed frame, which annoys me because I like to keep my room neat and tidy.

So I’ve tried a variety of methods to keep it in place, as well. What’s more? Others prove to be fruitful.

To help you maintain your mattress in place, I’ve compiled a list of five suggestions and tricks in this post. We are ready to go now.

Mattress And Box Spring

When it comes to box springs, Velcro, carpet tape cleaning, or rubber mats are the best ways to deal with an unruly mattress.

A non-slip mattress should be your last resort when it comes to changing your mattress.

Nonetheless, keep reading for more information.

5 Benefits of A Good Mattress

1. Achieve Adequate, Quality Nighttime Sleep

The most important benefit of a good mattress over a bad one is the ability to sleep, rest, or nap comfortably every time. There are a wide variety of mattress types available that give different levels of comfort and support, depending on the sort of sleeper they are aimed for.

In order to get a good night’s sleep, your mattress should be supportive, rather than ruining it. If you wake up in the morning with aches and pains after a bad night’s sleep, it may be time to invest in a new mattress. If you’re suffering from persistent back discomfort, go here immediately to see the best mattress choices.

2. Promote Good Form and Posture

It’s possible that people aren’t even aware that they have varied sleeping positions. You may keep or improve your posture and form by having the proper mattress, not simply a decent one. If you sleep in the same position every night, you need a mattress that encourages appropriate posture and form.

How to keep an RV mattress from sliding? - RTV Atlas

Because of their fetal sleeping position, side sleepers are more likely to suffer from back pain. When placed against the mattress, it can also put pressure on the arms and shoulders, which can cause blood flow to be restricted. If you sleep on your right side, your organs may also be put under additional strain.

Memory foam mattresses, on the other hand, are perfect for those who prefer to sleep on their side. The responsiveness of the material helps to keep the spine aligned while also providing pressure point relief. But if you choose a mattress that isn’t designed for side sleepers, your joints and spine could be at risk. As a result, consider your sleeping position while selecting a mattress.

3. Keep Your Mental and Emotional Health in Check

The quality of your mattress has a direct impact on how well you sleep. A terrible mattress can lead to sleeplessness at first, but if you sleep on it every night, you’ll soon suffer from sleep deprivation. Short-term and long-term effects of sleep deprivation have been documented, and they can have a significant impact on your physical, mental, and emotional well-being.

The following are some of the most typical affects on your mental and emotional well-being of getting insufficient or bad sleep:

  • Absence of focus and acuity.
  • Grogginess and excessive yawning are common side effects.
  • Promotes irritation and mood swings.
  • Addictive disorders such as attention deficit hyperactivity disorder (ADHD) are exacerbated (ADHD).
  • Poor cognitive functioning and performance are induced by this medication.

By using a high-quality mattress, you will have a better night’s sleep, and you will be less likely to suffer from the health issues listed above. In order to get the ideal sleep, you’ll need more than just a comfortable bed. That brings us to our following point.

4. Develop an Inclination to Your Sleeping

Sadly, some people find it difficult to sleep for a variety of reasons, including a terrible mattress. People can also neglect to sleep because they are too preoccupied with hustling at school, job, or other activities. You might be able to get your sleep back on track with the right mattress.

A bad mattress could be to blame if you don’t feel rested when you wake up. When you create a pleasant sleeping environment, you are more likely to get some shut-eye.

Do not neglect the importance of a good night’s rest. Here are some suggestions for making your bedroom more conducive to slumber:

  • Your bed should be reserved for sleeping or having sex with your partner.
  • Do everything you can to keep the surrounding area quiet and distraction-free.
  • Set the temperature to 65 °F or 18.3 °C.
  • All electrical devices should be kept out of the reach of children.
  • Decrease the amount of visual noise in the environment
  • In your bedroom, use colors that are a bit more muted.

5. Get the Most Out of Your Purchase

Today’s mattress prices are no laughing matter. Even the most affordable mattress options might be tough to afford, especially if you have a lot of home and personal obligations.

This means that a good mattress is an investment you’ll have for the rest of your life. You can get the most value out of your mattress purchase because high-quality mattresses can endure for a few years, especially if they are properly cared for.

Look at the typical mattress lifespan:

  • 5 to 6.5 years for the innerspring
  • About six to seven years.
  • Latex: ages 5 to 8.5
  • A mix of the two: 5 to 7.5 years old

5 Ways To Keep The Mattress From Sliding On Box Springs

Is there a way to keep the mattress in place on the box springs?

My list of experiments is as follows.

If you’re having trouble keeping your mattress in place, don’t panic, since we’ve compiled a list of five techniques to do so.

Way #1. Use vacuum

You can use a vacuum to keep your mattress in place if you have one at home.

This will help your mattress stay in place if it keeps sliding out of your bed frame.

You may be slipping because of dust buildup on the surface of the mattress, therefore cleaning it will help keep you upright.

In addition to vacuuming the mattress, you should also vacuum the bed frame and the area beneath it.

Way #2. Use carpet tape

If your rug is constantly shifting, you may want to give carpet tape a try. If you have one, you can utilize it with your mattress that is out of control.

To retain the mattress firmly in place, it has been tried and true. A short-term fix is all that can be expected from this method.

Carpet tapes are widely available and can be purchased from any local department store or from several internet retailers.

Way #3. Mattress pads

Placing rubber matting or non-slip material beneath the mattress is a simple solution.

Non-slip mattress pads

There are a variety of non-slip mattress pads available for purchase at most bed stores.

To prevent the mattress from slipping, the materials are commonly constructed of PVC rubber linked to both the mattress and the bed frame.

If your problem persists, try inserting a support under your mattress and testing it to see if it helps.

How to Keep Mattress from Sliding - Easy Tips That Actually Work!

Rubber matting

Rubber matting is an additional alternative for mattress matting, if you prefer that material. Rubber matting for carpets can be purchased as an alternate solution.

If your rubber matting is larger or longer than your mattress, you will need to make a corresponding cut in the rubber matting.

This strategy is more cost-effective than purchasing gripping pads, which can be expensive.

If you’re on a tight budget, it’s worth looking around for the best deal.

Way #4. Bed frame change

Change your bed frame if none of the other solutions work for you.

In the event that your mattress does not fit the bed frame, your options are limited.

Changing your bed frame may be your only option, so consider all of the aforementioned options before making a final decision.

Way #5. Switch out mattress

The idea of changing out your bed frame may look like a plausible choice here, but it might work for you in the long run.

Changing the mattress would cure your problem, as the issue is with the mattress.

Check to see if the new bed you choose will accommodate your box springs.

Why Does The Mattress Keep On Slipping Off?

Your mattress might come off the box spring for a variety of reasons. The following are some of these elements.


The mattress will easily slide off any surface due to the absence of friction.

This is especially true for mattresses made of memory foam or latex.

Because of the composition of the materials, these mattresses have a difficult time adhering to a flat surface.


If your bed base or frame is uneven, your mattress will have more room to move about, which can lead to it falling off.

Make sure that the mattress is perfectly aligned with your bed frame in order to get the most out of your purchase.


Rails are a great way to keep your bed in place. Some mattresses, on the other hand, do not necessitate one.

You may want to try installing rails to your mattress if it continues falling off the frame.

Add some headboards or a tiny rail to the sides of your mattress to keep it in place.

Mattress age

Yes, the age of the mattress may also be a problem. Over the course of ten years, a mattress may accumulate body oils and excretions.

Under the mattress, the oils could create a gliding film. Think about buying something else.

Routine Mattress Maintenance

Proper mattress maintenance will help you get more use out of your mattress for a longer period of time. Rotating and flipping mattresses, making sure that your mattress is properly supported and cleaning it on a regular basis are all part of mattress care. Keeping your sleeping surface clean and free of damage can be accomplished in part by utilizing a mattress protector and changing your sheets on a regular basis.

Rotating Your Mattress

Sagging or permanent indentations in the areas of the mattress where the majority of people sleep are to be expected. Most manufacturers advise routinely moving the mattress from head to foot in order to evenly break in the sleep surface and prevent uneven softening.

Every six to twelve months is a good time to rotate a foam or latex mattress; after that, a modern innerspring mattress should be turned every two to six months. Rotating some mattresses is not recommended. It’s possible to ruin the comfort and support of your mattress by rotating it, for example.

It was common for earlier innerspring mattresses to have only a few comfort layers, so both sides of the bed felt the same. Sleepers may turn the mattress over as well as rotate it because of its symmetrical construction. A softer comfort layer on the top and harder support core on the bottom is common in modern mattresses. These mattresses are designed to be used only one way, and should never be flipped over.

In some cases, a flippable mattress is available from some manufacturers. It is important to follow the manufacturer’s instructions when rotating and flipping.

Changing Your Sheets and Bedding

Hygiene and mattress protection are two significant reasons to wash your sheets and bedding regularly.

If you don’t change your sheets, blankets, and pillowcases on a regular basis, sweat, body oils, and other debris can soak into your mattress. Dust mites and other allergens can wreak havoc on allergy sufferers’ ability to get a good night’s sleep.

If you share your bed with pets, you should wash your sheets and pillowcases more frequently than once a week. It may be necessary to wash bedding more frequently in the spring and fall for those who live in warmer regions or for those who suffer from seasonal allergies.

Less frequent washing is possible for items that do not come into contact with the sleeper. Once or twice a month, you should wash duvet covers, comforters and blankets every two to three months, and pillow inserts every four to six months, depending on the type of pillow. Be sure to follow the washing instructions provided by the product’s maker.

Using a Mattress Protector

Under the fitted sheet, the mattress is protected with a mattress protector. Dirt, sweat, dust mites, dampness, and other contaminants are kept out of the mattress by mattress coverings. Washable mattress protectors are the norm these days.

To keep liquids from getting on the mattress, the majority of mattress coverings are either waterproof or water-resistant. A waterproof mattress protector can also assist prevent the growth of mold and mildew by keeping the mattress dry. There are mattress encasements on the market, which form a seal around the entire mattress on all six sides, keeping bed bugs out.

Mattress toppers and pads are not the same as mattress protectors. Mattress protectors are primarily designed to keep the mattress free of dust mites, while mattress pads and mattress toppers are designed to enhance the mattress’s comfort. Despite the fact that they aren’t designed to provide protection, cushions and toppers can nevertheless be useful in reducing overall wear.

Almost all mattress warranties include a condition stating that a mattress’s warranty will be void if it is soiled or otherwise damaged. Mattress covers not only protect the mattress from spills and stains, but they may also extend the mattress’ lifespan by keeping the guarantee intact.

Using Proper Support

There must be a sturdy base to prevent unequal weight distribution, which can lead to incorrect spinal alignment and harm the mattress.

As was customary, box springs were paired with innerspring mattresses to provide additional springiness and stability. Increasingly, people are choosing slatted bed frames or strong foundations for their foam or hybrid mattresses.

The support system you choose must be able to handle not only the mattress’ weight but also the weight of all the people sleeping on it. The varieties of bases that can be used with a mattress are typically specified by the mattress manufacturer. Weightier or larger mattresses may necessitate an extra set of legs in the middle of the bed frame; whereas, foam mattresses may call for a tighter spacing between the slats. In most cases, the warranty will be voided if you don’t get proper help.

How to Clean Your Mattress

Cleaning your mattress every six months may be a good idea in addition to washing your linens. The easiest approach to maintain your mattress clean is to check with the manufacturer, as each model has distinct maintenance instructions. The following are broad guidelines that apply to the majority of mattresses:

Regular Cleaning Steps

Cleaning your mattress begins with washing all of your bedding, including your sheets, pillowcases, and blankets, in hot water. Washing the mattress cover may be possible if it is removable.

When the bed is clear of obstructions, you can vacuum the mattress’ surface and sides with your vacuum’s upholstery attachment. You can use an all-purpose cleanser, followed by an absorbent cloth that has been submerged in cool water. It’s especially important to keep a memory foam or polyfoam mattress dry when washing it.

After allowing the mattress to air dry, sprinkle some baking soda on the top to remove any leftover odors. After a few hours, vacuum the baking soda with the upholstery attachment to remove any remaining residue. Do it all over again on the other side of the room.

Spills and Accidents

If you have an accident or spill something on your mattress, you should clean it as soon as possible. Getting the stain out of your mattress as soon as possible is key to preventing it from settling in. Dish soap, vinegar, hydrogen peroxide solution, or a professional enzyme cleaner can all be effective depending on the stain kind.

You may be able to clean your mattress less frequently if you use a mattress protector.

When to Replace Your Mattress

A new mattress is inevitable, no matter how well you take care of your old one. Average mattresses last between 7 and 10 years before they lose their support and pressure-relieving properties.

How To Keep The Mattress From Sliding On Box Springs? - Krostrade

The typical lifespan of a latex mattress is between 7.5 and 8.5 years. Innerspring mattresses normally endure between five and six years, foam mattresses between six and seven years, and hybrid mattresses between 6.5 and seven years. These figures, however, might differ greatly depending on the quality and design of the material, the sleeping posture and body type of the individual, and the routine of maintenance.

How your body’s weight is distributed when you sleep is affected by your sleeping posture and body type. If you sleep on your side, your mattress may sink sooner than usual around the shoulders and hips, and if you weigh more than 230 pounds, your mattress may sag all over.

Maintaining the cleanliness of your bedding and rotating the mattress is an excellent way to extend the life of your mattress. The mattress must also be used on a good foundation.

Having had your mattress for a while, you may be wondering if it’s time to get a new one or if the old one still works. Tossing and turning in your sleep or a lack of energy in the morning are all signs that it’s time to shop for a new mattress.

Mattress replacement is an investment in your health and well-being. However, it’s also a significant financial commitment. Adding a mattress topper isn’t a long-term solution, but it may extend the life of your current mattress a little longer.


I also had difficulty keeping the mattress in place on box springs, but owing to the methods outlined above, I’m already getting the most out of my sleep.

In the event that one method fails, do not give up.

Try a variety of approaches; you never know what will work.

Your mattress won’t slide off the box springs any more, thanks to the information you’ve just learned.

The following are five reasons why you should invest in a high-quality mattress.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.