Table runners can make a beautiful change. If you decorate the table using one of these runners, you’ll instantly improve the appearance of your table and dining area. They’re not too difficult to create unless you choose to go with elegant designs and stitching.
- Upholstery Fabric Types and Names: Ultimate List Update 09/2023
- Most substantial Hand Stitch Vs. Strongest Stitch: Which Stitch to Use and When Update 09/2023
- What is Slinky Fabric? What You Need To Know? Update 09/2023
- How to Fix a Warped Tupperware Lid? Troubleshooting and Repair Guide Update 09/2023
- Basic Body Measurements: 6 Rules in Taking Body Measurements Update 09/2023
How big is the table runner? The general rule is that a table runner is supposed to measure between 10 to 15 inches in width. It shouldn’t be greater than 1/3 of the length of the table. The typical length is between 36 to 108 inches, including the 6-inch excess on either side.
To find out more about the process of making and the dimensions of a table runner go on to read our post. It will provide you with the details you need to be aware of what you should do when you are beginning to create table runners for yourself as well as your loved ones.
Should Table Runner Hang Over Edge Table?
It is suggested to allow the table runner to hang approximately 6 inches from both sides of the table. The little bit of extra fabric is designed to add a touch of elegance and enhance the look of your table.
But, this idea isn’t a fixed proposition due to a primary reason. If you have pets or kittens living in your home If you have kittens or cats, you might consider rethinking hanging the table runners over the table’s end.
The dangling fabric can be a tempting lure for kittens and cats and their claws are sharp enough to alter the table runner, which you’d prefer not to be able to see. If the kittens or cats get lucky, they might be able to grab the table runner and drag it along with the items you would not like to see damaged, on the floor.
Another reason to keep the table runners short is when your children are small and love to play with hanging objects.
Can a Table Runner be Shorter Than the Table?
It’s not a problem to make your table runner longer than your dining table’s length. You could also make the former be the same length as the latter. The only difference is if the table runner is adorned with tassels.
If so, the tassels need to be hanging above the table’s edge. The table runners should be long enough to allow the tassels naturally to hang free of obstruction from the table’s top.
What you do with your dining table with the table runner is dependent on your personal style. One reason to have an aft table runner is to showcase your table’s attractive appearance.
How do You Measure for a Table Runner
The first thing you need to think about when designing a table runner is how big it’s likely to measure. You must choose this as the table in your dining room could have left. If so, you will need to decide if your table runner will be lower than your table that has leaves or if it is tall enough to reach more than 6 inches.
If the second is true then you’ll have very limited use of the table runners. You will then need to measure the table and create allowances for seams as well as the overhang of 6 inches. Six inches is doubled into 12 since you’ll need an identical overhang on both ends.
Following that, you’ll be required to measure the length of your table, and then divide the result into thirds. Your runner should be 1/3 of the length of the table. Be sure to include an allowance of fabric for your seams.
Once that’s done after that, the table runners should be in between 10 to 15 inches but some sewers recommend that it ought to be 14-17 inches in width.
Once you have an accurate measurement, you can cut the fabric and stitch.
How Long Should a Table Runner Be For a 6-Foot Table?
In accordance with the suggested guideline that a table of 6 feet should be equipped with a table runner that is 84 inches in length. The measurement should meet the 6-inch gap between the table’s ends.
However, you’re not limited to the length you want. You can use the same length as the table you have and then make your table runners 72 inches. Or, you could reduce that length any more and have them in the range of 42 to 70 inches.
The length of your table will be determined by what you intend to decorate your table if guests are seated at the ends, consequently, there is no need to extend the table. There are plenty of choices when it comes to decorating your dining table.
Table Runner Dimensions for 8-Foot Table
The above argument applies to tables which is eight feet long. You might want to make the table runners extend 12 inches beyond the ends of the table. This way you’re looking at making it around 108 inches in length. That’s 96 inches plus 12 inches for the overhang.
Of course, you’ll require a bit more length to your fabric to accommodate the seams. They aren’t that big therefore, be cautious and don’t add excess fabric.
The length of your seams will be determined by how large you’d like to make them. One of the advantages of having small table runners ranging from 40 to 50 inches could be that they are hidden when you put up other keepsakes at your dining table.
If you wish your smaller Table runners noticed by guests who are not eating Then you’ll need to move them or cut down on the number that you place on the top of your fabric.
What Size Table Runner do I Need for a 60 Inch Round Table?
Before we present you with the measurements for this scenario It is important to note that the table runner must not be hanging higher than the tablecloth. If you’re using a tablecloth that is hanging 2 to 4 inches above an edge on a square, round or rectangle table, your table runner must hang between 2 and 4 inches over the table’s edge.
For a 60-inch round table, its length must be approximately 72 inches total. For width, you’re considering 20 inches of table runners. The width will always be 1/3 of the table’s length. However, not everyone agrees with that rule as they believe that too much width can hinder dining.
They suggest that the table’s runners be reduced to 1/4 of the table. One-quarter of a 60 inch round table is 15 inches.
Table Runner Size for 72 Inch Round
A 72-inch round table is equivalent to a 6-foot size. If you keep the rule of 6 inches in mind, you’ll need an 84-inch table runner at the top. If you do not wish to create an overhang then increase the size of your table and increase it to 72 inches.
The width of the table runner should be approximately 2 feet or 24 inches. This is in line with the rule of 1/3. It could need adjustment since that’s above the standard that is 10-15 inches in width.
In any event, how big your table is, is your choice. It’s up to you and your choice.
The advantage of using guidelines for thumbs is that they are not used to apply equally to all sizes of tables. If you are able to extend the table beyond the average size table, you’re likely to encounter problems with the width, and the table runner could affect dish settings.
For length, you’re considering a minimum of 102 inches in the case of following the standard guidelines. However, if your tablecloth extends 3 inches above the table, table, then the runner must not exceed 3 inches at the most.
Width is a different issue, and you shouldn’t violate the 10-15 inch rule, as the 1/3 rule suggests that your runner must be at least 30 inches wide. You can do this by ear.
Based on the examples we’ve seen, it appears that there’s little room to play with the 6-inch rule when it applies to round tables with smaller sizes. Table runners on these are about 6 inches lower to the opposite side.
There are some that appear to go approximately 1 foot above the edge. So you are likely to have some flexibility in coordinating the table runner with a 48-inch round table. The guidelines say it must be at least 60 inches in length with a width of 16 inches.
You can experiment with these figures and determine what you like most attractive at your desk.
Some Final Words
There are rules for how long and wide your table runner must be longer. However, these guidelines are created as a guiding hand and can not be applied in a literal sense to all sizes of tables or designs.
If your table is in good condition, it’s perfectly fine. Remember those table runners may be either shorter or as long as the table. It’s up to you to decide.