It’s possible that you won’t want to take on this task. Even though sewing can be a wonderful outlet for creative ideas, the process is not always worth it. Attaching non-stretch material to stretch material and getting the desired outcomes are both difficult tasks.
As you may have to sew the non-stretch fringe pieces on one by one and that could take a long time to complete, this method can be very difficult and tedious. Once you’re done, the stretch cloth may lose a lot of its pliability.
Continue reading our post to learn more about this type of project. It goes into depth to provide you with the most relevant details. According to the recommendations given, the non-stretch fringe should be replaced with stretch fringe.
How to Sew Non-Stretch Trim to Stretch Fabric
The non-stretch material should be cut on the bias first. The cloth is designed to be a little more elastic because of this diagonal cut. The next step is to pin the stretch material in place and slowly draw it taut. To begin sewing, you must first finish pinning.
If you don’t want your clothes to seem ruffled, don’t tug the stretchy material. That’s one way to deal with this challenging issue. Holding the material flat and solid as you prepare to work is another way to get started.
After that, sew a basting stitch along the edge of the fabric you’ll be trimming. Pin the trim in place, making sure to keep the cloth flat as you go, after that is done. You can now sew over the trees, but be careful not to break your needle as you go along.
Hem the stretch fabric first if the trim is going to be on the bottom. If you look at tulle skirts that have been sewed on leotards, you will see this technique used rather often.
Sewing Trim On a Stretchy Fabric
As previously said, attempting this endeavor might be tough and time consuming. Children and grandchildren are only two of many good reasons to get started on a project like this.
A excellent motivation to tackle difficult jobs like this is to ensure that the students have appropriate attire for their various activities. It’s not just what’s been described that’s important, but the appropriate needle and thread as well.
Using a needle specifically designed for flexible fabric is a good idea because you’ll be going through a lot of it. Ballpoint needles or stretch needles are what you’re looking at. In order to ensure that all of the textiles are secure and can do their job while worn, the correct sort of thread is essential.
Using an open toe foot or a satin stitch foot to sew the zig-zag stitches is advised, as is the correct foot. Stitching with a zig-zag pattern should help stretch material remain flexible.
Even while you can utilize a walking foot as well, the other two foot options are preferred.
How to Sew Fringe On a Stretchy Fabric
In order to begin, you’ll need to perform a pre-wash. When it comes to clothing, it doesn’t matter if it’s made of natural or synthetic fibers. To avoid issues after you’ve completed your project, wash them all before stitching.
Choosing the correct tools is necessary for the next stage. It is important to use the correct needle, thread, and pins since some fabrics are better off without the extra holes that pins leave. With clips, you can keep the trim in place as you work.
Then, while stitching your trim, always begin from the same edge. You may avoid puckers and make the trim look more professional by using this method. The ideal bobbin thread to use is one that cannot be seen from the top.
Topstitching is the called for stitch pattern at times and a good invisible thread in your bobbin will hide that material from view. Before you begin sewing, don’t forget to do the basting. You want the trim material to remain in place until you get those permanent stitches in place.
When topstitching is necessary for, use an invisible bobbin thread to keep the unwanted fabric out of sight. Basting must be completed prior to sewing. You need to keep the trim material in place until you can sew the permanent stitches.
What Kind of Stitch Do I Use for Stretchy Fabric?
When it comes to this, you’ll want to exercise caution. In order to work with stretchy materials, you’ll need to use a straight stitch. As a result, wearing the garment will cause several seam difficulties.
Sadly, the type of stretch stitch required to sew with stretch materials isn’t included in many sewing machines. The top stitch and zig-zag options have previously been explained, but you can also use the lightning stitch design if you like.
The stretch stitch, a triple straight stitch, is another excellent option. A excellent alternative is tricot. Alternatively known as the 3-step zig-zag, you can then descend to the 2-step zig-zag.
When you’re done, you can use the knit or the stretch buttonhole stitch (there may be more than one of these on your sewing machine). We won’t be skipping the honeycomb or the blind hem stitch either.
To put it another way, there are a plethora of stitch designs at your disposal for exploration. Determine which cloth will work best for you by conducting a test on various scraps of fabric. For those who don’t already own a sewing machine with all the functions listed above, there are a number of extras that can be added.
Because we didn’t cover every stitch pattern that may be used with stretch fabric, you’re likely to come up with a slew of new ideas on your own.
What Setting Should I Sew Stretchy Fabric On?
Any sewing project requires a high degree of tension. You risk damaging stitch quality if you go too loose or too tight. It is recommended that you use tension dials no. 2 or no. 3. Most stretch textiles can be used with those parameters.
If you haven’t already, change the needle on your sewing machine. To ensure that the needle is as sharp as possible, swap out the current one with a fresh one. Afterwards, test the tension on some scrap fabric to make sure it’s adjusted correctly.
It’s important to keep in mind that not all stitch styles are compatible with every type of fabric or every sort of setting. Make sure your thread and stitch pattern work with the cloth by fiddling around with the stitch settings. When working with stretch materials, the best stitch to use is a long stretch stitch or a zig-zag stitch.
If this is the case, you may need to increase your tension setting from 2 to 3 to 4 or even higher. This is for textiles that won’t work at the previous setting.
That’s the secret to stitching on stretch cloth. To acquire the ideal one, you’ll have to make a lot of tweaks.
Some Tips for Sewing On Stretchy Fabrics
- Using a serger or an overlocker sewing machine isn’t always necessary. You don’t always need to use these two machines for stretch materials. If you don’t have a serger, use an old-fashioned zig-zag stitch instead.
- Check to see if the pattern you’re using for your new sewing project and the fabric’s degree of stretch are compatible.
- Stretchy fabrics should always be pre-washed. Lay it flat to dry after washing so that it doesn’t lose its shape.
- When cutting your stretch material, avoid pulling on the material as you cut. 4. Don’t leave any excess material hanging over the edge of your cutting area.
Some Final Words
If you’re up for the challenge, go for it. The most important thing is to use the correct tools and settings.