When it comes to fashion, sometimes the name doesn’t quite reflect the look. If you don’t, you’ll be forced to explain what a cowl neck actually means.
Examining the seam is a crucial first step. A seam ripper may be all that is needed to remove the cowl from the seam without damaging the rest of the fabric. If you don’t, you’ll need to leave at least a half-inch of fabric for a fresh seam.
Learn more about cowl necks and how to remove them by reading our article further down in the page. If you wish to edit any sweater that includes a label, this is where you’ll find the details you need. Cowl necks, despite their odd moniker, are beautiful.
What is a Cowl Neckline?
This style of neckline, in the opinion of some, is a waste of fabric. As the cowl neckline does contain a lot of cloth around the collar area that drapes below your collar bone, they may be correct in their assessment. Although the term “drapes” may be preferred by some, it is all relative.
In fact, this style of neckline is not unique to turtleneck sweaters; it may be found on both long and short-sleeved versions, and it can be made from both natural and synthetic fabrics. Wool, angora, and cashmere are better choices than cotton or linen for this.
Oftentimes, this neckline design is used in conjunction with particularly fitting sweaters, which means that there are regions of the garment that help accentuate and shape fit to your figure.
It’s possible to utilize the back of this sweater as a hood when the weather gets a little cooler because of the amount of cloth used to create this neckline. Depending on the purpose, this style can either disguise or emphasize a woman’s physique. Both functions benefit greatly from the added bulk.
When you’re not ready to show off your baby bump, this is a great option.
How to Change a Cowl Neckline
You can alter the appearance of this type of neckline design in a variety of ways. As a first step, you can simply snip away some cloth and transform the sweater from a turtleneck to a scoop neck or something different.
As part of the process of doing this correctly, you must first evaluate the seam to see if you can just cut the excess material off or leave a seam allowance so that the neckline may be folded over.
A sharp pair of scissors and meticulous measurements are all that is needed to get the job done. Before sewing a running blanket stitch to hold the seam in place, leave enough material to fold the seam allowance in half twice.
This option is all there is to it. Maintaining the sweater’s integrity while changing its appearance is quick, straightforward, and incredibly simple. The second approach is a little more involved, and your bust line will have a role in the final results.
The second is the medium via which you affect the first. Make a muslin copy beforehand so that you may adjust the style if it doesn’t fit you properly. This is highly advised.
In order to lower the front drop, you’ll first need to draw a slash line at around a 90-degree angle from the side seam. Bring it up to your bust point.
Once you’ve finished cutting the first slash line, go back to the bust point location and make a second slash line that’s 90 degrees from the first. In order for the drop to be more modest, you need to have this second slash line extend past your shoulder neckline.
Ensure that the armhole/side seam juncture has a hinge before cutting along the slash lines. To lessen the front neck drop, overlap the pattern sections and then rework the cut lines to achieve a clean finish. You must maintain a 90-degree angle on the CF/facing edge during this entire process.
That is the sum total of the matter.
How to Remove a Cowl Neck From a Sweater
Sewing this is going to be one of the simplest things you’ve ever had to do. You don’t have to worry about lengthy directions, fashion moves, or difficult sewing. This procedure, however, is a great way to get rid of the extra material and transform your turtleneck into a crew neck sweatshirt.
The turtleneck sweater must first be turned inside out. That will reveal the sweater’s seams and reveal how it was put together. Most turtlenecks are knitted separately and then sewed together to form a single sweater, as is the case with this particular one.
We’ve now reached the second stage of the process. Remove the cowl neckline by snipping the threads or stitches that hold it in place. To separate the two pieces of knitted cloth, you may need to pull out a bit of yarn.
In the third and last step, you must make a decision. You can stop there and wear your freshly made sweater if you like the distressed look. If you want to give your sweater a polished look, you can sew a seam.
The next step is rolling the hem and pinning it, if you desire to continue. Pin the roll close to the edge of the sweater’s interior before rolling it up. The new edge should be hand-stitched with a strong thread to prevent any possible unraveling.
As soon as you finish sewing, your crew neckline should be neatly done up. You should keep the cut-off area of the turtleneck as a fantastic suggestion to follow.
You can wear it as an ear muff or a headband to jazz up your new sweater’s look. If you’re feeling a little more inventive, you could use it to construct little projects for your daughter’s dolls, for example.
How to Adjust a Cowl Neckline
No sewing or cutting is required in some cases to modify the cowl neck. Depending on how much cowl neck fabric you have, the length will vary greatly. Changing the shape of the material is all that is required.
Make a small hood out of the back portion to give it a new look. Just draw the material back and up over your head until you are completely covered. This method is simple, effective, and useful because it keeps you toasty warm.
Alternatively to cutting or sewing, you can just pull the cowl neck on either side at each end to secure it. Extend the material across both shoulders and hold it in place for a few seconds. An off-the-shoulder look can be achieved with a single pull of the cloth.
You don’t have to leave the house to change your appearance in these ways. As a bonus, it’s appropriate for an evening gown-type affair later in the day.
It’s also possible to wear the sweater as-is and not make any alterations at all. The cowl neck will take its own path and drape itself in whichever way it sees fit. Boat or off-the-shoulder styles may require frequent readjusting of the material due to the tendency of cowl necks not to stay in place for long periods of time.
Depending on your preferences, some of these options may result in many folds, which is useful if you’re attempting to conceal something and aren’t quite ready to share the information just yet.
Altering a Cowl Neckline
This is actually one of the simpler aspects of sewing. It takes a little skill, a little experience with the fabric, and a little experience. As you can see, the non-sewing and non-cutting methods are very simple and do not need any of those three elements.
To be honest, this is one of the most straightforward components of sewing. How to do it? It’s not that difficult; it just requires some ability and practice. No sewing or cutting is required, as you can see from these ways that don’t use any of those three components.
Unless you are going for that avant-garde look that will turn people’s heads and have them scratching those heads trying to figure out how you could wear such a garment. it will take a little time to figure out how you want the cowl neckline to look.
Unless, of course, you’re striving for an avant-garde appearance that’ll make folks scratch their heads and wonder how you’re going to pull it off. it will take a little time to figure out how you want the cowl neckline to look.
Aside from the avant-garde look that will make people scratch their heads and wonder how you could ever wear such a clothing, this is a no-go. The cowl neckline will take some experimentation to get right.
How to Sew Cowl Neckline
Extra material that can be placed on the back of the sweater or bodice, as well as sleeves and the sides of a skirt or pair of pants can all be described as “cowls.”
As such, when discussing a cowl neckline, use the term “cowl neckline” to ensure that everyone understands what you are referring to. Once you’ve decided where you’re going to put it, you’ll need to make a second decision. In terms of design, how will it look?
There are a variety of ways to wear the fall, ranging from a subtle design to something more dramatic and provocative. You’ll then begin by drawing a new neckline. Ideally, it should be between 3 and 5 inches below your collarbones.
Draw a line from the shoulder point to the draping point on the pattern’s center front.
Make two slashes from the shoulder seam to the center point of your sleeve. Cut along your stitching but do not remove it. Include a hinge at the stitching line as well.
Then, transfer the pattern to a fresh sheet of tissue paper and tape together all of the individual parts. After that, draw your lines and the cowl line, being sure to retain the latter at a 90-degree angle from the shoulder point at the neck edge to the center front.
After your lines are drawn, cut the facing line and then fold along the cowl line. Finally, adjust the shoulder and armhole edges. Then check the side seam to see if it also needs some truing done to it. Don’t forget to check the hem edge as well.
Then cut along the facing line and fold over the cowl line. Finally, correct the shoulder and armhole edges. Make sure the side seams are also straightened out. Don’t forget to inspect the hem.
If you prefer, you can either finish the rear neck edge with a binding or a finishing technique.
As well as pinning the front-facing neckline to the back-facing neckline, pin the back shoulder to the front shoulder.
If you think you’ll need to add a little weight to the fabric for a better drape, you can add a small piece of fabric to the piece to hold the weight.
Some Final Words
Cowl necklines are either adored or loathed. Either they add a stylish touch or act as an eyesore due to their bulk. Get the look you want by removing, adjusting and removing as you choose.