Updated at: 20-04-2022 - By: cnbusinessnews

Jean buttons are great because they’re usually made of metal and can be recycled. There is no difficulty in removing or attaching them. A little raw force and a little arm power are all that is required to obtain the hold you desire. Only a few seconds are required for each.

You may simply need a flat head screwdriver to pry apart the two parts of the 2 part denim buttons. Then all you have to do is pull the jeans apart. If you don’t have the right tools, you’ll have to use some brute force to get the button nail to penetrate the fabric.

Continue reading this article to find out how to remove or attach these two-part buttons. There is everything you need here to get the task done properly. The most secure way to attach buttons to garments is using two-part buttons.

Can You Reuse a Jean Button?



Unless the button parts are damaged, they can be repurposed if in good condition. In order to get a solid grip on the material, you may need to patch up the previous hole and start over with new cloth.

It’s not difficult to reattach the rivet-style buttons. Using the proper equipment, you should be able to deliver a swift, strong, and extremely hard strike. The majority of individuals will tell you to get a professional to do the work, yet they may be wealthy.

It’s a straightforward task in and of itself. To drive it through the fabric, simply set the bottom half where you want it and strike it hard enough. The final step is to apply a tap on the top button.

It shouldn’t take more than five minutes, and your jeans will look as good as new after that. Replacement buttons aren’t too much if they’re in decent condition.

Can You Remove Buttons From Jeans?

Jeans’ buttons can be removed, yes. It’s normal to do this after a pair of jeans has either outlived its usefulness or has undergone some alterations. All you need to get the job done is the correct equipment and the assistance of a second set of hands.

Some force is required to bring the buttons on jeans together and to separate them again. In order to remove the buttons from the cloth and each other, you’ll need some aid from a friend or family member.

If you’re not too aggressive, you should be able to handle the work without hurting the button parts. The task is not difficult, but getting those parts to release may take some time.

If the two-part buttons are not damaged, they can be reused. Later, we’ll show you how to remove the two-part buttons from denim fabric using a variety of approaches. It’s best to go slow and easy when completing this assignment.

Can You Remove Buttonhole Stitches?



Again, you can accomplish this activity, but you must use caution. A rip in your shirt, pants, or jacket is all it takes for you to lose your cool. You should be able to get the task done without destroying the cloth if you use the correct tool, and this time scissors will not be the right tool.

A two-sided straight edge razor blade with a sharp edge on both sides is one of the best instruments to have on hand. Alternatively, you can swiftly and easily snip the stitches using an Exacto knife.

Alternatively, you might use a seam ripper. Sewing on the wrong cloth will be the most difficult element of the process. Sewing a new set of stitches over the old ones, if the weave is loose or delicate, may be the best solution.

A fine needle, inserted between the stitches, would be your final option. Regardless of the path you choose, you’ll need both time and patience. It’s going to take a while to complete this task.

How to Remove Two-Part buttons

Time is the most important component in this procedure. All it takes is time after you’ve got the correct equipment. Sewing’s “brute force” section includes techniques like these.

  • 1. The use of two pliers

Use one set of pliers on each side of the button. To avoid distorting the button’s shape, use a strong grip but not too tight. Then, using a twisting motion on one of the two halves, you can free them from their bond.

Just pull the buttons apart as soon as the grip is freed. Ask your partner or child for assistance if you aren’t sure you have the strength to grip both pliers and pull.

  • Method #2: Screwdriver and pliers

To do this, you’ll need a flat-head screwdriver. You won’t be able to use anything else for this job. You may loosen the buttons by wriggling the screwdriver around.

Once you’ve loosened the grip, grab the button with your pliers and pull it apart with one side. Pulling the two sections apart may still necessitate a screwdriver.

  • The wirecutter technique is third.

Cutting the metal apart and removing the button is an alternative if you are having difficulty with the pliers or screwdriver. So, of course there is no way to reuse it after you do that. The button must be replaced.

Removing Rivet Buttons From Jeans



Anguish is the only word that comes to mind when I think about this. Most individuals have shirts in their wardrobe that require new buttons, and regular sewn-on buttons may be removed in a matter of minutes. Sewn-on buttons can come off as soon as you glance at them if the stitching is poor.

When it comes to 2 part rivet buttons, they are far more difficult to remove from your jeans or denim jacket. After a little old-fashioned coaxing, they will come off.

Removed buttons are longer to remove than sewn-on buttons, but they are not as time-consuming to put on. It will take a few minutes to release the hold and separate the two halves..

When attempting to disassemble the button, be aware that small parts may fly your way. Take a few precautionary steps to ensure that you or a pet or one of your children do not get hit by one of the pieces.

How to Sew a Jean Button Back On

Buttons from denim shirts are more likely to be sewn back on than those from jeans. After that, you’d proceed as you normally would with any other button-up shirt in need of a replacement button.

Most jeans and jean jackets have a two-part button; all you need is a hammer and the two components to put it on. You can get away with a 16-ounce hammer. You may not be able to seal the two halves together if you use something lighter.

Jean button tool is needed when you get your hammer. When you’re ready to strike, the two pieces of plastic are held in place by a flexible piece of plastic. It also shields the metal button from being damaged.

A patch over the original hole, sewn on before hammering the button back in place, is a smart idea when re-attaching the button to the same area.

Reusing Snap Buttons



Whether or not this is a good idea is up for debate. The snap component of the button may be deformed and unable to hold firmly to the other part of the button, making this difficult for most people.

The majority of advise was to buy new snap buttons rather than utilizing the ones you already have. There is also the issue of the hole they leave behind. Either patch those up or use new buttons for the new location if you decide to leave the originals in place.

Using the old snaps will need you to cut a strip of cloth surrounding them and put that strip into your sewing project. Snap buttons often have a single purpose before being discarded.

Can You Reuse Upholstery Buttons?

Upholstery buttons can be reused if the style and form of the button allow for it. When reusing buttons, you’ll want to make sure they’re in good condition. Don’t expect them to last very long or even look well in their new location if they aren’t properly cared for.

Reusing old upholstery buttons in sewing projects is a great way to save money. Those projects can be found with a quick search on your computer. Once you obtain the findings, you can take your time and choose the project that most interests you.

There are a variety of ways to attach buttons to your new project based on the type of the button. You might also use a hot glue gun as an alternative. It is up to you to decide which approach is best for the project you are working on.

Can You Reuse Covered Buttons?



Covered buttons can most likely be reused. The thread holder’s state is the lone snag in the scheme. A needle and thread may not be the best option if it’s in poor shape or has been damaged in any way. This is when you may have to resort to glue.

A variety of methods are available to freshen up those buttons. You can decorate the button covers with mod podge, paint, markers, and other materials.

The way you attach those buttons to your next craft or sewing project may also have a role. Because of the materials used to connect them to their initial location, you may not be able to reuse them.

Just take a look at the buttons and see if they work with your new ideas if they are in good condition.

How to Reuse Covered Buttons

When it comes to reusing the buttons, there’s no limit to what you can do with the material. Only their state, design, and color, as well as your project’s specifications, will be a hindrance.

If you’re looking for a unique bracelet or necklace, you might use a variety of colorful buttons to make one. You can even paint them the same color to make them more imaginative and appealing.

To connect the buttons to the cloth, one individual used paint, mod podge, and a small amount of adhesive, such as gorilla glue, hot glue from a gun, crazy glue, and so on. There is no requirement that you use sewing needles to sew the buttons in place.

Search for creative button projects that utilize up old buttons you’ve gathered over the years to gain ideas.

Some Final Words

If you’re looking for an easy way to remove or attach a button, this is definitely the best option. If done correctly, the hold you gain should last for a long time, even if brutal force is required.

To expedite the process, use the 2-part button hole tool.