Updated at: 14-11-2022 - By: Helen Skeates

If you have a garden, you should definitely get a swivel lawn chair. If you are having a party or just want to enjoy the yard from a variety of vantage points, this feature will come in handy.

The process of constructing one looks complicated at first, but it’s actually rather easy. This article will provide step-by-step instructions for building a swivel lawn chair for less than $25, along with helpful hints and advice.

5 Reasons Why We Love A Chair That Swivels

Improve Productivity

A swivel chair is convenient since it allows you to rapidly pivot in any direction. You can get documents from a nearby printer if you’re at an office or home study, and you can also use the cabinets, drawers, and filing cabinets there. A swivel chair in the living room makes it easy to get up from the chair and get the remote control, a drink, or a snack.

Image result for diy wood swivel rocker base | Poly outdoor furniture, Outdoor patio furniture, Outdoor decor


For convenience in transport, these seats are typically made from lightweight materials. If you need to move your chair from room to room in your home or from room to room in an office, you won’t need to be a powerlifter. A swivel chair’s adaptability makes it suitable for use in a wide variety of environments.


Swivel chairs are preferable to other types of chairs because they allow for greater freedom of movement and eliminate the need to twist awkwardly when seated. If you experience pain in your lower back when sitting, this style of chair can help alleviate some of the discomfort. And if you’re a nursing mom, you can get around with the little one without too much fuss.

Different Designs

You could assume that there is just one design for swivel chairs, but that is not the case. Here at Furniture Online, we carry a wide variety of alternatives, including gaming chairs, and every one of them can be swiveled a full 360 degrees.

Here are our best picks for a living room or home office to help you narrow down your options:

  • Incorporating a footrest into a swiveling chair design, the Berkeley Fabric Swivel Recliner Chair with Foot Stool is a contemporary option for lounging. The Berkeley can be had in a number of understated tones that will complement a wide variety of decor styles. Don’t forget to put your feet up on the convenient footstool when you’re done swiveling.
  • Tilbury Leather Swivel Recliner Chair with Foot Stool– this smart, stylish swivel recliner has soft black leather upholstery and a hidden secret… The Tilbury chair has a built-in, 8-point massage function, as well as superb back support. This chair also comes with a comfy footstool.


A swivel chair from us can be had for as little as £149.99.

All of our chairs are made with the consumer in mind because we don’t think quality should cost more. Our chairs are made from the finest materials available.

We trust that you will find your new swivel chair to be a wonderful addition to your home and will use it for many years to come.

Steps on How to Make Swivel Chair

First, determine the width of the seat of a chair that is both stable and comfortable. To prevent the fabric from sliding out from beneath you when sitting, measure the height you want your back to be on the sides of your preferred width and add an inch on each side.

Second, similar to hanging curtains, buy two rolls or sheets of the same length and trim one end to the floor.

Since this piece is shorter than the one that was used previously as the top, fold it inward over itself until the two ends meet in the front, then pin them together at the center and stitch through all layers, being careful not to get too close because heavy pins will damage the furniture if they are left in place.

Third, to facilitate the subsequent folding down, insert the pin through one side of the slit you just made and up to the flap on top.

Sew through all layers, making sure not to get too near because heavy pins will damage furniture if left in place; repeat with opposite end until they are put together at center point.

Lay the remaining fabric over the pinned-together flaps and secure it in place.

Fourth, fold each end up so that one end is dangling from the side panel and has enough excess material to tuck down under itself.

To complete the step, step 5 involves pinning the pieces together and stitching them together, but only to the halfway point of the length of each flap. This will provide enough room to turn the bag inside out.

Again, be careful not to stitch too close, as heavy pins left in place can cause damage to furniture, and continue doing this until all panels are sewed shut.

If you leave a half-inch overlap at both ends, turning the fabric right side out will create two layers that should be more than enough protection against any pinheads that may otherwise pierce through thinner material onto a completed surface, and so no additional reinforcement is necessary.

How to Lubricate a Swivel Lawn Chair

The use of a light machine oil for lubrication is recommended for metal parts.

An outside treatment will prevent your chair from rusting and the elements from wearing it down. This step is discretionary, but highly suggested for extended outdoor use.

Coastline Swivel Rocker by Furniture Direct | HOM Furniture

How do you make a swivel chair not swivel?

To keep a chair in one place, you need nothing more than a few metal washers. Insert one onto each bolt normally used to attach the swivel mechanism, and then use pliers or another suitable tool to snug them down. In most cases, this will keep it from moving as easily.

What type of wood do I use?

Some metal washers are all that’s needed to keep a chair in place. The swivel mechanism can be attached to the bolts by simply placing one on each bolt and then tightening them with pliers or another suitable instrument. This will prevent it from moving as freely in almost all circumstances.

How to Fix a Swivel Recliner that Won’t Recliner

Swivel chairs frequently break down and need to be replaced. This may occur quickly after delivery or years into its use. There are two main causes for this: either dust and grime accumulate on the chair’s glides, preventing them from rotating, or something becomes lodged under the chair, preventing it from moving.

The chair can’t be rotated because the dust and filth have accumulated on the glides or because something is jammed under it.

In order to inspect the mechanism at the chair’s base, you need start by taking away any fabric or upholstery coverings (such as throw pillows).

Flipping the fabric right side out will create two layers, which should be more than enough protection against any pinheads that might otherwise poke through thinner material onto a finished surface, so after making sure there are no obstructions, wipe away any grime, lint, or other debris with a damp cloth.

How to Clean and Maintain an Swivel Lawn Chair

Vacuum Dust and Debris

Your office chair needs to be vacuumed with the wand attachment every few weeks. If the wand attachment is smooth, it should be able to pick up most dust and dirt without damaging your desk chair. Set the vacuum at a low suction setting and run the wand attachment over the seat, back, and armrests.

Keeping your office chair regularly vacuumed will help it last longer and keep it looking like new, no matter what kind it is. The wand attachment will vacuum up dirt and grime that might otherwise settle into the chair’s upholstery and accelerate its demise.

Look for an Upholstery Tag

Look for a tag made of fabric or leather on the frame of your office chair. Most office chairs, but not all, will have an upholstery tag. The manufacturer’s instructions for maintaining the office chair are included on this label, which is also called a “care tag” or “care label.” Check the upholstery tag to see what kind of fabric your office chair is made of so you can clean it in the safest and most effective way possible.

The upholstery tag is typically located beneath the seat of an office chair. After finding it, see whether there’s a code for a deep clean inside. In the case of office chairs, a single or double letter serves as a cleaning code that indicates the most effective method for maintaining the fabric.

An explanation of the various cleaning codes found on furniture tags is provided below.

  • The most popular cleaning code seen on furniture tags is “W,” which indicates that the chair may be cleaned using water or a product containing water.
  • If the cleaning code on the upholstery tag is “S,” then you should use a water-free solvent to clean your desk chair. Office chairs made of organic fabrics like cotton, wool or rayon may damage when exposed to water, which is why manufacturers generally recommend the use of a water-free solvent.
  • If the cleaning code on the upholstery tag is “S,” then you should use a water-free solvent to clean your office chair. The use of a water-free solvent is typically recommended by manufacturers for cleaning office chairs upholstered in organic textiles such as cotton, wool, or rayon.
  • The last cleaning code is “X,” which indicates that the office chair should be cleaned exclusively by vacuuming or brushing. If your desk chair has this cleaning code, you shouldn’t use water or a chemical to clean it.

If your office chair doesn’t have an upholstery tag, the directions for doing so should be in the owner’s manual. Similarly detailed information on how to clean and care for an office chair should be included in the handbook even if the chair does not have an upholstery tag.

Spot Clean Using Soap and Warm Water

Unless otherwise specified in the owner’s handbook or on the upholstery tag, you can spot clean your office chair with soap and warm water. A spot or smudge on your office chair can be easily removed by blotting the damaged area with a damp washcloth and a drop or two of liquid soap.

Cleaning your desk chair won’t require any special detergent. Simply use a dish soap with a mild composition. Place a few drops of dish soap on a clean washcloth, then run it under running water. Next, wipe the discolored area or areas instead of scrubbing your office chair. A proper blotting will remove the staining components from the fabric. Scrubbing the stain will only spread the stain-causing elements even further into the fabric. So, when you spot clean your desk chair, don’t forget to blot it!

Test Stain-Removing Products in a Discreet Area

Simple soap and warm water should be sufficient to clean most office chairs, but for more serious stains, you’ll need something stronger. Many of the products designed to remove stains from fabric involve strong chemicals designed to clean the fabric. In any case, if you’re considering using one of these items, it’s a good idea to give it a try in a non-obtrusive place like the back of your office chair first.

Don’t just slather the entire seat of your office chair in stain remover. Instead, you should try it out in a hidden spot where no one will be looking. You can observe the effect the product has on your desk chair in this way. One place to test a product for eliminating stains is under the seat of an office chair. Although we certainly hope it doesn’t, even if the product does leave a permanent stain, it won’t be noticeable.

You should always perform a spot test before using any product on your office chair, whether it be a store-bought solution or a natural stain remover like vinegar. If the fabric of your office chair is not damaged or altered in any way, you can move on to using the product elsewhere.

Apply Conditioner to Leather

Condition your leather office chair once every few months to keep it from cracking and drying out. Full grain, rectified grain, and split are all examples of the various leather varieties. The greatest quality leather is full grain, and the next best is rectified grain. Natural leather, in all its forms, has a porous surface that absorbs and retains moisture.

The surface of genuine leather is riddled with tiny holes that can only be seen with a microscope. These voids, also called pores, are what maintain the leather’s moisture. If you sit in a leather office chair and it starts to become damp, the moisture will absorb into the leather and prevent it from drying out. But eventually, the pores will dry out as the moisture evaporates. If this isn’t fixed, the leather will eventually crack open and peel.

Applying a leather conditioner before use is the best way to keep your office chair looking and feeling like new for as long as possible. Leather can be conditioned with products like mink oil and saddle soap, both of which are formulated to replenish the leather’s natural oils. Leather can be hydrated and protected from dryness-related damage thanks to the water and other chemicals they contain. You can prevent your leather office chair from drying out by conditioning it regularly.

More advice on taking care of the leather desk chair:

  • Please be mindful of your leather office chair and avoid spilling any drinks or other liquids on it.
  • The ideal humidity level for your office is between 40 and 55 percent. Your leather office chair may crack if the relative humidity is below 40%. Conversely, if it’s over 55%, it could get overly saturated with water.
  • You shouldn’t condition your leather office chair more more than once every several months. Too much treatment might cause leather to become overly soaked.
  • A leather protectant may be useful, so keep that in mind. Different from conditioners, leather protectants work to fortify the material’s outermost layer.
  • Never put your leather office chair in front of a radiator or vent as this could damage the material.

Clean and Lubricate Casters

Keep the wheels of your office chair turning easily by regularly cleaning and greasing them. The wheels on an office chair are installed inside of housing sections called casters. The wheels can be found in a wide range of materials, from plastic and rubber to steel and aluminum to cast iron and polyurethane. On the other hand, the actual dwelling units are virtually invariably metal.

These days, most brand-new office chairs roll with minimal effort and ease. The casters on an office chair might get clogged with dust and other dirt after being used for a year or more.

Have a question about Patio Festival Swivel Metal Outdoor Lounge Chair with Beige Cushions? - Pg 1 - The Home Depot

Turn your chair upside down and remove any lint, hair, or other dirt from the casters by pulling on the wheel housing sections. A vacuum cleaner can be used to remove any excess particles from the casters, and bottled air can be used to replace the force of a vacuum.

Apply some WD-40 or other lubrication to the casters of your office chair after you’ve cleaned them properly. To make your office chair glide more easily, simply spray some lubricant into each housing unit. At least once every six months, you should clean and lubricate the casters of your office chair.

Tighten Fasteners

Obviously, you also need to check the bolts on your office chair and make sure they are secure. If you don’t regularly check and tighten the screws or bolts (or both) that hold together your office chair, it’s possible that they could become dislodged and cause you serious injury. A wobbly chair is the result of a missing or loosened fastening on your office chair.

The location of all fasteners may be found in the user handbook. Some office chairs contain a handful of attachment points, while others have dozens. Find the screws holding your office chair together, then use a screwdriver to ensure a secure fit.

Turn the screwdriver to the right to snug down a bolt. But if you turn a fastener to the left, you can undo it. The phrase “righty-tighty, lefty-loosey” can be used to quickly and easily remember which way to turn a fastener.

Replace Gas Cylinder

When you raise your chair, does it immediately return to the floor? If this is the case, the gas cylinder may need to be replaced. Pneumatic lift is generated by a gas cylinder in most height-adjustable office chairs. This cylinder contains pressurized nitrogen gas that is capable of lifting and maintaining the raised position of the office chair.

Your office chair’s gas cylinder won’t work properly or at all if it’s leaking. The good news is that most gas cylinders are readily available for replacement. Put your office chair on its back, remove the gas cylinder using a screwdriver, and replace it with a new one of the same size and type. After the new gas cylinder has been placed, you can test its functionality by lifting your desk chair.

Keep Away From Direct Sunlight

Direct sunlight can be harmful to upholstery, so move your office chair out of the way if possible. Many office chairs are made from materials that decay quickly when exposed to ultraviolet (UV) radiation. This is not something that can be accomplished instantly. An office chair may discolor and dry out if left in the sun for too long.

Your office chair can be shielded from the sun’s harmful rays without forcing you to operate in total darkness. It is recommended that you move your desk chair to a spot that will be primarily shaded throughout the day. The quantity of sunlight that reaches your office chair can also be reduced by partially closing the blinds or drapes. The sun can fade and dry out your office chair, but if you take these steps, you won’t have to worry about it.

Replace When Necessary

Your office chair may need to be replaced no matter how often you clean and repair it. One study found that an office chair had a lifespan of seven to fifteen years. In the event that your office chair is broken or worn beyond repair, you should get a new one.

A warranty is a must-have for any high-quality office chair. It is the responsibility of the manufacturer to fix or replace any defective parts throughout the warranty term. If the manufacturer is confidence in their office chair, they will offer a warranty.

However, after you’ve purchased a new office chair, it’s important to keep it in good condition. Doing so will prevent its breakdown before its time. On the other hand, if you keep your office chair in good condition, it will significantly enhance your working comfort.


Both the construction and upkeep of a lawn swing chair are covered in this article. Read the piece and give us your feedback, okay?