How To Remove Mold From Inflatable Bounce House? Ultimate Guide

Helen Skeates
Helen Skeates
19 min read

Save your fun by learning how to remove mold from an inflatable bounce house. Before, during, and after eliminating mold, all you need to do is follow a three-step protocol.

While the subject of whether or not to obtain a mold check when purchasing a home is an important one, inspecting an inflatable bounce house is equally critical. When it comes to safety, there is only one difference between a real house versus an inflatable bounce house.

Now, prepare yourself because this might cause you physical exhaustion. Gather the materials you’ll need, and then proceed to the three-step cleaning method.

Nonetheless, the effort will pay off!

All About Inflatable Bounce House

Children and the young at heart alike benefit from the amusement provided by inflatable bounce houses. Despite this, molds have found a place in these homes, which they intend to use as their new home.

You might laugh when you hear this, but don’t let that deter you from treating it as a serious matter. Owning one is a significant financial commitment in and of itself.

Removing Mold & Mildew Stains From Water Slide - YouTube

Take good care of your investment if you don’t want it to go to waste. You’ll need the correct tools and equipment to get rid of mold in your inflatable bounce house.

Materials Necessary To Get Rid Of Molds

1. Cleaning agent

You’ll need a cleaning chemical to remove mold from an inflatable bounce house. It is, however, difficult to come by.

Listed below are a few household cleaning products you may like to consider. To learn more about how to use these products, simply click on the provided link.

  • Vinegar that has been distilled
  • Borax
  • Vinegar
  • Bleach

2. Water

There are two ways to make use of water. When it comes to the first one, you can use it in the same proportions as your other cleaning products.

3. Bristle brush

After you put or spray any cleaning agent mentioned above, you will be using a brush. Scrub the mold-infested area with a bristle brush.

4. Disinfectant

After removing all the molds, use a disinfectant to clean the area. Make sure your inflatable bounce house is clean on the inside and the outside.

3 Phases In Removing Mold

Mold removal is easy if you follow our step-by-step guide.

1. Before removing mold

The “dry-cleaning” is another term for this “before” stage.

Every aspect of your bounce house must be thoroughly inspected. Look for signs of wear and tear, such as rips and tears.

The most crucial thing to look for is mold. Make a list of all the things you think need to be addressed.

Look at the inflatable bounce house for as long as you need to. Take your time and don’t rush so that you don’t miss anything.

After a thorough inspection, you’ll need to get rid of any superfluous clutter. Take everything out of the inflatable bounce house and put it away.

2. While removing mold

The most critical step is removing all of the mold from the area. Changes will or won’t happen based on this.

Prepare all of the materials you were asked to have ready previously. Make sure everything, notably the vacuum cleaner, is easily accessible and out of harm’s way.

Take these simple methods to remove the mold.

Step #1. Apply the cleaning agent

Filling a spray bottle with the solution is a smart move. Spraying it on eliminates the need for physical contact and makes it easy to apply.

Do not proceed with the next step until you have waited for an hour.

Step #2. Scrub the mold

Scrub the mold with a bristle brush. Use all of your strength, but be careful not to ruin the bounce house in the process.

Remove any mold from contaminated places by scrubbing them over and over again. In the event that any mold remains, it will wreak havoc by re-expanding.

Step #3. Cleanse with water

Yes, wash the entire inflatable bounce house with water. Keep an eye out for places where mold thrives.

Mold spores and cleaning solution will be washed away during the cleaning process. To ensure that no one is harmed by the fragments, do so.

3. After removing mold

You’ve made it to the end of the second phase, so we’re crossing our fingers that you did.

Because water isn’t enough to eradicate all bacteria, disinfect the entire bounce house. Keep the area as dry as possible after cleaning to avoid the growth of mold.

How to Clean a Bounce House in 5 Easy Steps

Your kids will love it when their bounce house is clean and ready to go!

  • Take a broom to the bouncy house
  • Spray the area with a cleanser to remove the stains.
  • Use a softer brush to clean
  • To remove any remaining cleaner, simply rinse and pat dry.
  • Store the bounce house when it has been dried.

A residential bounce house may be cleaned in around 15 minutes. While it may take a few hours to dry, this is the most tedious step.

We’ll go over each stage in depth in this article. We’ll also show you how to get rid of mold in hard-to-reach places and share our go-to cleaning supplies and cleaning recipe.

Why Cleaning A Bounce House Is Important

Cleaning a bounce house on a regular basis will extend the life of the building for many years. Why is this so?

There are a number of ways that dirt and debris can harm the bounce house’s fabric and stitching. Why? As a result of its abrasive nature. A little bit of dirt gets into the fabric when it stretches and pulls.

Moisture-carrying dirt and detritus, on the other hand, encourage the formation of mold. There is a lot of moisture in the bouncy castle if you don’t wash it before storing it, which encourages mold growth. Keeping it dry is preferable to storing it damp after a heavy downpour. Over the course of time, however, the moisture has an impact

Keeping a bounce house clean is the most time-consuming part of its upkeep. Cleaning inflatables may seem like a daunting task because to their size, but it’s actually quite simple. In our tenure as a professional cleaning service, we’ve cleaned these hundreds of times!

Spring Cleaning: Get Mildew Out of Bounce House

Inspection

Inspecting the bouncer before and after an event is essential. Please ensure that the bounce house is fully inflated before removing the children. What you’re looking for (and smelling) are the following:

  • Dust
  • Mold and mildew thrive in moist, dark places.
  • Irritating Scents
  • The cloth has been torn.

This inspection should be completed prior to the arrival of the children. Doing this does not require you to devote 15 minutes of your day. You don’t need to do much more than a cursory inspection.

Bounce House Cleaning Supplies

When it comes to cleaning an inflatable castle, it doesn’t matter what you use. Bleach, bathroom products, and solvents are all examples of harsh cleaners that should be avoided. They have the potential to deteriorate the fabric, and as a result, youngsters using the bouncer will unavoidably be exposed to the chemicals. Even if you scrub and dry thoroughly, you may still miss a spot.

A specific liquid is required for cleaning a bounce house. What a relief, a new toxic substance to keep around the house. No, the cleaning formula for bounce houses is made from common household products.

Our Secret Bounce House Cleaning Formula

Revealed: a 300-year-old family recipe!

Combine the following items in a spray bottle or a pale:

  • 3 quarts of lukewarm water
  • 2 tablespoons of white wine vinegar
  • Dish soap, 2 to 3 drops

Get down to business and shake or stir!

  • Use a spray container that can’t fit 4 cups of water and vinegar, and keep the water-to-vinegar ratio of 3:1.

Are any of these items missing from your arsenal?

Here are some of our favorites:

Spray Bottles

This is a three-pack of commercial-grade items. I think they’re an excellent deal.

Dish Soap

For removing dirt, we’ve found Dawn to be the most effective. The dish soap will aid in removing the dirt from the fabric.

Vinegar

Forget that fancy white vinegar and use your normal distilled variety instead!

Next, you’ll need to gather all of the necessary tools and supplies. This is the bare minimum you’ll require. At each step, we offer product recommendations if you’re lacking something.

  • Using the aforementioned cleaning recipe
  • A little brush or broom (ex from a hand dustpan set)
  • sufficient length of vacuum wire and vacuum cleaner
  • Scrubbing with a gentle bristle brush
  • A handful of fresh rags
  • The use of a leaf blower is an option.

Cleaning Mold Off A Bounce House

Mold patches on the bounce house necessitate the adoption of a more severe cleaning method.

Bleach can be used to get rid of mold. To avoid contaminating the rest of your home, use bleach only where necessary. The color of the fabric will fade if you use bleach on it. However, the damage has already been done if the mold has deteriorated the color. At the very least, bleaching will get rid of the mold.

We propose a spray bottle filled with a 50/50 mixture of bleach and water.

  • Before using the bleach, use the normal formula to clean the moldy area.
  • Use a rag and a bucket of water to rinse the bleach off your skin many times after using it. When you put the bouncer away, the bleach will spread to other parts of the bouncer.

Now that you’re armed with your cleaning formula, time to give that bounce house a good cleaning!

Step 1 – Vacuum

Now that you’re armed with your cleaning formula, time to give that bounce house a good cleaning!

Using your cleaning formula, it’s time to clean up the bounce house!

Prior to vacuuming the bounce house, you’ll want to give it a thorough cleaning. In order to get rid of the majority of dirt and debris, this is the best method.

Any type of broom will do, but a brush from a hand dustpan is the most convenient size.

Small brushes are recommended because full-size brooms may not fit in some bounce houses.

  • Leaf blowers are a great way to get rid of any stray twigs or dust that the kids may have carried inside. Adults will have a blast using these, too!

It’s time to bring out the vacuum cleaner once all the large debris has been blasted or sucked out of the way. Clean the bounce house with a dusting brush to remove any debris. Push the head of the vacuum cleaner into seams to remove dirt that has become lodged there. Mold typically grows in these areas.

Step 2 – Spray

The next step in cleaning a bounce house is to spray it down with cleaner after the major debris has been blown or sucked out.

This is a really straightforward process: spray down each panel and scrub (next step). Go to the next location when you’re done with the last one.

  • For a reason, you have to clean each panel individually. If you apply the cleaning solution all at once, it may begin to pool in the seams as it drips. In the long run, this will invite the growth of mold. Your drying time will at the very least be sped up.

If you’ve found mold, bleach is the disinfectant of choice here. Decoloring the fabric will occur if you use more than necessary. Use a cleaning formula to rinse it off after you’ve finished using bleach.

Step 3 – Scrub

The best tool is a soft bristle brush, although any cloth will do. With a strong grip and enough gap between your fingers and the bristles, we like brushes that are comfortable to use. The best solution is something like this:

The handle is one of the things that makes this one stand out. Getting into every nook and corner is possible thanks to this method. Because you’re using a round brush instead of a square one, it’s easier on your hands. You’ll save a lot of time with this simple ergonomic push.

Get into the seams and stitches when you’re scrubbing. Make a light pressure application to lift the dirt. An excessive amount of force applied to the bouncer will result in excessive wear and tear.

Step 4 – Rinse And Pat Dry

To rinse and pat dry after scrubbing, follow these steps: Having a number of these on hand will come in handy in this situation. When it comes to rags, the best value may be found at Amazon Basics.

The rags can be used to remove the majority of the moisture from the vertical regions. Spray the cleaning formula on any loose dirt on the flat surfaces, then use cloths to pat them dry. In order to hasten the drying process, it is necessary to remove the dirt and cleaning solution.

Pay attention to the needlework, even if you’re already tired of reading it. Do whatever you can with your rags to dry them out.

The bouncy house should not be hosed down. Drying will take a long time if you do this. Soaking a bouncer can also prematurely fade the colors.

Step 5 – Drying

After cleaning, the inflatable structure must be allowed to air dry entirely before being stored. As far as I’m concerned, this is the simplest portion. Allow the bounce house to air dry naturally after it has been inflated. A bouncy house will dry in 3 to 4 hours on a bright day.

  • Leaf blowers might help speed up the drying process.

Side Note: need some ideas for more bounce house fun?

Take a look at these five strategies to ensure that your kids don’t get bored of the same old bounce house games.

Removing mold from a jumping castle ir pvc materials - YouTube

FAQs

How do you get mold out of an inflatable bounce house?

Apply the new mold killer to the moldy areas and scrub firmly with a soft brush or rag until the mold and mildew are fully removed with a mixture of 50 percent bleach and 50 percent water. But mold damage can have a greater impact on color fading and other effects than bleach alone.

How do you clean inflatable mildew?

Scrub vigorously with your bleachy water on the damaged spots. Mold and mildew should come off with relative ease. Do take your time and make certain you understand everything. After you’ve finished washing, be sure to properly rinse and dry the affected area.

How do you remove mildew from an inflatable water slide?

Half-and-half water and bleach in a bucket, then stir it around a bit. The moldy parts of the inflatable water slide can then be treated with this new mold killer solution. Don’t skimp on the application either.

What can I use for mold remediation?

To remove mold after a storm, utilize basic household materials like bleach and dish detergent. Depending on the extent of the water damage, you’ll have to decide what steps to take to remove the mold.

How do you dry out a bounce house?

For 4 to 6 hours, the bounce house will need to air and sun dry. Make sure to remove any standing water and partially open the zipper holes when letting it air dry. This permits the moist area to be drained. Even if the bounce house appears to be dry, this does not imply that it is.

How do you clean Christmas inflatables?

A moist cloth, such as an all-purpose cleaning cloth, can be used to clean the inflatable. Dishwashing detergent can be used to clean stubborn messes, but only if necessary. Before storing the inflatable, make sure it is clean and dry.

Can you pressure wash a bounce house?

Yes, a bounce house can be cleaned using a power washer. Make sure that the pressure washer is set to its lowest level and that it does not get too close to the bounce house material.

Should you remove mold yourself?

Attempting to remove this potentially harmful fungus on your own may be tempting if you find it in your home or office. It is best to leave mold removal to the pros. If the infestation is modest enough, you may be able to handle it on your own.

What is the timeframe for mold cleanup?

How much mold is there, where it is growing (behind walls, etc.), and the materials it grows on all affect how long it takes to remove the mold. Mold cleanup might take anywhere from a few hours to a few days.

Conclusion

Inflatable bouncy houses are enjoyable to play in, but only if they aren’t moldy! You don’t have to worry about them because you can get rid of them with the right materials.

Mold removal from an inflatable bounce house is an important skill to have. Do your part and tidy up after reading this tutorial; we hope you’ve found it useful.

You should also check out this tutorial on how to stop mold in a mobile home if you need more detailed instructions on mold removal and prevention.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.