You can use Concrobium Mold Control to get rid of mold completely if you know how to apply it. It is clear from the name that this is a mold spray that tries to eradicate and prevent the growth of mould.
It’s a plus that this product doesn’t include any toxic chemicals. You’re in the clear!
There are, however, a few points to keep in mind when using this tool. You must initially avoid making small mistakes when cleaning before you can begin to prevent any sight of mold.
Where Does it Work?
In most indoor environments, Concrobium Mold Control works well and can be used in homes, companies (including institutions, cottages, RVs and boats), cottages, RVs, and boats. These surfaces can be used with Concrobium:
- Wood composite
- Many more!
How Does it Work?
Mold spores are crushed and an invisible antimicrobial barrier is formed while Concrobium dries.
In addition to fogging, spraying, painting with a brush or roller, submerging, and employing a compression sprayer, there are several techniques to administer Concrobium. The method you use will depend on what you’re trying to treat. A thin layer of therapy should be applied to the affected area and allowed to dry in all cases. Using too much will leave a residue, while using too little will fail to remove all of the mold or form a protective layer that will keep it from growing again.
Take Concrobium and simply utilize it.
- Apply Concrobium Mold to your skin. Wet the area until it is completely saturated.
- Dry the surface fully (typically 2 hours, but 24 is recommended before disturbing the area)
To find out how much product to use, consult the product’s labels.
Concrobium Mold Control Ingredients
Sodium carbonate (washing soda), sodium bicarbonate (baking soda), and trisodium phosphate make up Concrobium Mold Control, a proprietary solution. To put it succinctly, this polymer, which contains three salts, is extremely alkaline (not acidic).
Mold, like the human body, prefers an acid-alkalinity balance that is unique to each environment. pH levels 6.5 to 7.5 are ideal for both plants and animals, however mold can thrive between levels 2 and 9. Alkaline is considered anything above 7.5, whereas acidic is anything below 6.5. If you’re looking for an alkaline mold killer, Concrobium Mold Control has a pH level of 11+, which is impressive since the highest level is 14. In an acidic environment, mold can remain dormant for a while, but it cannot survive long in an alkaline environment, which is why so many antifungal diets recommend alkaline foods.
In addition, the tri-salt polymer begins to dry as soon as it is sprayed on the mold. Mold spores and colonies are crushed by the solution’s molecules as they dehydrate and clump together. For several months after the solution has dried and has been applied to the moldy area, an alkaline barrier is left behind to keep the mold from returning. This is exactly in line with the statements made by the business.
How to Use Concrobium Mold Control
Even in their 3-minute video, Concrobium Mold Control explains how to get rid of mold. Any time you locate mold in your home and intend to use any kind of product on it, you must ensure that you’ve done the required procedures to not only begin the process of removing it, but also to avoid its recurrence at a later date. You can learn more about moisture control here.
Cleaning mold using Concrobium Mold Control is easy once you’ve addressed any excess moisture and cleared the area of dirt and debris.
First, cover the mold-infested area with a thin, equal layer.
Let it dry completely in Step 2.
Remove any leftover mold spots and residue by scrubbing the surface with a moistened cloth or brush.
For mold infestations that are particularly stubborn, repeat this step.
Tip 5: Reapply a thin, even layer of mold preventative to exposed surfaces and avoid wiping.
Concrobium Mold Control Reviews
A MoldBlogger writer received Concrobium Mold Control years ago to conduct mold testing. It’s too bad that no rotten chance presented itself. Being disappointed that a mold problem did not exist may seem paradoxical at first, but the opportunity to uncover a commercial mold killer that truly worked was an incredible find.
Fortunately, there are a plethora of other customers who have shared their experiences over the years. Most people believe Concrobium’s claims to be true, however a few have questioned the components. Mold Control isn’t as simple as mixing water and baking soda, as some have suggested. Three distinct salts have been measured using Concrobium, as previously mentioned. Mold Control would not have the same alkalizing impact if it weren’t for the tri-salt polymer mixture. You won’t find an article on MoldBlogger claiming that merely baking soda and water can solve your mold problems.
You must first consider safety precautions when applying Concrobium Mold Control to clean your home. Ensure that you have checked all the boxes before beginning the cleansing process
Clad yourself in safety gears
Ammonia, acids, bleach, or VOCs may not be present in Concrobium. However, mold spores are still present. It could cause asthma or exacerbate any current respiratory troubles you may have by causing you to inhale it.
You should use gloves, goggles, and N-95 masks or P-100 respirators whenever you come into touch with mold-infested places. Employ protective gear if you use fogging, as inhaling too much moisture from the fog can be dangerous.
You may also want to learn how to spot molds as a precautionary measure. This manner, you’ll be able to tell if you’re dealing with poisonous molds, which are frequently associated with black mould. The information in this post on black molds will prove invaluable to you.
Consult its information sheet
Its Material Safety Data Sheet (MSDS) provides additional safety and technical information (MSDS). To learn more about Concrobium, look through some of the frequently asked questions (FAQs) posted on the Concrobium website.
There is a lot of information in the MSDS regarding how the product is made, what the dangers are, what the ingredients are, and what the first aid is. For individuals who are hesitant about the use of Concrobium Mold Control, this document is a helpful resource.
Spray bottle for tiny areas, brush or roller for trimming, pump sprayer for big and accessible surfaces such as walls, and cold fogger for basements, attics, or other large enclosed rooms are all options for applying the solution.
More product will be needed if the afflicted surface is porous, such as textiles, or smooth, such as vinyl concrete. To put it another way, raw construction materials such as concrete or brick absorb more moisture than drywall or wood products.
Fogging is an option if you wish to cover a larger area. There is enough product in a half-gallon container to cover roughly 1,400 square feet of floor space. With a garden or compression sprayer, you can cover 350-450 square feet of surface area.
It takes Concrobium Mold Control less than two hours to dry. The typical drying time is, however, influenced by a number of factors. Other factors include the humidity and temperature of the afflicted areas. –
Suppose you decide to paint after applying the solution, and you’ll have to wait a day or so for it to dry. In order to speed up the drying process while fogging, open windows or other air sources.
Frequency Of Application
The solution must be reapplied depending on the amount of time the region has been exposed to water. Periodically reapply the product if the surface has been exposed to water, whether from leaks, washing, or running water.
Concrobium Mold Control, on the other hand, is notoriously difficult to eradicate due to its molecular absorption. Water exposure affects the amount of reapplication needed. This implies that you must keep an eye out for any spots that may need a new coat of paint.
When it comes to mold removal, Concrobium Mold Control can be a little intimidating at first. This does not, however, need a state of puzzlement. That’s what this guide has clearly demonstrated.
You’ll need to take note of everything that’s been said here. If the problem recurs, it’s a good idea to go back and reread it. When you’re done, this moldy task will no longer seem intimidating.