The best place to find Concrobium Mold Control is at a large hardware shop near you.
- How To Remove Mold From Inflatable Bounce House? Ultimate Guide Update 12/2023
- How To Get Rid Of Mold In Your Hair? Update 12/2023
- What Is The Most Dangerous Mold? How To Prevent Black Mold? Update 12/2023
- What is Mold? How To Remove Mold From Canvas Bags? Update 12/2023
- How To Clean Mildew Off Antique Wood Furniture? Update 12/2023
Concrobium is sold by big-name retailers like The Home Depot, Ace Hardware, and Kmart because it is an effective mold-killing agent. As a result, the next time you find yourself dealing with an infestation, head on over to your local hardware shop and pick up some disinfectant!
What Is Concrobium Mold Control?
Using bleach as a short-term mold cure will cause your surfaces to discolor, as you’ve probably heard. Thanks to Concrobium, you don’t have to use bleach to get the job done.
It’s also free of ammonia and VOCs, so you can use it in your own house. Mold spores are killed at their roots by this new cleaner, which also leaves a barrier that prevents the spores from regrowing.
Where Can You Use This Cleaner?
Concrobium has a wide range of applications. Make use of it in the following ways:
- Ample room
- voids in the wall
- Empty homes
- Areas that are difficult to access, such as crawlspaces
Cleaning rough objects like walls and furniture is also possible with this product. A wide range of surfaces can be cleaned with this product.
- Upholstery and Furniture
One spray bottle and a few wipes will take care of all your mold issues!
Benefits Of Using Concrobium
Homeowners love this cleaning chemical for its effectiveness and affordability. The return on your home’s value will be excellent.
1. It works on all surfaces
It doesn’t matter what you use Concrobium on, it will work. Walls, floors, and even furniture can be the subject of graffiti.
Even unpolished surfaces are no match for it. Before using Concrobium, you no longer have to worry about applying a sealer.
2. It leaves a mold prevention barrier
Use this cleaning to stop an infestation from starting before the spores have even begun to proliferate, as it leaves a protective layer on surfaces.
If your basement, bathroom, or windows are prone to mold, this is great news! Concrobium can be a lifesaver in areas of the house that are continuously exposed to moisture.
Keeping mold from growing on your home’s windows is a common issue.
3. It’s safe for you to use
You don’t need any specific equipment to use Concrobium because it doesn’t include bleach or ammonia. You can simply use your regular goggles, gloves, and mask.
Where Can You Buy This Mold Cleaner?
It’s also not difficult to locate Concrobium! Every big hardware store carries it.
So if you have a mold problem, all you need to do is take a quick drive by! You can buy as much as you need because it’s cheap.
1. The Home Depot
As a household name, this hardware store is a household name. Concrobium is available in a variety of sizes, ranging from 14 ounces up to 1 gallon.
2. Ace Hardware
Another prominent hardware store provides 32oz spray bottles of the cleanser. It’s also available for purchase here at a fair cost.
KMart provides Concrobium in a variety of sizes, including 5 gallons. Additional items, such as moisture control grabbers and stain removers, are also available from them.
Concrobium can be purchased at this hardware store for the lowest price. On a shoestring budget, this is ideal.
This cleaning product is also available at Do It Best and Menards as well as at Kroger and Orchard as well as True Value and Norkan. Check out the nearest store for the finest options.
Step-By-Step Process On How To Apply Concrobium
It’s time to get to work with your Concrobium now that you’ve purchased it.
Make no fear; it’s one of the most straightforward cleaners to use. Concrobium’s use is explained in detail here.
Step #1. Clean the area
Before using the product, be sure all of the mold has been removed. The spores will be easier to reach this way.
You can use Concrobium for the initial cleaning so that it doesn’t come into contact with other chemicals.. You can omit this step if you’re using the cleaner as a preventative measure.
Step #2. Apply the cleaning agent
Your moldy surface can be treated by spraying it with a thin, even layer from the bottle. Allow a few minutes for it to dry.
Step #3. Wipe away the residue
This step will make drying faster, and it will remove any unwanted stains. It will also scrub away any spores left on the surface.
This procedure helps speed up the drying process and remove any stains that may have accumulated. It will also get rid of any remaining spores.
Step #4. Apply the protective layer
You can reapply the Concrobium to ensure that the mold does not return. Insects will no longer be able to infest your home.
Concrobium Mold Control Review
An experienced water damage restoration firm owner believes this Concrobium Mold Control review will be useful to both homeowners and mold removal specialists. An IICRC-certified mold remediation professional like me can help you get rid of mold (Institute of Inspection Cleaning and Restoration Certification, a non-profit organization for the cleaning and restoration industry). Mold removal and cleaning on structural materials was always done using a biocide for years on end. My personnel had to use respirators and protective clothing while applying this product because it was poisonous, required a total occupant evacuation (even pets), and necessitated the use of respirators. Adding harmful chemicals to any interior environment is now widely recognized as a terrible idea by both homeowners and mold removal specialists alike.
Many professionals now regard the use of a biocide to destroy mold to be an outdated technique. In addition, dead mold can still pose a threat to those who are allergic to mold, mold spores, or the mycotoxins they create if it is left in place. My armory of mold-killing products now includes Concrobium Mold Control as well as a biocide in some circumstances. No bleach or toxic chemicals are used in the production of Concrobium Mold Control. In addition, it is safe to use on a wide range of materials including wood and laminated surfaces, as well as concrete and siding.
Concrobium Mold Control – Case Study
Concrobium Mold Control came in handy on one particular mold remediation project I had worked on. I performed a mold treatment on a 1901-built house. This house featured an attic on the third floor. In the center, it was more than 8 feet high and you could easily walk erect. Mold was found just on one side of the unfinished attic ceiling. Mold was visible on the other side. In light of the fact that the home’s owner was a full-time babysitter, I didn’t want to rip off the entire side of the roof.
Spray bottles and aerosol cans of Concrobium Mold Control are available, however we used pump-up sprayers and gallon buckets to apply the chemical to the inside of the roofing material for this project. Since no special clothing or ventilation is required concerning occupants, we felt safe using it in the attic with the access door closed, while the owner and the children remained on the first and second floors of the home. As a safety precaution against mold exposure, we wore N-95 full-face respirators and gloves while applying the product. The Concrobium was allowed to dry and we did not wipe it off. As Concrobium Mold Control dries it creates a barrier that kills, then contains the mold, then acts to prevent the re-growth of any mold.
For this project, we used a pump-up sprayer to dump gallon containers of Concrobium Mold Control into, and then sprayed the product over, the inside of the roofing material. While the owner and their children remained downstairs, we were able to use it in the attic with the access door closed because it didn’t require any specific clothes or ventilation for people. We used N-95 full-face respirators and gloves while applying the solution as a precaution against mold exposure. We left the Concrobium to dry without wiping it down. After drying, Concrobium Mold Control forms a barrier that kills and confines mold while also preventing its regrowth.
Our pump-up sprayers were then utilized to apply Mold Control to the concrete walls after we used a HEPA vacuum to clean them. We used a dehumidifier after the Mold Control had dried to remove any remaining moisture. Finally, the outcomes were fantastic. After that, we gave the house a fresh coat of paint, which the owners loved. The house was listed, sold, and the basement was found to be in excellent condition. Here are a few examples.
Concrobium Mold Control Advantages
You don’t have to use this product only on your home’s structural elements. Seat covers and cushions can also be used on boats, boats, boats, furniture, and fabrics. Mold Control should always be tested first in an inconspicuous location before being used on any form of furniture or fabric.
- Any surface, no matter how rough or smooth, can benefit from its use.
- Forget about it – a protective barrier is actually left behind that prevents any mold from growing back.
- Mold Control removes mold and its odors from the affected area.
- There’s no need for any kind of specialist safety gear (you should wear goggles, gloves and a N-95 rated dust mask or respirator to protect you from mold and mold spores).
- In ultra-low-volume foggers, it can be employed. Thermal foggers are not suitable for its use.
- Mold Control doesn’t include any bleach, VOCs, or ammonia.
- As a preventative precaution, it can be used BEFORE mold growth has begun.
- Concrobium Mold Control has been approved by the EPA for use in the United States.
Concerns About Using
Concrobium Mold Control has a few minor drawbacks, the most notable of which is that it has no effect on the mold stains that have been left behind. Using Concrobium will have no effect on any stains that has occurred over time because it does not include any bleach or whitening ingredients. When mold stains appear on a surface, many people assume that the mold eradication process was not complete or that it was done incorrectly. Mold Stain Eraser is a mold stain remover manufactured by Concrobium. People are tempted to clean the stained areas since they can still see the blemish. This damages the shield barrier that prevents molds from returning in the first place.
Purchasing Concrobium Mold Control
Many home improvement businesses and online retailers sell Mold Control products. The price of a two-pack of spray bottles is around $25. About $10 for a can of aerosol and about $35 for a gallon. There is a Mold Stain Eraser product from Concrobium available on Amazon that can remove any stains that may be left behind. Since it doesn’t contain any bleach, you can use it both inside and outside your home. About $25 is the price at which it’s now available.
Got questions about Concrobium Mold Control?
We’ve got the answers you’re looking for. To inquire about something that is not listed here, please feel free to reach out to us.
Why is EPA registration important for an antimicrobial product like Concrobium Mold Control?
Any product claiming to eliminate or prevent fungi or mold requires registration with the US Environmental Protection Agency. Registration is issued after review of efficacy data.
Is Concrobium Mold Control EPA-registered?
The Environmental Protection Agency (EPA) mandates registration of any product that makes a claim to be fungus- or mold-killing or mold-prevention. Once the efficacy data has been reviewed, the registration will be issued.
I see Sodium Carbonate listed on the label. Is Concrobium Mold Control just Sodium Carbonate (washing soda) and water?
No. However, the Concrobium Mold Control label lists sodium carbonate as the active component, but the solution actually contains a proprietary tri-salt polymer that is capable of eliminating and preventing mold when it is coupled with the sodium carbonate and the water. (Against mold, Sodium Carbonate and water are ineffective.) No bleach, ammonia, or volatile organic compounds (VOCs) are present in this solution. Our MSDS is available for download from our company’s website.
Can’t I just use bleach to get rid of the mold in my house?
Bleach can be hazardous and offer a health danger to those using it as well as those in the surrounding area, thus caution should be exercised when using it.
On porous surfaces like drywall, timber, and grout, bleach is particularly useless in the fight against mold.
I’ve already treated an area with bleach. Can I use Concrobium Mold Control now?
As a result of the carbon layer left behind by bleach, Concrobium Mold Control cannot reach the mold roots or hyphae. This may limit the product’s usefulness. ‘ If you’ve previously used bleach to clean a moldy spot, you should first use warm water and dish detergent to remove the bleach residue. Apply Concrobium Mold Control as directed in the usage directions once the area has dried.
Can I add bleach to Concrobium Mold Control?
Mold removal using Concrobium Mold Control has never been easier. Concrobium Mold Control’s effectiveness will be lowered if any other ingredients are used.
Do I need to wear a mask when using Concrobium Mold Control?
There are no VOCs in Concrobium Mold Control, and it does not emit any. But if you’re in a location where there’s a lot of mold, you might want to consider wearing a mask to prevent yourself from inhaling mold spores that could be damaging to your health. It’s a good idea to avoid inhaling too much moisture from the fog during defogging.
Do I need to evacuate the area when using Concrobium Mold Control?
No, Concrobium doesn’t include any of those things. During use, the area does not need to be evacuated.
Is Concrobium Mold Control safe around animals?
Yes. Animals cannot be harmed by the residue that is left behind.
I can’t find your Material Safety Data Sheet (MSDS)?
Please go here to read Concrobium Mold Control’s Material Safety Data Sheet and other technical information.
How much Concrobium Mold Control do I need?
Because the product works as it dries, only a light misting of the surface is required to for it to function. Avoid overdosing on the lotion because it can leave behind a white residue when it dries. If there is any residual, simply use a dampened Concrobium Mold Control towel to remove it.
What kind of surface coverage can I expect from Concrobium Mold Control?
Surface absorption and application method will influence the amount of coverage. The more product used, the more porous the surface (such as textiles). Drywall, wood products, and cinder blocks are more absorbent than painted or smooth surfaces like vinyl or poured concrete because of their raw building elements. Only a half-gallon of fog will cover a 20′ x 20′ room’s whole interior walls, ceiling, and floor, which is about 1,400 square feet. If you’re using a compression or garden sprayer, a fine mist nozzle should cover 350-450 square feet of surface area.
Can I use Concrobium Mold Control in the kitchen?
Yes. It’s safe to use in food preparation areas because Concrobium Mold Control doesn’t contain any harsh chemicals like bleach, ammonia, or alcohol.
Can I use Concrobium Mold Control in the shower?
Yes. With Concrobium Mold Control, you can eliminate and prevent shower mold. In order to maintain microbial resistance after repeated exposure to water, it may be necessary to apply the treatment more frequently.
Is Concrobium Mold Control septic safe?
It is, without a doubt! Concrobium Mold Control is safe for septic systems because it is composed of water and food-grade, inorganic salts.
Can I use Concrobium Mold Control outside?
The primary goal of Concrobium Mold Control was to eradicate and prevent mold in the home. Both Concrobium House & Deck Wash and Concrobium Mold Stain Eraser are non-toxic and bleach-free outdoor products that are great for cleaning moldy outside surfaces. Antimicrobial registration for these products does not exist. Mold development is not stopped or stopped by using these products.
How often should I apply Concrobium Mold Control to prevent mold growth?
Molecular bonding means it is extremely tough to eliminate Concrobium Mold Control. You may, however, need to reapply the solution on a surface that is constantly exposed to water (e.g. leaking, washing or running water) in order to retain mold protection.
I sprayed Concrobium Mold Control on the surface and let it dry, but the mold is still there. Why?
No bleach or whiteners are found in Concrobium Mold Control. As soon as you’ve sprayed and allowed to dry the solution on the moldy surface, the mold will be encapsulated and removed, effectively ending your mold problem. Concrobium-dampened cloths and brushes can be used to remove stains and residue from the surface. Alternatively, take other cosmetic procedures to improve the appearance. Remember to apply a layer of Concrobium Mold Control to the surface once the cleaning process is complete in order to prevent mold growth.
What technique do you recommend for applying Concrobium Mold Control?
Concrobium Mold Control can be applied in a variety of ways, depending on the size of the area to be treated or the accessibility of the area, such as walls, using a pump sprayer, brush, roller, or cold fogger (large, enclosed areas like basement or attics).
Will Concrobium Mold Control penetrate drywall / flooring / other barriers. What if the mold is growing behind the wall?
To be effective, Concrobium Mold Control must come into contact with the moldy surface. In order to treat the area, you must either remove the drywall or discover an opening where Concrobium Mold Control may be sprayed. A solid barrier will not allow the solution to go through.
How long does Concrobium Mold Control take to dry?
Depending on the humidity and temperature in the area, and the surface to which it was applied, drying time can vary. In most cases, it will dry within two hours. Allow 24 hours of drying time if you plan to paint over the Concrobium Mold Control treatment. After a fog has cleared, open the windows to speed up the drying process and allow fresh air to enter the room.
Will Concrobium Mold Control freeze?
It is possible for Concrobium Mold Control to freeze at temperatures below zero degrees Fahrenheit. Even if the product freezes, it can be thawed and used again by stirring or shaking it.
Does Concrobium Mold Control expire?
Mold control using Concrobium Mold Control is permanent.
There are no expiration dates on products marketed in the United States. Health Canada mandates the printing of an expiration date on Canadian food labels based on information provided by the manufacturer. As a result of our study, we’ve set the product’s expiration date at five years, however our data shows that the medication is still effective after that time period has passed.
What is the optimal temperture to apply Concrobium Mold Control?
Concrobium Mold Control works best when applied at a temperature of 10°C (50°F). Remember, if you don’t allow the product to dry, it won’t be able to do its job.
My front-end loading washing machine smells moldy sometimes – can Concrobium Mold Control help?
With regard to front-end loader rubber rings, we’ve had customers report favorable results… test it out! (However, wait until it has dried completely before running the machine again; Concrobium Mold Control only works once it has dried completely.)
How long will Concrobium Mold Control last?
If there is no water or humidity problem in the region, one application should enough. Due to running water or significant humidity or condensation, showers and bathtubs may necessitate more frequent treatment than other places.
Can Concrobium Mold Control be mixed with water?
No, you should not dilute the product because it is ready-to-use.
Can I use a sprayer to apply Concrobium Mold Control?
Do compression or garden sprayers (which may be purchased at your local home improvement store) work well for covering large, easily accessible surfaces? Using the nozzle that produces the finest mist is critical. Make sure the solution is evenly coated after spraying by wiping off any excess moisture with a paper towel.
Can I paint over Concrobium Mold Control?
Yes. Concrobium Mold Control-treated surfaces can be painted using regular household paints. If you want to remove mold from a surface before painting over it, use a solution to clean the area first. Repaint after the surface has dried. Retreat the newly painted area with Concrobium Mold Control to prevent regrowth – first ensuring that the newly painted surface is dry.
If I’m painting a moldy wall, do I need to treat with Concrobium Mold Control before priming?
Yes. Concrobium Mold Control should be applied to the moldy surface prior to painting or priming to guarantee that the mold does not grow through the paint or primer. You can then proceed with your painting project once it has dried. After the paint has dried completely, reapply Concrobium Mold Control to the finished wall to ensure that the area will be free of mold development for the foreseeable future.
I used Concrobium Mold Control and nothing seemed to happen. Am I doing something wrong?
To get rid of the mold, Concrobium Mold Control encapsulates and breaks the spores down to their root structure as soon as it dries. However, you can rest confident that this activity is taking place. Since this treatment doesn’t contain any bleaches or whiteners, removing the mold stain may necessitate some mechanical action on your part.
I used the product on damp basement walls where I have water coming in from outside. The mold came back after a week. What did I do wrong?
The anti-mold properties of Concrobium are activated as the product dries. Applied to a constantly moist surface, the product may never have a chance to dry and may never be able to do its job. Always fix the water infiltration problem before utilizing our solution, no matter what kind of mold you’re dealing with.
Does Concrobium have an odor?
There is no smell to Concrobium Mold Control.
Is Concrobium Mold Control safe to use around plants and greenery?
Does Concrobium Mold Control pose a risk to vegetation? As long as plants and grass aren’t covered, spraying Concrobium Mold Control straight on them isn’t a bad idea. Spritzing or misting plants with water may be an option if there is a lot of overspray that comes into touch with them.
On what surfaces can Concrobium Mold Control be used?
Hard and fabric surfaces can be treated with Concrobium Mold Control, which has been EPA-registered and proven to be safe and effective on anything from wood to tile to stone to masonry to fabric. If you’re still unsure, feel free to get in touch with us or perform a test on a hidden area.
Can I use Concrobium Mold Control on fabric?
No, Concrobium Mold Control does not work on cloth. You can use it on both hard and soft surfaces because it’s EPA-approved.
What do I do if the surface is badly stained?
In rare cases, however, the mold stains left on surfaces by Concrobium Mold Control may be embedded and difficult to wipe out even after using this powerful cleanser. Mold spores will be eradicated if you ensure that the treated surface is totally dry after the treatment.
Proceed to remove the cosmetic stain by painting a stained wall or utilizing grout whitener on a mold-damaged tile wall. Finally, reapply Concrobium Mold Control and dry the surface to guarantee that it is protected from future mold growth.
Will Concrobium Mold Control discolor the treated surface?
The bleaching chemicals in Concrobium Mold Control do not discolor hard or cloth surfaces. It’s always a good idea to try Concrobium Mold Control on an inconspicuous area first, just like any other cleaning product. Only suede and billiard balls have been known to respond negatively to Concrobium Mold Control in our years of expertise. For whatever reason, it’s also been used to the latter.
Is Concrobium Mold Control safe for food preparation areas?
Yes. Before using food-contact surfaces, they should be sanitized.
Can Concrobium Mold Control be used on carpets?
Concrobium Mold Control is excellent for removing carpet odors since it collects and destroys odor-causing particles through its encapsulating effect. The carpet won’t be ruined, but it’s always a good idea to test on a small area first. Mold can form on the subfloor and under padding of your carpet if you suspect that it is present.
Will Concrobium Mold Control remove mold from tile grout?
Mold that has been growing in tile grout for some time may be difficult to remove because of the porous nature of the grout. The combination of Concrobium Mold Control and a stiff bristle brush will remove most mold from tile grout. Additional precautions may be required if the mold has been present for a lengthy period of time, though. To begin the process of eliminating the mold, use Concrobium Mold Control. Remove or conceal the stain with a grout whitener. Finally, use Concrobium Mold Control to reapply the protective barrier after it has dried and been cleaned.
Can Concrobium Mold Control be applied to wet surfaces?
Before spraying Concrobium Mold Control, it is best to let the surface to dry out to avoid diluting the product and reducing its effectiveness.
Will Concrobium Mold Control harm artwork? Can I use it on moldy artwork or papers that are moldy?
Paper or painted surfaces should not be harmed by Concrobium Mold Control. For valuable items, common sense should be applied. Remove everything you don’t want to get wet before fogging an area. If you’re unsure, try it out in a location that won’t draw attention.
Will Concrobium Mold Control remove mold from caulking around my tub?
Most surfaces, including caulking, can be cleaned effectively with Concrobium Mold Control. However, removing mold that has penetrated the porous caulking surface may be challenging. In certain cases, the best solution is to remove the old caulking, clean the area using Concrobium Mold Control, and then re-caulk when the area has dried. Once the caulk has dry, reapply the Concrobium Mold Control. Spray the area with Concrobium Mold Control and allow it to dry before removing the caulking. Then use a whitening product to remove any leftover stains. As a preventative measure against future mold growth, always follow up with additional Concrobium Mold Control.
When fogging Concrobium Mold Control, what contents should be removed from the room?
Remove or cover any items that you don’t want to get wet before fogging Concrobium Mold Control. This includes paper, books, and electrical equipment.
I have noticed some white residue after fogging on some flat surfaces – what is this?
Overuse of Concrobium Mold Control on non-absorbent surfaces will leave residue. This is to be expected and expected. When a solution sits on a surface, the water content evaporates off of it. Wipe away any remaining residue with Concrobium Mold Control-dampened cloths. For future applications, adjust the application rate accordingly.
What type of fogger or other applicator can I use?
You’ll need a cold fogger, one that doesn’t utilize a heater (i.e., NOT a thermal fogger). As long as no heat is supplied and no water is diluted, you can use any sort of electric applicator. A tiny mist can cause the substance to evaporate before it can reach its target. If you are using an airless sprayer, be sure to choose an appropriate nozzle to avoid this problem.
What is the difference between mold and mildew?
The fungus that develop on plants are called mildew. Mold is commonly thought of as a dry growth, but mildew is thought of as a wet one. Both are well controlled with Concrobium Mold Control.
What types of fungi (mold or mildew) does Concrobium Mold Control treat?
fungus and mold can be treated with Concrobium Mold Control. It doesn’t distinguish between different types of mold in its physical method of action.
Are Concrobium Moisture Grabbers safe to use around children and pets?
The contents of Concrobium Moisture Grabbers can’t leak or come into touch with youngsters or pets because the pouches are self-contained. Despite the fact that the pouches contain no toxic chemicals, it is important to keep them out of the hands of children.
The pouch opened and the contents got on my skin, what do I do?
Exposure to the materials should have no negative impact on health or irritation for the majority of people. Rinse thoroughly with water if any of the contents come into contact with your skin.
Where should I use Concrobium Moisture Grabbers?
Concrobium Moisture Grabbers were designed for use in small, tight locations where typical electric dehumidifiers are unsuitable (e.g. closets, bathrooms, cabinets, pantries, storage bin, safes, car and trucks, etc.).
Will Concrobium Moisture Grabbers dry out physical spots of water?
Physical wet spots will not be dried away by Concrobium Moisture Grabbers (i.e. water that has resulted from a flood or leak). If you’re looking for a desiccant product, Concrobium Moisture Grabbers are exactly what you’ll need.
This cleaning chemical is a wise purchase for the upkeep of your house. It’s inexpensive, yet it might provide the finest protection for your trouble regions.
Every homeowner wants to make the best possible decision when it comes to maintaining their property. Cleaning with Concrobium is a great way to get high-quality results without breaking the bank.
This brand is well-liked by hardware retailers due to the high quality of service it offers. After using this cleanser, customers will be overjoyed.
When you know where to acquire Concrobium mold control, you can make better use of your resources. You’ll get the best deal on the best protection for your house.