How To Stack Maytag Washer And Dryer?

When you’re living in a small place, stacking your washer and dryer can help you make more room. Washer and dryer stacking is possible with a few simple tools and a specialized stacking kit.

Regardless matter the actual square footage of a home, for many individuals, there never seems to be enough room. You may have to think outside the box when it comes to vital appliances like washers and dryers. If you’re looking to save space in your laundry room, stacking your appliances is an easy way to do so.

Maytag Washer And Dryer

To date, Maytag washers have maintained their reputation as reliable and inexpensive. This warranty comes with a wide range of appliances. As far as kitchen design trends go, they’ve kept up with the Joneses. They also have a selection of older models if you like a more retro look.

When it comes to Maytag’s usefulness, practicality, and aesthetics, they don’t cut corners.

For removing stains from clothing, these washers are an excellent option. Few appliance makers still make top-loaders with agitators and impellers like Maytag, which are known for their outstanding efficiency and long-term customer satisfaction.

Agitators Or Impellers

Some people like to use agitators to clean, while others prefer to use impellers. So which one is better? Actually, that’s going to be a matter of opinion. But first, let’s break it down so you can make up your own mind.

Agitators

Top-loading washers with an agitator in the center. It will be much easier to figure out its anatomy now that we have a mental image of what it looks like. As the agitators are long, they take up a lot of area in the washer. However, it isn’t just there to facilitate more movement and improve the cleanliness of clothing that it serves these functions. Activists move in a variety of ways on a regular basis. They do this to make the clothes look like they’ve been sprayed with something. It’s pre-programmed to tackle the toughest stains and dirtiest garments with ease. A deeper clean can be achieved by allowing the clothes to rub against each other as you move. Complex jobs can be done with a little more aggression from these machines than impellers.

Impellers

Next on the list are the paddles or impellers that you can see on the bottom of your top loader. Low water levels are necessary for their survival. The purpose of this is to maximize the friction generated by rubbing the garments together. Compared to agitators, impellers are easier to clean. They can also be configured to perform a variety of cleaning techniques. In order to wet the clothing and get them to rub against each other, they go from one direction to another. The fact that it includes more than simply paddles—like the wheels or discs you see—means it is able to move more quickly when it is spinning. During the process of tossing the clothes around, they gently scrub them. This ensures a thorough but gentle clean for the user. Incorporating impellers into a machine allows it to handle heavier loads.

Steps To Stack Maytag Washer And Dryer

In order to stack the Maytag washer and dryer, what are you looking for? An adjustable wrench, screwdriver and a level are among the tools you’ll need for stacking. To stack a Maytag washer and dryer, follow these simple steps:

Step #1. Read the manual

Make certain that they can be stacked. If they are, it will be noted in the user guide. Make sure the stacking kit you have is compatible with your appliances, according to the instruction booklet.

Step #2. Measure your space

This step requires the use of a measuring tape. Before you begin stacking, take a measurement of your available area. A few items, like as wiring and ventilation, will necessitate a little more room, so keep that in mind.

Step #3. Positioning

It is imperative that the dryer be placed directly on top of the washer while stacking. Pads can be used to place them while following the manual’s directions. Hooks, brackets, and clips are all included in your stacking kit. If you’re going to use screws, make sure they’re securely fastened in place.

Step #4. Reinstall

It’s time to reinstall them once they’ve been placed where they belong. The water supply, the gas lines, and the electrical outlets should all be shut off. Place each line carefully so that it doesn’t get in the way or cause any mishaps throughout the washing and drying process.

Step #5. Test your setup

Test your washer and dryer as you normally would before calling it a day. To determine if any adjustments should be made to the positioning, check for loose screws or hinges that should be relocated. There is nothing to worry about.

Instructions For Stacking A Washer And Dryer

The following are some things to keep in mind when preparing to start your laundry stacking project:. It is important to remember that only front-loading machines can be stacked and that you should check the owner’s handbook to ensure that your current washer and dryer are stackable before making a purchase. Choose from a variety of stacking models from Maytag to find the perfect match for your needs and your budget when it comes to buying a new set of stackable washer and dryer.

You’ll also need between 1 and 5 inches of room in the area allotted for your washer and dryer for ventilation in the back and on the sides–at least 5 inches of space between the rear of the washer and wall, and at least 1 inch of space between each side of the washer and wall. If installing in a closet, make sure that your appliance doors can fully open and close, and that the bottom of the closet door to the floor has about an inch of room to aid with air circulation. A closet door or louvered door must have air apertures at the top and bottom.

Tools Needed

• a set of stacked tools
• Using a caliper
• Level
• An adjustable wrench.
• Screwdriver
• a good friend of mine
• The material of choice is cardboard (optional)
• Self-adhesive foam pads (optional)
• Straps are used to lift objects (optional)

Step 1: Consult Your Owner’s Manual

You should only stack a washer and dryer if the stacking process is suitable with your current model(s) of washer and dryer. There is no guarantee that all of your appliances are interchangeable, even if they are manufactured by the same company. Check your owner’s handbook for additional information and instructions, including the type of stacking kit you’ll need to buy.

Step 2: Prepare The Space You Want To Use For Your Stacked Washer And Dryer

Measure the space you’ll be utilizing for your stacked units before moving or rearranging any of your appliances. Keep a few inches of clearance between the machine and any wiring or ventilation, as well as any natural vibrations. You should also use a carpenter’s level to ensure that your floor is level so that you can properly adjust the washer’s leveling feet.

Step 3: Purchase The Correct Stacking Kit

Depending on the brand of washer and dryer you have, you’ll need a specific stacking kit to keep your stacked machines secure. Stacking kits, which range in price from $40 to $100, often include a few screws and bolts or brackets to hold your washer and dryer together. The maker of your appliances may sell stacking kits directly to you, or you may find them at most home improvement retailers. Stacking a Maytag® washer and dryer? Use this stacking kit to make sure they’re a perfect fit.

Step 4: Get Your Appliances Ready For Stacking

If you are stacking your washer and dryer, your dryer should always be on top. Rest a piece of cardboard on the floor and place your dryer on its back on the cardboard to protect it from damage and make moving it simpler. With an adjustable wrench, detach the legs from the base of the table. Thread the dryer’s stacking feet, if provided, onto the stacking kit. If you ever decide to take your washer and dryer apart, you’ll need to have the legs you removed handy.

Step 5: Position Your Washer And Dryer

The washer should be placed where you want it to stay, with a few extra inches of clearance to stack it properly before installation. Make sure the washer’s feet don’t need to be adjusted by using a level on it. This article is for Maytag owners who want to learn how to level their washers. Lift the dryer back to its upright position by using the piece of cardboard to move it closer to its installation site.

Step 6: Stack Your Dryer On Top Of Your Washer

As directed by the manufacturer, place foam pads on top of your washer. To hoist the dryer, you’ll need the assistance of a second person. If you can, use lifting straps to spread the dryer’s weight more evenly as you lift it.

Dryer placement on top of washing machine should be done with the sides and front of the dryer lining up with the washing machine’s sides and back.

Step 7: Attach Stacking Kit Brackets And Clips

To ensure that your dryer does not move or wobble while it is in operation, you’ll want to secure both the dryer and the washer. If your stacking kit included clips or brackets, use a screwdriver to open them if necessary and attach them to the lowest edges of the dryer. Stacking kit brackets’ hooked edges should be over the dryer’s clip; if required, move the dryer forward and screw the screws in firmly with a screwdriver.

Step 8: Reinstall Washer And Dryer

Connect the dryer’s water, vent, and gas lines (if necessary) following the instructions in your owner’s manual. Your stacked units can now be moved back to their original location once all of the components have been re-installed securely.

Step 9: Test Run Your Installation

Running an empty cycle in your washing machine and dryer is a good way to see how well your stacked appliances work. A washer and dryer that move too quickly or jerkily should be avoided at all costs. There will always be some degree of vibration, but if it is excessive, it could mean that your machine isn’t level or that the stacking kit wasn’t properly installed.

Step 10: All Set!

After the test run, if everything appears perfect, you’re done! Enjoy the extra floor space while still using your appliances.

How Tall And Wide Is A Stackable Washer And Dryer?

The average height and width of a stacked washer and dryer are 40 inches and 28 inches, respectively. Your appliances will be about 80 inches tall when stacked. To assist you in your search for a new washer and dryer, we’ve created this washer and dryer sizing guide.

Can You Stack Any Washer And Dryer?

Not at all. In order for your washer and dryer to be stackable, they must be made by the same manufacturer. You should seek for models that clearly mention that they can be stacked if you’re in the market for a new washer and dryer.

How to Start a Maytag Washer & Dryer

Maytag washers and dryers are available in a wide variety of models. When it comes to washing machines, Maytag has both front- and top-loading options. Depending on the sort of clothing you’re washing or drying, you may select from a variety of cycles on both the Maytag washer and dryer. Getting the washer or dryer up and running is a straightforward procedure.

Step 1

Wash or dry the clothing as instructed.

Step 2

If desired, place a dryer sheet in the dryer or fill the detergent cup with laundry detergent.

Step 3

Close the door with a firm slam. A washer or dryer that has its door open will not work.

Step 4

If your model has a “Power” button, press it. The “Power” button can be found to the left of the cycle dial.

Step 5

To utilize a specific cycle, turn the cycle selection dial.

Step 6

To begin, simply press the “Start” button on your keyboard. In the absence of a “Start” button on your washing machine, you can start the wash cycle by turning the cycle selection dial all the way back to the left.

FAQs

Can you stack a full size Maytag washer and dryer?

To maximize space, Maytag® front-loading washers and dryers can be stacked. The next step is to decide what size capacity and features you need in your washer and dryer combination after you’ve decided how to set them up.

Can you stack a Whirlpool dryer on a Maytag washer?

The washer and dryer models of the same brand will be interchangeable, but you will not be able to stack laundry units from two separate manufacturers. You should also keep in mind that stacking front-load washers and dryers is normally only possible.

Are stacking kits universal?

Because not all stackable washer and dryer units are the same, there isn’t a universal stacking kit. As a result, there are numerous stacking kits on the market, each of which is tailored to accommodate a particular brand’s models.

Can you stack washer and dryer of different models?

Different brands of washers and dryers may not be compatible. Find out if your washer and dryer are compatible by checking the manufacturer’s website or your owner’s manual. When stacking, the dryer must always be on top of the washer. Don’t stack machines from different manufacturers.

Can you use stackable washer and dryer at the same time?

Yes. It is possible to run both the washer and dryer at the same time.

How do you stack a washer dryer without a kit?

If you don’t have a stacking kit, how do you stack a washer and dryer? Enviro Rubber’s APL600 rubber mat can be used to separate your washer and dryer.

Can I put my dryer on top of my washing machine?

Yes. A top-loading tumble dryer is the most suggested and ideal method of drying clothes. A concrete block in the washing machine makes it significantly heavier than a tumble dryer, making it the best candidate for placement at the base of the stack.

Do stackable washers have to be stacked?

The Units can be stored next to one another. In contrast, because the dryer is shorter, the washer’s height would be out of proportion. As a result, it is advised that the units be kept stacked.

Are all stackable washers the same size?

Many variables influence the design of stackable washers and dryers, including: The width of a unit is indicated by the number listed on the unit. Most ordinary washers and dryers have a width of 27 inches, so that’s the most popular choice (which will fit more easily in most closets).

It’s A Wrap!

Stacking Maytag washer and dryer has now been explained to you. We sincerely hope that your appliance placement upgrade went successfully and that this article was helpful. Always keep in mind that safety is the most important consideration when it comes to your home’s belongings. Stackable washer and dryer installation and Maytag washer reset are other topics you may be interested in.