Updated at: 25-12-2021 - By: cnbusinessnews

Sewing presents many challenges. When you sew, you’d like to be able to take some quiet time with yourself so that you can sew and think. But, there are always challenges that interfere with your plans and slow down your sewing time.

A bobbin thread that is tangled is one of the most frequent problems that any user of a sewing machine will face. Although the issue is not difficult to fix however, the bobbin could not be the cause. Sometimes, the needle, threading, or other problems are the root of the issue. Re-threading can help solve the issue.

For more information about the different problems with sewing machines and how to resolve them, go through our article. The tips in this article will help you save time and lots of stress when you discover the various ways to solve the problem.

How to Troubleshoot Sewing Machine Bobbin Problems


The first thing to do is to identify the most common issues that could cause problems in the sewing equipment. One of those issues is when your machine fails to stitch or is doing other strange things.

Although you might suspect that you have too much tension on the thread of your bobbin but it’s not the cause. After confirming that the tension and bobbin are in good order and your needle is in good condition, you should check it. It might break, bent, or damaged in any way.

Then, you must inspect the bobbin whenever thread strands begin to get caught under your clothing. If the thread is straight and evenly wound it isn’t the reason for your issue.

The bobbin is falsely accused of doing things it has nothing to be involved in. One of the most difficult challenges to solve is to identify the culprits and typically, you can eliminate the bobbin frequently. It is usually the first source when something goes wrong.

Singer Sewing Machine Bobbin Problems

The majority of Singer Bobbin problems can be resolved if you spend the time to review the owner’s manual. In the manual, you will find an inventory of problems that may or will occur from your bobbin as you sew.

In addition, there is an array of solutions. In the event that the manual you have for your vehicle isn’t available, here are some tips to help you resolve those issues when they occur:

First If the stitches are not even or irregular, you might need to wind the bobbin again if the thread isn’t even.

Second If your needle is dull , it won’t be able to pick up the thread of your bobbin.In this particular instance,It is necessary to change the needle to a new needle. Thirdly, if the thread on your bobbin breaks, it is a sign that you haven’t threaded your sewing machine properly. Re-threading can solve this issue.

Then the thread of your bobbin might break or become jammed if there’s too much lint. It could fall into your bobbin’s case. It is necessary to wash the case so that the thread can run normal.

Bobbin Case Problems


One of the fundamental and most common issues that can arise in the bobbin case is that you might not have put the bobbin in the correct way. There are a few sewing machines that are able to insert their bobbins in the same manner. Singer for instance, is equipped with both a clockwise and counter-clockwise position. The one you choose is dependent on the machine you are using.

Another reason to consider is that the bobbin case has become filthy. Thread and lint are prone to accumulating on your bobbin case, create a mess. What you need to do is get rid of the bobbin case completely and then do it regularly following the fact.

Another issue could be the oil wick in the 6500 Janome drys out and causes your needles and the bobbin case to be in trouble. A fresh drop of oil will solve the issue without making an mess or spreading oil all over the place.

Bobbin Case Not Turning

There are a few possibilities for solving this issue. The first is that the thread tension of your bobbin is too high. If this is the case, it’s possible that your bobbin doesn’t move. The only thing you need to do is adjust your tension, then double-check to ensure that your bobbin continues to turn.

The other reason is because your bobbin thread is getting twisted up with uneven tension. To correct this problem you’ll need an entirely new bobbin. You should wind the thread gradually and ensure the tension is even.

Replace the old bobbin with a new one, and start sewing. Double-check the tension too. You don’t want to face this issue right after resolving it.

Bobbin Case Stuck in Sewing Machine


It could be a challenging fix the issue with an Singer sewing machine. Sometimes, small bits of thread and lint can go deep into the bobbin’s case or the bobbin and cause it to become stuck.

What you have to do is take the flashlight, shine it through the the bobbin’s case. Check to see whether you can see the lint. If yes, you should grab the tweezers out and remove the lint. If this fails or you can’t see the tiny lint you’ll need seek out an expert repairman to get the job done properly.

If you have a Brother sewing machine, these steps can aid in solving your issue: The first step is to turn the machine off. Then, raise your needle to the highest point and then remove it. Thirdly, take off the presser foot as well as the holders.

Fourth, take off the cover of the needle plate. the next step is to make use of the disk-shaped screwdriver, and loosen two screws the plate. Sixth, take out the bobbin and bobbin case.

Then, put the bobbin back together, to match the marks on your bobbin and the mark on the machine. If the issue persists you can bring it with you to an expert repairman at Brother resolve the issue.

Loose Bobbin Case


This Touch and Sew model of sewing machines is known for its history of having this problem. It is recommended to bring it to a professional to fix it as it might not be fixed through DIY.

This particular model of sewing machine isn’t well-known because of this issue. It is possible to request the money you paid back in case the machine is still in warranty, or offer it to someone else because it’s a challenging machine to repair when this issue arises.

A previous cause could be the cause of the issue as well. If you hear a click or similar sound coming from the bobbin’s case, it might be time to get it cleaned. The one thing you shouldn’t do when the machine is in warranty is not to touch the screw within.

The screw is factory-set and could lead to issues with your warranty when you screw it in incorrectly, or in the wrong direction, etc. Another alternative could be to take the machine to a repairman, and let them fix the issue and then fix it again after the warranty expires.

Singer Bobbin Holder Problem

It could be that the bobbin case isn’t functioning properly and you need to replace it with a brand new one. The steps to take are the following:

  • Then, if you are using Firs to Make sure you switch the power supply on the device off, or simply disconnect it.
  • Second take a look at the bobbin cover , and remove it. No screws are holding it.
  • Third Third, Pull the lever that releases the bobbin’s case move away from case. A hinge allows this to happen.
  • Fourth Fourth case over the spool in the compartment.
  • Fifth Put the lever back , making sure it’s snug to the case of the bobbin. If you’ve done it correctly, the lever will lock automatically.
  • Sixth Test the case to see if it is snug. Too loose and it will be ripped off during sewing time.
  • Then remove the cover and sew again.

Why My Bobbin Keep Jamming?

Why-Does-My-Bobbin keep-Jamming

The reason this issue began to arise is that you might have not done regular maintenance and add oil into the machine. Lack of oil can result in your bobbin jamming while you work.

Three other issues could be that the machine is filthy and the thread wasn’t properly threaded and the tension might be not tight enough. Each of these problems does not require a repairman solve. You can fix it yourself and return to work in just a couple of minutes.

When the equipment is filthy particularly around the bobbin area Clean it. If you have threads that are not properly threaded it is necessary to stop the work and re-thread your machine. If tension has become too stiff, simply loosen the tension until the bobbin starts to spin again.

The majority of issues that occur from the bobbin require a trip to a repair shop or to the dealer. It is possible repair them without violating your warranty.

Bobbin Thread Jamming Up

The same issues that were mentioned earlier are typically the cause for this issue. Before starting sewing, you must conduct a quick test to ensure that the thread on the bobbin is moving in the correct direction. This will help you avoid hassle and stress since it won’t hinder your sewing.

If you can see the thread running well and you are capable of completing your work easily. If your thread continues to jam and the issues listed above do not cause the issue it could be that you not have the correct bobbin on the machine.

This error can occur because many people are unaware that not all bobbins are the same size and fitting. If your bobbin is not in alignment, you might need change it out with a new one.

The final reason for problem could be that you began sewing along the edges of your fabric. Knots have already formed and are jamming your machine.

Bobbin Winder Problem


This is a problem that may arise at times. You might notice your needle move up and down when you attempt to wind the bobbin. The reason you see this is because your bobbin’s winder was not disengaged correctly or in a timely manner.

There could be two causes for this problem growing, and the fix isn’t difficult to fix. The first is that there could have some old oil in the machine. If that’s the case, you’ll need to wash the old oil completely and maybe put some fresh drops into the machine.

The other reason could cause the fact that the ring that is under the bobbin winder’s clutch is not in the correct position. Here’s a link to the complete instructions which are a bit more thorough to fit in the space we have here.

To cut a long story short, you need to place the ring back in its original place.

Bobbin Tension Repair

This is the most straightforward fix. If the tension of your bobbin has become too tight you’ll need move the screw counterclockwise to loosen it. If your tension seems too loose move the screw clockwise in order for tightening it.

You can also aid your bobbin to work by altering the tension of the needle thread. If your bobbin requires to be working a bit harder than it is, you can reduce the tension on the needle thread just by a little. Make sure you tighten it if it isn’t.

Be sure to take some tests to see whether you’ve solved the issue or not.

Some Final Words

You now have more information on how to solve bobbin problems. It is essential to note that the problem with your bobbin might not be related to the bobbin itself, its thread, or even its case. It could be the result of your needle, or in other components.

Do not assume that it’s the bobbin when an issue occurs. The bobbin is often blamed for things it didn’t do. You can make a checklist of the places to look and place an option for fixing in the spaces between the entries.

If it’s not one of those components, then it’s most likely the Bobbin.