How To Make Candle Wicks From Cotton Balls? Step by Step Instructions

Helen Skeates
Helen Skeates
33 min read

Make your own candle wicks from of things you already have around the house if you’d like. We’ll show you how to produce cotton ball wicks in this article. It may be difficult to follow these procedures, so be careful!


How To Make Candle Wicks From Cotton Balls

Step #1: Turning your Cotton Balls into Cotton Strings

Cotton balls can be used to make yarn. Learn a new skill and acquire independence while impressing your friends. When it comes to spinning fiber, these concepts can be applied to any type of material.

You can experiment with dyeing the cotton at a later time to make a yarn that is uniquely yours. Let go of the cotton bag. Take out a handful of balls at a time, one at a time.

How To Make Cotton Wicks By Hand At Home - YouTube

Cotton balls can be used as a buffer between the brush bristles as you brush them together. Cotton is “carded” in this process. Look at the cotton for a moment.

As you brush, the threads will straighten and the cotton will expand. As needed, keep adding cotton balls until the wad is as wide as the brushes. Brush the strands until they are all moving in the same direction and then let them dry.

Make sure the cotton is ready to be spun. Using your palms, twist and pull the tip of the final wad. The beginning of the yarn should be here. It’s time to make a 9-inch-long piece.

Start by making a spindle. Put nine rubber bands around the pencil in a single bundle. Making the rubber bands as big as possible while keeping them attached to the pencil at the same time.

Put this group in the bottom third of the pencil. Apply a rubber band wad to the two CDs/DVDs. Apply more rubber bands if the wad is too small.

In order to begin spinning, insert the cotton into the spindle one at a time. To protect your CDs and DVDs, use the twisted tip of a large cotton wad and attach it to the pencil on the short side. Completely round the disk with cotton thread from the disk’s edge to the pencil’s point.

A loop can be formed by twisting the strand just above the pencil in this way: Attach the pencil’s loop to it. The bottom end of the pencil can be held in a bowl or suspended in the air as the rest of it spins.

To make the process of stretching and twisting the cotton strands easier, this technique is employed. Once the fibers have been spun, they will be turned into yarn. Unhook the loop from the spindle’s end when you’re satisfied with the strand.

Spin the spindle by wrapping the yarn around the spindle and twisting a new loop at the top. Repeat the process. Dog brushes have also been used to card cotton and other fibers.

Some people will benefit from this, but it will eventually wear out. It will be too thin if the fibers are spread too widely. You can get an even yarn by twisting and tugging the thread consistently.

The end of your cotton wad can be grafted onto the end of another wad. This should be done during the spinning stage. Twist the strands together by pulling them apart and twisting them together.

Step #2: Turning your Cotton Strings into Candle Wick

Use only cotton thread for the best results. For a longer-lasting flame, soak the twine in a solution of water, salt, and boric acid for 10 minutes. It is possible to make wicks without using this solution, but they may burn faster and may cause uneven melting of the candle wax.

Determine the wick’s diameter and length. If you’re using a really large candle, though, you’ll want to use three braided wicks instead of just one. Larger candles may necessitate the use of two or three braided wicks spaced apart to provide an uniform burn.

For a single wick, measure and cut the rope three inches longer than the candle’s height. You could braid a wick, but how would you go about it? Three equal lengths of twine should be cut four inches longer than the candle’s height.

When the candle is finished, you can trim the wick to the desired length. On the other hand, you’re less likely to get one that’s too short this way. Warm water, salt, and boric acid powder should be combined in a mixing bowl and whisked to dissolve.

If you have more than eight hours, soak the twine lengths in the solution. Make sure to thoroughly dry any remaining string before using. To expedite the drying process, place the wicks on a hook or a hanger.

The white crystals that form on the wicks as they dry are perfectly harmless. However, if you want, you can simply brush them off. Use a double boiler to slowly melt a portion of your wax of choice.

You’ll need enough to cover your strings/braid, and any surplus wax can be remelted the next time you need to make fresh wicks. Approximately a minute of soaking is all that is needed to coat the twine. A longer soaking time is not necessary because the twine does not “absorb” the wax.

To prevent burning your fingers, use tongs to remove the string from the wax. Hang it to cool after letting it drip for a few seconds to remove excess wax. During the cooling and solidification process, you can carefully straighten the wick by hand.

When the wax hardens, it will be perfectly straight. The wax should be allowed to cure and solidify for a few minutes. A wick tab can be added to the bottom of your wick if you choose.

Use needle-nose pliers to crimp it after it’s been threaded through the central aperture. Make sure that the finished wicks are kept in a cold, dry place. You’re all set now!

Can You Use Cotton Yarn As a Candle Wick?

Candles have always been an important source of light in our homes, whether or not we have electricity. Even for purely aesthetic reasons, we occasionally employ it.

The best part is that you don’t have to pay anyone to produce your candle for you. However, you’ll need to select on the type of wick you’ll use in your candles.

Is yarn something you’re considering? If this is the case, don’t worry. We’ll examine whether or not you can make a candle wick out of yarn in this post.

Is it Possible to Use Cotton Yarn as a Candle Wick?

The wick, as you can see, is a critical component of a candle that produces a beautiful flame. As a result, the wick must be made from a high-quality substance.

A wick made entirely of cotton would seem to be ideal. That’s great. The wick of a candle can be made from cotton yarn. Aside from the fact that cotton yarn does not contain dangerous chemicals, it is an ideal material for candle wicks. Using yarn as a candle wick should result in a wonderful burning experience.

You must, however, use 100% cotton thread when making a candle wick out of yarn. Additionally, make sure the yarn is dye and bleach-free.

When the cotton thread is saturated with water, boric acid, and a salt-based solution, you can then remove it. Your wick develops stronger and burns more steadily this way.

You’ll also need a yarn wick that’s six inches longer than the candle. Candles burn better this way.

What Does a Candle Wick Do?

It’s important to understand the purpose of a candle wick before making any purchasing decisions.

Candles have a wick in the middle, which is a long, thin string. The candle’s flames are not produced by the wick, despite popular belief. When you fire a wick, the candle wax is melted and vaporized. The flame is ignited and maintained by vapor.

Even yet, a candle’s wick is an essential component. Your candle would go out if it didn’t have it. The flames are held in place by your wick. What initiates the illumination process, in other words.

How Do You Make a Candle Wick Last Longer?

Wicks on candles often go out. When they do, the candle will be out. A candle should be used for as long as feasible, however.

To learn more, read Can You Make Candles Out of Wax Melts? 7 Ingenious Ways to Repurpose Old Wax Melts

So, you’re trying to figure out a way to make your candle wick last as long as possible. The following are a few examples of how you can accomplish this goal.

1. Trim the Wick Frequently

Trimming your candle wick on a regular basis is a good idea. The longer the wick, the faster the candle will burn out. After lighting the candle, be sure to trim the wick to the proper length.

The wick of the candle should be no longer than 1/8 inch in length. In addition to making it last longer, trimming will help to prevent black smoke from accumulating.

2. Do Not Put Candles in the Way of Air Currents

Avoid placing your candle in the path of air conditioners, fans, or other mechanical devices that move air. The wick of the candle can become damaged if there is too much air in it. The candle will burn more quickly as the wick grows longer.

In other words, stay away from the wind.

3. Burn a New Candle for at Least 2 Hours

If you obtain a new candle, do not burn it for a short length of time. The diameter of a fresh candle should determine how long it burns for the first time.

Candles should burn for at least an hour per inch before you throw them out. Burning for a short period of time will result in uneven wicking of the wax. A candle tunnel is the most common outcome of this circumstance.

The wick will be below the wax, and the wax will not burn with a candle tunnel. This will shorten the life of the candle. On the other hand, if the candle is burned for a reasonable amount of time, the wax will be evenly distributed. As a result, the life of your wick is prolonged.

4. Prevent the Wax from Rubble

The uneven burning of your bundle is usually caused by placing rubble close to your candle. Your candle burns faster as a result of all the dirt and matchsticks.

When your candle is clean and devoid of dirt, on the other hand, it will burn evenly. This, in turn, extends the life of your candle wick.

5. Do Not Burn the Candle for Too Long

An unmanageable amount of time should not be allowed for the candle to burn. After four hours of burning, it’s best to put the candle out.

However, you must let your candle cool for at least two hours before turning it off. You can prevent carbon from interacting with the wick this way.

This, in turn, slows down the burning of your candle. This is because the wick of your candle may become uneven and overheat if carbon comes into contact with it.

What Candle Wax Lasts the Longest?

The quality of the wax is critical in the creation of an excellent candle. Candle wax can be made from a variety of substances. Some of them include paraffin wax, beeswax and palm oil as well as gel candles made from the latter.

As a result, beeswax is by far the longest-lasting candle wax.

Honeybees produce the wax that bears the term “beeswax” on it. A superior candle wax, it is made from 100 percent natural ingredients. It’s also environmentally beneficial. Beeswax, on the other hand, does not generate a noxious odor.

If you’ve ever wondered why beeswax lasts for so long, the answer is simple. For one thing, it has a melting temperature above 2,000 degrees Fahrenheit and is quite dense. The melting point of beeswax is 149°F. As a result of this melting point, it burns the brightest.

See also: What Causes the Blackening of My Candle Jar? You’ll also learn how to avoid it.

Beeswax is dense, which means that it burns more slowly and produces less dripping wax. The qualities of beeswax remain the same no matter where the beeswax comes from. However, owing of its high melting point, beeswax may be difficult to make.

It is also possible to use soy wax, which is a long-lasting wax composition. Unlike beeswax, it is relatively easy and inexpensive to make. Soy wax is a 100% natural wax, as well. It’s made from environmentally friendly hydrogenated soybean oil.

How Do You Make Candles Burn Slower?

It’s always difficult to watch your candle go out completely. If this occurs, you may have no choice except to replace it. However, there are a few simple methods to extend the life of your candle.

1. Put Your Candle in a Freezer to Toughen the Wax

When the wax is hard, the candle burns more slowly. To solidify the wax, it is best to store candles in the refrigerator. Refrigeration takes a day or two, whereas freezing takes 2-8 hours. Thickness plays a big role in how long it takes to chill in the fridge.

2. Trimming the Candle Wick for Longer Burn

A candle burns more slowly with shorter wicks. Trim the wick when the wick and wax have cooled down to keep the wick shorter. The most common length recommendation is 1/8 inch.

3. Correct the Wick’s Position Whenever It Moves Out of Place

Whenever the wick begins to bend or get crooked, it should be straightened. The candle may burn unevenly if the wick is bent during burning. In addition, this could cause your candle to burn quickly.

As a result, make careful to adjust your wick whenever it bends. When it’s cooler, you can do it.

4. Add Table Salt to the Wax

Salt can be sprinkled around the candle’s melted wax after the flames have been extinguished. The candle’s melting pace will be slowed as a result of this. Applying salt before the wax hardens is critical.

How to Make Candle Wicks Stand up?

Every time a candle is lit, the wick bends slightly. It is common knowledge that bending the candle might cause it to burn unevenly. The wick of the candle must be adjusted and straightened if this occurs.

When the candle is uneven, repeating this method can be a challenge. The good news is… The wick of a candle can be made to stand and remain upright in a variety of ways. Using a candle in a variety of ways opens up a variety of possibilities.

How To Make Candle Wicks From Cotton Balls - Krostrade

If you’re using a votive, you might want to utilize the wick pin. The wick pin secures the wick to the candle’s body. Allows for the addition of additional types of wicks to the candle.

Votive candles can also benefit from the usage of wick clips. You can use these clips to hold your candle’s wick in place as it burns.

Glue can be used to hold the wick in place for jar candles. A wick bar can also be used to keep the wick in shape at the top of the pillar.

Trimming the candle on a regular basis is also a good idea. Shorter wicks are more likely to stand straighter. The candle’s wax and wick will burn more efficiently if you keep debris out of it.

Also see: Can a Toothpick Be Used as a Candle Wick? (Also, Creative Candle Wax Applications)

What to Do with the Candle When the Wick is Gone?

Are you left with nothing to do with your candle once the wick is extinguished? When all that’s left of your candle is wax, this question inevitably occurs. Candles are commonly believed to be discarded during this period by the general public. You can use your candle in a variety of ways, however. Candle wax can be used in a variety of ways, as listed below.

1. Make a New Wick

It is possible to re-wick a candle if the original wick is completely depleted. Mold the melted candle wax around a wick in a container by holding the wick in place. When the wick forms, your candle is ready to be used.

2. Make a New Candle

It’s simple to make a new candle. It’s as simple as melting the existing wax, adding additional wax if desired, and inserting the new wick.

3. Use the Wax for Other Purposes

If you don’t want to, you don’t have to make another candle. The wax can be used for a variety of other things. The wax can be used as an adhesive or lubricant after it has been melted.

4. Fire Starter

You can use your wax to start a fire. Adding it to your fireplace can create a wonderful aroma.

Which Other Items Can Be Used as a Candle Wick?

In order to make a candle wick, you can use several different materials. Homemade candles can be created from a variety of materials besides cotton, which is the most common. Inquire about the various options for wick material.

1. Wood

Wood is a popular substitute for cotton wick. It is possible to use toothpicks, which have already been processed, as wicks. Another option for a wick is to use tree twig twine. Because of its inherent ability to combust, wood is an excellent material for this project.

Soak the wood in olive oil to create a candle wick. While still holding the board in the center, pour the wax into a container.

2. Borax

Borax can also be used to produce candle wicks. Cleaning with borax, a white powder, is a common household cleaning practice. Borax wicks can be made by dissolving salt and borax in boiling water and then using the resulting solution.

To dry the twine, immerse it in the borax solution and let it sit for an hour or two. The finished product is a wick made of melted wax and string.

3. Butcher’s Twine

Candle wicks can be made using butcher’s string. A nice butcher’s string can be made by adding borax or just melting wax into the twine.

4. Paper

If you’re looking for an eco-friendly alternative to cotton wicks, paper is the way to go. Wicks can be made from any type of paper, from paper towels to newspapers. In order for the candle wax to adhere to the paper, it must be long and thick.

Wooden Wicks vs Cotton Wicks

Customers frequently ask us, “What’s the difference between the different wicks?” because we make both wooden and cotton wick candles. You can’t go wrong with carrying both types of candles; it allows you to have something for everyone. Using cotton vs. wooden wicks is a hot debate these days, and we thought we’d share our findings with you. Below, we’ll go through a few key differences.

To make candles, tiny slabs or tubes of wood called “wicks” are carved out specifically. Their crackling sound is lovely, but they require a little more attention and upkeep. Braided cotton strands are coated in wax and squeezed to retain their shape before being inserted into a wick. Candles with cotton wicks tend to be less expensive and easier to maintain.

Burning Wooden Wick and Cotton Wick Candles

Until get the greatest results with either wick, you should always burn your candles to a point when the wax has completely melted to both sides of the candle glass before extinguishing them.

To help you get the most out of your wooden wick candles, we’ve devoted an entire post to the subject.

the process of re-illuminating

On the first lighting, both wood and cotton wicks begin to glow. The wooden kind, on the other hand, will necessitate more attention and time during repeated burnings. Trimming the wick on a cotton candle makes it easy to ignite in three seconds, whereas trimming the wick on a wooden candle can take up to 20 seconds.

It may take two or three efforts to relight a wooden wick candle since the exterior, more burned layers of wood take longer to burn.

a battle of the lighters

This is one of the most significant differences between using a cotton wick candle and one with a hardwood wick candle that I’ve discovered.

Using a match to light a wooden wick candle is nearly difficult. The length of a match doesn’t provide enough flame or time to ignite a hardwood wick effectively, as we’ve discovered. Somewhat inefficient even are fireplace matches. In order to keep the flame for as long as you need, the wooden wick will accumulate a great deal of burnt match ash, making the candle wax a potential fire risk.

If you’re planning to buy a wooden wick candle, we always suggest getting a stick lighter. You’ll also be saving your poor burned fingertips!

With a match, cotton wicks are significantly easier to light. There is enough length on even the smallest matches to ignite an unbleached cotton wick candle.

If you want to extend the life of your candle in an outdoor situation, we always recommend using a hurricane glass. Pictures courtesy of T2 Photography

Drafts and Wind Flows

If there’s even a slight breeze, either sort of wick will have trouble keeping its flame up. Burning a candle in a drafty room or in the open air increases the amount of smoke and soot produced by the erratic flame.

It’s not recommended to use wooden wicks in drafty areas or outside because of the risk of them going out and the difficulty of relighting them.

Outdoors, cotton wicks perform better, but they’ll continue to burn more erratically and at a higher rate.

Are There Differences in Scent Throw?

When burning, we’ve discovered that candles with hardwood wicks provide more fragrance. It’s possible that the smoldering wick of the candle is to blame. For cotton-wick candles, this helps keep the wax around the wick warm rather than just burning it out rapidly with a high flame.

Your wax’s precious scents will be swiftly consumed by a higher flame when using cotton wick candles. Because of the intensity of this or the amount of time you’ve left your candle burning, you can realize that following burns actually have less aroma. You should continue to trim your wicks to 14″ as instructed on most candle warning labels and to burn in 1-2 hour increments. This is an excellent explanation.

Despite its slower and lower burning time, a wooden wick candle will heat up your perfumes and disperse them into your room more quickly, even though it burns more slowly.

Wooden Wick vs Cotton Wick Maintenance

If you want to get the most out of your candles and reduce the amount of soot and smoke they produce, you’ll need to do some minor maintenance every now and then.

There is more upkeep required for wooden wick candles, but they are worth it if you can get your hands on one like this one, which is our favorite wooden wick candle.

Keeping Your Wooden Wicks Burning Properly

The possibility of the flame going out before the candle has had a chance to burn down is one of the reasons we believe wooden wick candles require greater upkeep. To ensure a smooth, even coating of melted wax over the entire jar, make sure your candle burns for at least eight hours. That way, you’ll get the most value out of your candle purchase, and you won’t end up with a tunnel in the middle of your wax from a subsequent burn.

Due to the larger chance of losing your flame in a wooden wick candle, this stage takes a higher level of care.

You may see a tunneling effect if your candle burns out, like the one described above. The only practical solution is to scrape away the excess ridges of un-melted and wasted wax in order to restore your candle back to its original height.

Cotton wick candles, of course, are also susceptible to this problem. A candle with a wooden wick, on the other hand, is more likely to suffer the same fate. This is our most popular cotton wick candle, and we constantly have it burning in our studio!

cutting the wicks

In most cases, you can find trimming instructions on the bottom of your candle’s caution label. Your wick should always be kept at a consistent 1/8″ inch for the best possible performance.

It’s always a good idea to light your candle for 1-2 hours and check on how your wick is going because some candles burn faster or consume candle wax at various rates.

Wooden wick candles and cotton wick candles both benefit from a wick height of around a quarter inch. Trimming, on the other hand, can vary from person to person.

In order to reduce flame size, smoke output, and soot accumulation, it is necessary to trim wooden wicks at their uppermost point where the wick appears to be splitting apart from its center. Despite this, reducing your wick will make it more difficult to start a fire, making it less likely that your candle will burn properly. For this stage, you can either use nail clippers or your fingers as a guide.

Cut the burnt end of the cotton wick by pinching the brittle highest part. A pair of Wick Trimmers is a great option if you’d want to keep your hands clean while trimming the wick. Your candle’s life will be lengthened (in terms of total burn hours) as a result of this technique’s reduced flame height and smoke emission.

Which Wick is More Versatile

Cotton wicks offer SO MUCH MORE flexibility if you produce candles. Tests of your fragrance compositions are simple, and changes to the vessel’s wick size largely involve changing the wick’s diameter.

When it comes to testing wooden wicks for your candles, however, they can be absolutely stunning with incredible ambiance and shelf appeal, as well as extra value!!!

Some Wood Wicks are made in batches that are different from one other.

The density and thickness of wood wicks might vary somewhat from batch to batch, and this can result in candles that are difficult to relight, troubleshoot, and extinguish properly for the end user.

It takes a lot of trials and errors to get the right wick size for each new perfume mix, and it’s no different with wooden wicks. Because of the lack of flexibility or ridiculous rigidity, you can easily identify if your smell and wax recipe is compatible with that particular batch of wax and wicks by looking at their wicks.

Use in the Open vs. Use Inside

If you plan on producing or burning candles outside, cotton wicks are the best option because they are more versatile than other types of wicks.

The Container’s Size and Diameter

For the most part, both cotton and wooden wicks function well. What matters most is that your candle burns smoothly on all sides, that the flame isn’t too small or too large, and that there are enough wicks to fill the container.

Which Wick Burns Longer

Candles made with wood wicks burn longer because they produce lower, simmering flames that devour the wax more slowly. When it comes to how long a candle burns, it all comes down to how much wick it has, how well it’s burned, and how well it’s been trimmed.

Wooden or cotton multi-wick candles burn more quickly per unit volume than single-wick candles with a single central wick, regardless of the number of wicks.

How to make cotton Vaat for diya / lampwick at home? - YouTube

The wax that accumulates at the bottom of a burning candle holder.

The amount of wax left in the bottom of your candle container after you’ve used every last bit of wick should also be taken into consideration, because it can provide a lot of information.

It is necessary to use a larger wick support for candles with wooden wicks to keep the wick straight and in the middle. Compared to the standard wick stand in cotton-wick candles, this wick stand is double the height of a conventional one

Wooden wicks can only eat up to 1/4′′ of wax below the wick support, according to our research. When a cotton wick candle reaches the end of its useful life, it will be nearly clean at the base.

Which Wick is More Sustainable

Wooden wicks are more environmentally friendly because they are more visible.

The Longevity of the Wooden Candleholder

There are numerous makers and distributors of wooden wicks. We had a hard time deciding on a line because every provider seemed to have something absolutely unique. A multi-ply super wick is created by gluing together numerous wooden wicks. Some people use accelerants to wet their wood before burning it.

As a result of our research, we’ve discovered that it is impossible to tell if the glues or accelerants used in burning candles are safe for people to inhale. You can get FSC-certified, unprocessed wood wicks from a terrific supplier, and they plant a tree for every $100 you spend. Note that this article has not been paid for by this company, nor has it been sponsored in any manner. We genuinely care about their objective and want you to find the greatest environmentally friendly hardwood wick.)

Cotton as a Source of Long-Term Energy

Cotton candle wicks made from organic or sustainably derived materials are more harder to come by.

For a’self-trimming’ property, some businesses add zinc or lead to their braided wicks; as a result, the wick requires very little trimming throughout the course of a candle’s lifespan.

Paraffin wax-dipped cotton wicks are also available from some manufacturers. See our Parafin vs. soy wax comparison blog here.. While the quantity of paraffin that makes its way into your candle and into the air may be negligible, it’s still worth mentioning.

Third choice: if you don’t like wooden wicks and cotton wicks, there is a third option. Hemp wicks made from organic hemp are now available in stores. Although we haven’t tried this sort of wick, it could be a terrific alternative for those who are searching for an all-natural candle or those who want to experiment with something different.

You may have guessed by now that I prefer candles with cotton wicks to candles with wooden wicks.

After all is said and done, my personal preference is for wooden wick candles. The richness and purity of the fragrance, the delightful crackling sound, and the availability of environmentally friendly and sustainably sourced materials all combine to make oak wicks one of my favorite candlemaking components. In the appropriate atmosphere, over the right period of time, and with good wick trimming, they are absolutely worth it.

Choosing a candle for your home shouldn’t be based solely on the wick type. The type of wax used, the pricing, and the general quality of the candle should all be considered while making your purchase decision.

Candles labeled with any or all of the following characteristics should be sought out:

  • possibly a mixture of soy and coconut wax
  • free of phthalates
  • non-toxic
  • Shop for wicks that say “lead and zinc-free” if they’re cotton.


Can you use cotton balls for a candle wick?

For DIY candle wicks, you only need cotton string! You can use oil or salt to make your own candle wicks, but you can also use plain cotton string as a wick.

What can I use as a homemade candle wick?

In order to make your own wicks, you can use anything that is made of natural fibers like cotton such as twisted toilet paper or paper towels. You can also use cardboard, twine, string, and cotton balls. In a pinch, even tampons can be useful. The object itself serves as a wick for the following candles.

Can I use a toothpick as a candle wick?

Yes, you can use a toothpick as a candle wick, as you ask.

Can you use spaghetti as a wick?

There’s no need to sacrifice your favorite aroma if your candles are burning too low to reach the wick. Light a piece of uncooked spaghetti instead of your fingers. Grandpa’s birthday cake candles will be lit thanks to this long-lasting candle!

Can I use yarn as a candle wick?

You might try any of these cotton yarns if you’re seeking for a suitable wick for your homemade candle. Cotton yarn or twine is fine, but most wicks are braided together to create a stronger wick that burns more efficiently and lasts longer.

Can you use a cinnamon stick as a candle wick?

Start by chopping your cinnamon sticks in half and then breaking them into smaller pieces with your hands. The bottom of the candle should be completely covered by the wax from these. Place them how you see fit around the wick at the bottom, taking care not to move it too far from the center.

Do you light all 3 wicks?

The first burn should be done with all three wicks, but for subsequent burns, switch between the wicks to keep the wax level more or less uniform across the candle’s surface.

Conclusion on How to Make Candle Wicks from Cotton Balls

To learn how to produce candle wicks out of cotton balls, follow these two steps. Make sure you take your time with the first step. Candlewicks are easy to make once you learn how! Visit our website for more articles on candles.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.