How to Fix Sewing Machine Stuck in Reverse? Troubleshooting and Repair Guide

8 min read

It is not possible to use the reverse stitch option on all machines. Some sewing machines are only able to sew forward and cannot move backwards. A small nuisance, unless your machine is equipped with a reverse stitch and it fails to work properly.

When lint or a stray thread gets caught within the button, it can cause the reverse lever or push button to become stuck. This is intended to be an extremely rare event. That problem will be solved and prevented from recurring again if you give your home a thorough cleaning.

Continue reading this article to discover more about the issue of reverse stitching. It outlines some of the difficulties you may encounter and provides some answers. These remedies may help you if your reverse stitch lever malfunctions, so give them a try.

Why is My Reverse Stitch Loose?



There may be an issue with the machine’s mechanics if you notice loose stitches. Before having your sewing machine dismantled, check the tension first. Before attempting a significant repair, always check out the simplest options first.

Timing could be a factor if the tension isn’t a factor. The sewing machine will not sew as usual if the timing malfunctions. For the sewing machine to work correctly, every part must function exactly as it is intended to.

Those components’ behavior can be off and cause havoc if the timing is off. The qualified repairman is the only one who can do timing checks. There could be a problem with the needle or thread in your sewing machine if that is the case.

Choosing the incorrect needle and thread for your project is preferable than using the incorrect needle and thread altogether. Even when sewing backwards, it is critical that the thread in the bobbin match the top thread. Finally, if you haven’t cleaned your sewing machine in a while, your stitch results will be affected.

Reverse Stitch Button Not Working



This predicament could happen for a number of perfectly reasonable causes. It’s not always the dirty machine’s fault, but it might be, even if it’s a rare occurrence.

Worst of all, the lever or button has malfunctioned and you can’t use it anymore. Until the problem is resolved, the machine will not stitch in reverse or stay in reverse mode. However, if you find yourself in this position, the news becomes even worse.

Somehow, it’s possible that the lever’s operational spring has become distorted. Changing direction is impossible when it happens. In our opinion, this is bad news because it is a difficult repair that requires the skills of a professional to do.

The automatic lockstitch is a feature that can be found on contemporary sewing machines. That function, if used, prevents the machine from sewing in the opposite direction. In order to go in the opposite way, you must switch to a standard stitch pattern.

It’s time to double-check that your stitch length is correct. There will be no sewing in either direction if the value is zero, and there will be no sewing in reverse if the value is too short.

How to Fix Sewing Machine Stuck in Reverse



First, check the machine to determine if it is unclean and there is some lint or other impediment that is preventing your sewing machine from operating properly. This and any other issue with your sewing machine can be resolved with a thorough cleaning.

To examine the spring on the backstitch or reverse lever, you’ll need to remove the needle. If it’s broken, you need to get a new one immediately. If it’s only slightly bent, you might be able to get someone else to straighten it out for you. Replace it if it’s severely bent, as straightening it won’t fix the issue.

It’s possible that part of the lubricating oil or grease in your machine dried out. Simply heat the button or lever with a hairdryer for a few minutes if this is the case.

When this is done, the lever or button should fall loose. Only older mechanical sewing machines can benefit from the hairdryer method. If you have a newer equipment, it’s preferable to leave the repair to a trained professional.

Janome Reverse Stitch Not Working



A faulty part inside the machine will generate a clicking sound but not move the feed dogs backward. You can’t fix this at home, unfortunately. A Janome-trained repairman should be used to ensure the job is done correctly.

As a result, the oiling point indicated E in the handbook of a MyStyle 5072LE commonly becomes clogged with oil and lint. In this case, the E oiling point has been highlighted since it serves as an oiling point for the reverse mechanism.

When it gets gummed up, a good cleaning is required, but mineral spirits should be used to remove the oil from the mechanism and then new oil should be replaced. The 4623le’s mechanism may just be a tad jumbled.

Your repairman can handle the problem if you don’t want to do it yourself. Try it out first, though, because it only requires a light cleaning. There is a possibility that a part may be broken so sending it off to the repair shop may be more beneficial as the experts will see what is wrong and fix the problem.

Kenmore Reverse Stitch Not Working



Sewing machines from a variety of manufacturers have a slew of flaws. All sewing machines have issues with reverse stitching at some point or another, and one of the most common reasons is lint or other debris blocking the mechanism.

It’s as simple as checking to determine if your machine needs cleaning and completely cleaning the reverse mechanism if it does. or the gearbox may be faulty. The only option is to take the equipment to a Kenmore-trained repairman if that is the problem.

Because these repairmen have access to the comprehensive service manuals created by each manufacturer, we tend to become brand-specific. They are intended solely for use by mechanics. Repairing a brand-specific vehicle is easier since the technician has access to more information.

It’s also a good idea to double-check your stitch length and controller. If that is the case, your Kenmore may not be able to stitch in reverse. The spring that aids in the mechanism’s reversing may also be damaged. If this is the case, get in touch with a dependable repairman.

Brother Sewing Machine Reverse Stitch not Working



Sewing machines that fail to sew in reverse can have a variety of issues, which are detailed on various web pages for this particular sewing machine brand. On one page, you’ll see the usual suspects: a dusty or linty area under the needle plate, an inadequate stitch length, and a stitch pattern that doesn’t permit reverse stitching.

According to their web pages, if none of these problems are to blame, you should take your sewing machine to a Brother-approved repairman for service.

It’s possible that you didn’t hold down the reverse button for the first 3 to 5 stitches and that’s why the reverse stitch function didn’t work. Press and hold the button for 3 to 5 seconds before turning the machine back on if it gets stuck. Make sure the machine moves forward or backward before proceeding.

Another issue is that if the bobbin is dirty, you’ll have to remove it and clean it. The bobbin can be reinstalled and you can hunt for a new supply if the region is clean. Let the mechanic handle it if it’s a mechanical issue.

Some Final Words

The reverse functionality on any sewing machine will occasionally malfunction, regardless of the manufacturer. Your repair may be completed in just a matter of minutes if you focus on the most frequent issues first.

Taking your machine to a repair shop if the basic fixes don’t work is the only option if the problem persists. Even if you pay the specialists, you’ll be able to sew again.



I'm an content manager