How to Make Low Rise Jeans Into High Waisted? Special Tips and Tricks

When it comes to women’s health, what works for one woman may not work for another. What if all you have is a pair of jeans that don’t look well on your body? Then a change is necessary. You, not some super-slim model, should alter those jeans.

Make your low-rise jeans high waisted with these easy tips. There’s a better way to accomplish your goals with this adjustment. Make use of a sloper to help you achieve your ideal waist size. If your jeans have darts, the sloper’s pattern will be able to fit them as well. In order to get the job done, all you need to do is trace or overlay and mix.

Take a look at our guide if you want to learn how to turn your low-rise jeans into high-waisted ones. This article will teach you everything you need to know to complete the project on your own, without needing to pay someone else to do it for you.

How to Make Low Rise Jeans Into High Waisted

With a little work and a good pair of scissors, you can transform your low-rise jeans into a pair of high-rise shorts. You’ll need need a pair of old jeans, some sewing machine buttons, and a pair of scissors to get started.

The first step is to cut the jeans in half and then create a cut-out on the leg where you want the shorts to terminate. A straight line can only be achieved if the complete length and length of your jeans are covered.

As a second step, cut your jeans at their cut line, making sure that both legs are the same length. Don’t get rid of the material just yet. It’s still useful. Eventually, you’ll need to put it to good use again.

Using your hips as a starting point, measure the diameter and the height of your waist. The raw edge of the cut-off piece of your previous pair of jeans may need to be sewn or covered to ensure a clean finish at the top and bottom.

If you’re going to wear the cut-off jean leg section around your waist, you’ll want to sew it over the low-rise jean waistband. Remove the belt loops, but do not remove the zipper button from the pants.

Buttons and buttonholes must be positioned in accordance with your preferred closure method in Step 5. To guarantee a proper fit, make sure that all of the seams are sewn together properly.

If you want a stylish pair of high-rise shorts, strive to harmonize the lines. A sweater or blouse can be worn over them to hide the hard labor. It’s up to you.

Turn Low Rise Jeans Into High Rise

Make a few measurements from the high-rise jeans or pants you already own to get the greatest fit. Using these measures, you can switch from low-rise to high-rise jeans in a jiffy.

Crotch stitching is the most important place to measure. Having that measurement will allow for all the various adjustments you’ll need to make to your pattern.

The yoke on the same pair of pants, as well as your low-rise jeans, are next on your list. So, you’ll have to modify the yoke of the low-rise jeans in accordance with how much you’re putting in.

At some moment, you’re likely to have to make a decision about the zipper. It is possible to convert your altered jeans by adding buttons to the waist, but this will require the addition of buttonholes up to the waist and down.

You’ll probably have to decide on the zipper at some point. Buttons can be added to the waist of your changed jeans to complete the transformation, but buttonholes must be added up and down the jeans’ whole length.

What you do with it and how you look when you wear the new pair of jeans will depend on you and your own personal style. Your new pair of jeans will have a lot to do with it. Remove any previous belt loops, as the extra fabric will obstruct them.

Making Low Rise Jeans Higher

The differentiation between the rises is one of the most critical elements to take into account. If the rise is merely 5 to 8 inches, you’re looking at a pair of low-rise jeans.

Jeans that merely rise between 3 and 5 inches will be excluded from this discussion. Between the hips and below the belly button, the low-ride jeans are worn. Wearing jeans with a low rise often results in ugly bulges for many women. Unfortunately, this can be avoided.

With a 12-inch rise, a pair of high-rise jeans sits a few inches over the belly button. Cutting your waist in half might also make them look a little boxy because they flatten your backside.

It’s essential that you deal with these issues if you plan on converting lower rise jeans into high rise ones. The rise might be anywhere from 7 to 4 inches. In order to avoid running out of clothes, make sure your closet is well-stocked.

In the event that you don’t want to get all the way to the top of your high-rise jeans, you can rest here. If you start with an 8-inch base, this will add one to four inches to your low rise measurement. If you begin with a pair of low-rise jeans that are even lower in rise, you might want to consider adding more.

Because they’re more likely to fall on your belly, mid-rise jeans are a wonderful choice for women. 8 to 12 inches is the average height of their growth. Make sure you pick a style that flatters your figure and suits your body type in whatever you decide to accomplish.

DIY Low Waist to High Waist Tips

If you want to go from high-rise to low-rise jeans, following the DIY methods is far easier than doing it the other way around. We’ve provided a DIY alternative above, and let’s face it although it’s effective and is extremely practical, it’s not an option that is widely used.

In order to switch from high-rise to low-rise jeans, DIY procedures are easier to follow than in the opposite direction. However, while it is a viable method that can be done at home and is incredibly practical, it isn’t generally employed.

Make careful to include the seam allowance when creating the design for the waistband. Your pattern will consist of three components when you’re finished. Zig-zag over the seams, crotch, and inner seams to create a zig-zag stitch effect.

Darts are also included. Assuming you’re going to have darts. When the seams are sewn, test the pants to see if they fit as you envisioned them. After you’ve had your pants fitted, sew the zipper to the waistband.

In this scenario, the sole word of caution is to avoid sewing too close to the zipper. To complete the process, all you have to do is tie your jeans.

Some Final Words

You may have reached a moment in your life where humility has replaced youthful energy and a casual attitude. Low-rise apparel can be re-evaluated and reworked into something more appealing and comfy at this point.

The best part is that you can easily make the switch from low-rise to high-rise jeans on your own. Before beginning any project, make certain that all measurements are exact.

The most important measurements to take into account are the rise, yoke, and waist circumference of your jeans. Jeans with a low rise can be easily altered by adding a few buttons and a sliver of fabric to the waistband; however, the outcome may not be what you had hoped for.

Make sure you merge your lines and put on the right buttons to retain the look of your jeans as you would like them to be.