How to Repair the Undercarriage of a Loveseat Sofa? A Learning Guide

Helen Skeates
Helen Skeates
8 min read

It’s expensive to buy new furniture, and it can be difficult to find a loveseat that blends in with your existing decor while still looking good. It is possible to change an old couch into a new loveseat with a little elbow grease. Our topic today is how to repurpose a broken sofa into a loveseat.

In addition to saving money, this is an excellent way to recycle old furniture. You may transform an old couch into a loveseat if it matches the rest of your decor. To make a loveseat out of a damaged couch, simply follow these directions.

How to Repair the Undercarriage of a Loveseat Sofa

With most cases, upholstered furniture is made of hardwood frames covered in foam and fabric. The wooden framework of a sofa can fracture or split over time as a result of regular usage and abuse, causing the sofa to sag and become uncomfortably loose. Metal mending plates can be used to strengthen the timber structure and repair the damage. With a few simple hand tools, you can fix a loveseat sofa’s undercarriage.

How To Turn A Broken Couch Into A Loveseat - Krostrade

Turn the loveseat sofa over and remove the cushions and pillows. Using a flat-head screwdriver, remove the staples securing the cloth to the bottom of the undercarriage on three of the four corners. Allow access to the sofa’s underside by removing the cloth from the fourth side and pulling it to the side.

To figure out the kind and size of mending plates you need, inspect the wood structure of the undercarriage for cracks, splits, or separated joints.

Mark the hole locations on the frame member with a pencil by positioning half of the mending plate on one side of the fractured frame member. Install a power drill with a 1/8-inch drill bit, then drill pilot holes in each of the holes. Attach the plate to the other half of the frame with 1-inch wood screws using a screw tip bit.

Fix the fractured frame member half with a mending plate and the other half with a one-handed bar clamp and squeeze the clamp until the plate adheres to the wood and the joint is tightened. Pre-drill holes through the hole locations in the remainder of the plate, then attach the remainder of the plate to the frame member with wood screws.

Sofas and Loveseats for Small Rooms

You’ll need a one-handed bar clamp to press down and tighten your repaired frame member’s mending plate onto its fractured counterpart and secure it in place. Attach the remaining plate to the frame member by screwing wood screws through the pre-drilled holes in the remaining plate.

Compact rooms benefit from modern, clean-lined loveseats with low backs rather than bulky, richly padded ones. Color and pattern have an impact on the visual space as well. To keep the area from feeling cluttered, use upholstery in light, simple colors.

How to Fix a Leg Chair in a Soft Loveseat - Krostrade

It’s easy to see why loveseats have become so popular in recent years. Both in large and small spaces, they create a relaxing atmosphere conducive to socializing and catching up with family and friends.

How to Make a Sofa Into a Loveseat

You may not want to spend a lot of money on new furniture, and finding a sofa that matches your existing decor and fits your living room might be challenging. In some cases, an old sofa can be transformed to create a love seat. You may save money and recycle old furniture by using this option.

Converting an old sofa into a love seat not only improves your home’s decor, but it also makes the most of the space you have available.

  1. Use a staple remover or a flathead screwdriver to remove the existing staples from the upholstery fabric. Discard the previous covering. If the batting and foam are damaged, they should be removed and replaced. Using the measuring tape, measure the sofa’s length and mark the area to be cut with a pencil.
  2. A reciprocating saw and a hacksaw are all that’s needed for this project. To ensure a tight fit, sand the cut edges of the sofa and armrests. Before connecting the wood together, drill holes into the pieces with the smaller drill bit. Using a drill, fasten the arm to the rest of the sofa.
  3. Determine the amount of foam, batting, and upholstery fabric needed by measuring the final measurements of the love seat. Purchase the necessary materials for the love seat’s recovery. To fit the piece of furniture, cut and measure foam and cloth.
  4. Arrange the foam so that it covers the love seat’s arms, back, and seating sections. Using a staple gun, secure it with batting. Fit the cloth over the foam and love seat and sew it together using a sewing machine.
  5. Make sure the love seat’s backside is covered. Turn the love seat upside down and staple the cloth along the bottom concealed edge along the upper edge.. edge. edge. edge. Stack the fabric piece on top of the previously stapled piece, then stapling it along the sides and bottom. Tape the armrest fabric in place, being sure to staple the fabric on both the visible and the hidden sides. Put staples along the top inside edge of the bench seat fabric, then flip it over and do the same thing along the underside of the love seat cloth

How to Separate a Sectional Sofa and Use It to Arrange a Room

Separating the Sections

Because they slide apart, certain sectional sofas are a snap to disassemble. With other sectionals, screws or bolts are used to join the parts together. If this is the case, take apart the sofa using a screwdriver or a wrench. Slides under the sofa’s feet prevent scratches on the floor and strain on your back when you pull the parts apart. You can ask a friend to help you move heavy furniture.

Main Sections

Large sections of sofa should face a room’s focal point, such as the television or an attractive picture window. An intimate conversation area can be created by turning two long, straight parts of the sofa toward one another. With a coffee table or ottoman in between, place them perpendicular to the room’s focal point and facing each other. Place a small side table against the armless end of the section to visually balance it and make it look deliberate because certain sections may have an arm on one side and not the other.

How to Repair Sagging Wicker Loveseat? - Krostrade

Chaise or Corner

Once the main pieces of the sofa have been dealt with, you will most likely be left with a chaise lounge or a corner section. Pillows can be added to a corner part to make it more comfortable as a chair. If there is only one straight section of the sofa, place your corner or chaise on a diagonal to it. The chair should be positioned in the centre of the space, with the other sofa, coffee table, and focal point of the room all in view.

Depending on the amount of other furniture in the room, it may be on the same side of the room as the other half or on the opposite side. Use the corner or chaise at the open end of two straight sections to create a U-shaped seating space.


Large area rugs are a great way to bring together distinct sectional pieces and avoid the seating area from feeling too disjointed. Consider any areas of your sofa with a reclining back or extensible footrest when arranging your living space. Allow ample room for individuals to stroll around the piece, even if they are reclining or extended. Despite the fact that you’ve divided the area into sections, consider moving your sectional furniture away from the walls to create a more intimate and cohesive space.


In order to transform a broken couch into a loveseat, follow these instructions. Use what you have around the house to repurpose old furniture. There’s no need to spend extra money on new furniture when you can make it yourself.

Helen Skeates

Helen Skeates

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.