How To Remove Mold From Bamboo? Bamboo Blinds and Bamboo Furniture

Helen Skeates
Helen Skeates
7 min read

Mold can be removed from bamboo by exposing it to the sun and then scrubbing as needed. Find out how to remove bamboo molds in the following section!

Bamboo Mold

A wide range of surfaces can be affected by mold, including bamboo. On the surface of bamboo canes, a fungus known as bamboo mold thrives.

How to Clean Mold From Bamboo Furniture | Hunker | Bamboo furniture, Fence decor, Furniture

From bamboo blinds to furniture, we’ll discuss how to remove mold in this post.

Causes Of Bamboo Mold

There is a strong correlation between water damage and the growth of mold in bamboo. Despite the heat or boron solution treatment, they are still susceptible to surface mold.


Surface mold develops on bamboos when they are transferred to climates that are significantly different from their native one. Cargo sweat is caused by a shift from humid and warm air to cooler air, which causes water damage.

In addition, extended travel (30 days or more) might lead to the growth of mold on bamboo. Condensation is the outcome of these changes, and mold growth is the result.


Molds can only grow if they have access to a food source. Their mold spores land on the bamboo’s carbohydrates and starch.

As a result of this, mold begins to grow. Here’s some information on how to reduce the amount of mold spores in the air during long-distance travel.


The presence of oxygen is also a factor in mold growth. With the exception of securely confined locations (such as caves), oxygen is readily available and this requirement is easily met.

Limiting the amount of oxygen reaching the bamboo can help keep mold at bay. However, if water penetrates into a building, mold will certainly grow.


Mold thrives in damp circumstances, as was previously noted. Water damage can be caused by moisture.

Mold is inevitable if you travel for a long period of time with a lot of moisture in the air.

Types Of Fungi That Attack Bamboo

Stain fungi

After removing the bamboo’s branches, this mold penetrates the circular bamboo. It’s common for stain fungi to appear as spots and streaks on the bamboo.

How to Repair and Restore a Bamboo Rocking Chair - Dengarden

Surface molds

The integrity of the bamboo is not compromised by the presence of these fungus. They are also rapidly gone.

Decay fungi

Fungi of this class are especially harmful to bamboo. It causes white rot, which can be difficult to notice in its early stages of degeneration.

The bamboo’s strength has already been weakened by the color change. The bamboo’s culm becomes mushy and powdery as the mold infection progresses.

Removing Mold From Bamboo Blinds

Mould can grow on bamboo blinds, just like it can on any other material or surface. Mold is more prone to grow on them if they are kept in bathrooms or kitchens.

You should therefore clean bamboo shades on a monthly basis. As a result, mold growth would be avoided.

Step 1: Extend the bamboo blinds as far as possible. Make sure they’re in a well-ventilated area after you remove them from the rest of the ingredients.

Clean the blinds with an old toothbrush after they’ve been laid flat. Dust, mold, and vermin can be removed by brushing the blinds.

Brush extra forcefully if the mold persists.

Step #2: Fill a bathtub three to four inches deep with warm water. Mix the warm water with two capfuls of anti-bacterial dishwashing liquid.

Submerge the bath blinds in water. Lift the blinds up and down for five minutes to remove any leftover dust.

Submerge a brush to remove any mold stains that may have formed.

Mold-killing solution should be drained before you add fresh water to your bath tub. Rinse the blinds by raising and lowering them in the water.

Save water by rinsing the blinds with the showerhead. Ask a friend or family member to keep the blind in place while you clean it.

Step #4: Drying your blinds is essential to preventing mold growth. You can use an old towel to soak up the water.

The breeze and the sun will help to dry it.

Tine K Home Bamboo Lounge Corner Module with Cushion | Grey | DECOVRY

Removing Mold From Bamboo Furniture

To get rid of mold on the bamboo furniture, place it in direct sunlight. Mold dies at a temperature of 68 degrees Fahrenheit.

After putting it outside, use a rag to remove the mold off the surface. Mold spots on furniture can be treated with vinegar.

Bleach or ammonia can be used as a more concentrated solution. They should never be combined.

Spray the mold-infested areas with the solution. After that, use a stiff brush to remove any remaining mold from the furniture’s joints and crevices.

In the third step, make sure not to oversaturate the mold-contaminated region with water by rinsing it thoroughly. It’s best to leave the furniture out in the sun to dry faster.

The greasy deposits can then be removed with turpentine. After applying turpentine, coat the furniture with polyurethane.

Turpentine can then be used to eliminate the oily buildup. Coat polyurethane on the piece of furniture after applying the turpentine.


Bamboo blinds and furnishings can become infested with mold if they are not properly cleaned. We sincerely hope that you found this article to be helpful and that you will return to it in the future as a resource.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.